Thingiverse
Floor mounted magnetic door catch/stop by yure79
by Thingiverse
Last crawled date: 3 years, 4 months ago
Magnetic door catch designed to be mounted with double adhesive tape (3M or similar) on the floor and on the door, no nails or screws required. Door piece can also be glued on for more resistance to pulling.
Requires 4 button magnets of 10mm diameter, 1.5mm thick.
The door piece is also provided in a longer version with screw holes should screws be needed, i.e. if the door has a rough finish or if you experience detachments of the piece due to too much of a pulling force.
Since it's a sphere-based design, 0.1 layers are strongly suggested. I printed mine in marble-effect with 10% infill, seems strong enough and can seemingly take a good amount of abuse.
Requires 4 button magnets of 10mm diameter, 1.5mm thick.
The door piece is also provided in a longer version with screw holes should screws be needed, i.e. if the door has a rough finish or if you experience detachments of the piece due to too much of a pulling force.
Since it's a sphere-based design, 0.1 layers are strongly suggested. I printed mine in marble-effect with 10% infill, seems strong enough and can seemingly take a good amount of abuse.
Similar models
thingiverse
free
Magnetic Door Catch
...roken. to fix the two pieces, you have to use small screws. the holes have a size of 10mm. to insert the magnets, i used a clamp.
thingiverse
free
Magnetic door catch (adjustable) by D_Rogers
...ailable from harbor freight.
three magnets are required per catch - 2 magnets for one piece of the catch, 1 magnet for the other.
thingiverse
free
Magnetic Door Catch by hermanrock
...ed.
used #4 x 3/8" screw
magnet from harbor freight: http://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html
thingiverse
free
Magnetic door catch by zainframe
...magnetic door catch by zainframe
thingiverse
designed to fix my weak fridge door seals. requires six 20mm button magnets.
thingiverse
free
Magnetic catch door holder by dario_budimir
...
here are my designs for magnetic catch holder with neodymium magnets 10x3 and some m3 screw/nuts
hope will be useful to someone
thingiverse
free
MOAI Door Magnet Catch by johnniewhiskey
...
thingiverse
magnet and metal pieces taken from generic "cupboard door magnetic catch" in hardware or furniture store.
thingiverse
free
Magnetic Cupboard Door Catch by dazzadazzadazzadazza
...or catch by dazzadazzadazzadazza
thingiverse
door catch
2 x 10mm x 3mm magnets required plus fixing.
size is 50mm x 30mm x 20mm
thingiverse
free
Magnetic Dryer Door Catch by kungfujedis
... catch by kungfujedis
thingiverse
got tired of my dryer door closing on my head while unloading; designed a magnetic door catch.
thingiverse
free
Magnetic Door Catch by radexp
...tached to the floor.
the attachment is done using small nails.
both models have a 8x3mm hole inside to insert a neodymium magnet.
thingiverse
free
Child safety catches for drawers by becka
...no adhesive catch needed.
to open, pull open to the amount the catch allows, then press on the hook to release it from its catch.
Yure79
thingiverse
free
Post baseboard / skirting by yure79
... rubber, angled so that it does not need supports.
two prints cover one post nicely.
can be scaled accordingly and painted over.
thingiverse
free
Illy Iperespresso capsule gasket and mold by yure79
... perfect filling of the mold. when dry, extract the gasket, cut the four silicone prongs and presto! you are done.
happy coffees!
Catch
thingiverse
free
Catch by smb4122
...catch by smb4122
thingiverse
for catching items that fall behind a bed.
thingiverse
free
Door Catch by jjlee22
...door catch by jjlee22
thingiverse
simple door catch
thingiverse
free
Magazine Catch by pythonholum
...magazine catch by pythonholum
thingiverse
magazine catch for an ar15
thingiverse
free
Catch bin by Ultimaker
...catch bin by ultimaker
thingiverse
a catch bin that you can use on your ultimaker to catch prints when they auto eject.
thingiverse
free
Door catch by Ares566
...door catch by ares566
thingiverse
door catch with angle stop part
thingiverse
free
Large Catch by Shepshepard
...large catch by shepshepard
thingiverse
created a large catch based on the smaller design. 190x190.
thingiverse
free
catch mechanism by dscouch
...catch mechanism by dscouch
thingiverse
this is a catch mechanism designed to work with a release mechanism on thingiverse
thingiverse
free
Springy Catch by charliepsycho
...spring in it.
the catch could be used to retain a door, but i use it to hold a flat-screen tv on an arm back against the wall.
thingiverse
free
French Door Catch
...french door catch
thingiverse
door catch for a french door set to hold the doors in place.
thingiverse
free
Water Catch by synapticsmith
...water catch by synapticsmith
thingiverse
small, concave dish for catching water from a kitchen dish brush
Floor
thingiverse
free
flooring by WonderBread09
...flooring by wonderbread09
thingiverse
flooring
thingiverse
free
floor by akallabeth
...floor by akallabeth
thingiverse
floor for howa
thingiverse
free
Floor spacer for installing laminated flooring. by rice9300
...g laminated flooring. by rice9300
thingiverse
floor spacer for installing laminated flooring to set correct distance from walls.
thingiverse
free
Door floor guide
...door floor guide
thingiverse
door floor guide
thingiverse
free
floor slab by Vifzack
...floor slab by vifzack
thingiverse
this floor slab is for a cable channel.
thingiverse
free
Cover hole in floor
...cover hole in floor
thingiverse
used to cover holes in laminate flooring
thingiverse
free
floor pattern by hintss
...floor pattern by hintss
thingiverse
i found this pattern on a floor once.
thingiverse
free
Flooring Spacer by MeditatedStone0
...ooring spacer by meditatedstone0
thingiverse
flooring spacer 1/4 - 1/2 inch, 6mm -12mm
using to install my vinyl plank flooring
thingiverse
free
Stone Floor
...stone floor
thingiverse
for gaming and modeling
thingiverse
free
floor lamp by ayanev
...floor lamp by ayanev
thingiverse
stand for floor lamp, 27x27mm wood used.
Stop
thingiverse
free
STOP by Bricoloup
...stop by bricoloup
thingiverse
panneau stop
thingiverse
free
Picatinny Stop
...picatinny stop
thingiverse
picatinny stop
thingiverse
free
Door Stop
...door stop
thingiverse
door stop
thingiverse
free
stop by phatdood9
...stop by phatdood9
thingiverse
cable stop
thingiverse
free
Hodor Stop Hodoor Stop by FFranzmann
...
added a baseplate for more stability to the great hodor door stop from 3deas_3d_printinghttp://www.thingiverse.com/thing:1609595
thingiverse
free
"Stop" text door stop by Matthijz98
..."stop" text door stop by matthijz98
thingiverse
a cool door stopper
thingiverse
free
Window Stop by stratic
...window stop by stratic
thingiverse
window stop with notches to adjust the height of the stop.
thingiverse
free
Luxaflex stop
...s. the inner piece should go to the top, because it is longer, so every time the stop hits the assembly it should tighten itself.
thingiverse
free
Door stop by Hausner
...door stop by hausner
thingiverse
a door stop to stop the door from closing when there is a draft.
thingiverse
free
Work table stop or Workbench stop by paraiso8
...work table stop or workbench stop by paraiso8
thingiverse
it is a stopper for use on work benches.
Door
thingiverse
free
Door handle. Door with a mirror. by SergeyZA
...door handle. door with a mirror. by sergeyza
thingiverse
door handle
door with a mirror.
thingiverse
free
door contact for garage door by Marten
...door contact for garage door by marten
thingiverse
make the door iot .....
thingiverse
free
Door Handle Bumper / Door Stopper
...oor handle bumper / door stopper
thingiverse
door handle bumper / door stopper
print with tpu (ninjaflex, polyflex and the like)
thingiverse
free
Stop for the door
...stop for the door
thingiverse
made for the front door, this stout because the door is heavy
thingiverse
free
Door Handle for Door Handles
... them and you can twist and pull the door open. there is a little compartment for a cloth to use when opening door knobs as well.
thingiverse
free
Door by lastroman90
...door by lastroman90
thingiverse
this is a door
thingiverse
free
Door hanger (4cm door) by stfur
...ple door hanger for 4 cm door with 2 mm space.
123d file included - you can easy make some modifications to use on other doors :)
thingiverse
free
Door Stop for Pocket Door by mrigsby
...ssing a door stop for a pocket door. i tried to find one--but without luck.
i copied an existing door stop and it works great!
thingiverse
free
double door hook for 11mm door by CyberMarkus
...double door hook for 11mm door by cybermarkus
thingiverse
double door hook for 11mm door
thingiverse
free
Door Stop That's a Door! by deborahchase1
...1
thingiverse
trying to get that pesky door to behave? try this adorable #3d printable door stop from moxie3d (www.moxie3d.com).
Magnetic
thingiverse
free
Magnetic Memo Clip for 6x3mm Magnets
...magnetic memo clip for 6x3mm magnets
thingiverse
remixed with thinkercad to use it with 6x3mm neodym magnets
thingiverse
free
MAGNET by giacos
...magnet by giacos
thingiverse
magnet
thingiverse
free
Magnet tool for Magnetic X Carriage (5x3 magnets). by ndupont
...t the equipped end of the tool. the side that sticks to the embedded magnet has be to the side facing outside, at the ribbed end.
thingiverse
free
Mendako magnet (Octopus magnet) by usuneko
...ake devilfish) magnet.
inhabit the refrigerator in your home.
please prepare a magnet of diameter 5mm and height 3mm by yourself.
thingiverse
free
Magnetic Clip (Fridge Magnet) by Marchie
...ridge or office magnetic clip, that uses 4 5mm x2mm magnets glued into the four holes. just press the top of the clip to release!
thingiverse
free
Magnetic Emoji
...magnetic emoji
thingiverse
in love emoji for 2x5mm magnets
thingiverse
free
Magnetic Calipers
...l ruler. the holes in the calipers are for inserting magnets. not all magnets will fit, but i think i chose a fairly common size.
thingiverse
free
Logitech C270 magnetic holder (6.3x2.0 magnet)
...netic holder (6.3x2.0 magnet)
thingiverse
this is remix thing from logitech c270 magnetic holder.
requires three 6.3x2.0 magnet.
thingiverse
free
Magnetic Clasp
...part without spikes insert at layer 71 or 14.2mm height. you might need to increase scale by a 1 or 2% to get the magnets to fit.
thingiverse
free
Suction Magnet
...bathroom with a magnet, but you don't have any magnetic surface to stick it to. with this, you can...
Mounted
thingiverse
free
Pen Mount on BLTouch mount by jetspot
...pen mount on bltouch mount by jetspot
thingiverse
pen mount on bltouch mount
thingiverse
free
RAM Mount, Mount by seanmclean
...ram mount, mount by seanmclean
thingiverse
bridging plate to attach ram mount to yamaha 242, for chartplotter placement.
thingiverse
free
Mount for mount for Garmin GPS by GNOBLIN
...you can use this mount for prevent rotation simple mount around hendelbars.
d handelbar 31.8mm
use m3 screw and din 16903 plug.
thingiverse
free
Permanent mount for Modular Mounting System by WIR14
...permanent mount for modular mounting system by wir14
thingiverse
permanent mount for modular mounting system.
thingiverse
free
Gopro Mount and antenna mount by SuperYoyo
...gopro mount and antenna mount by superyoyo
thingiverse
cut the carbon platform to pass the gopro mount and enjoy !
thingiverse
free
Hexagon Mount for 50mm Mount (Sparkcube) by Draman
...for 50mm mount (sparkcube) by draman
thingiverse
hexagon mount remix from skimmys hotend-mount for sparkcube or other 50mm-mount
thingiverse
free
mount by gixster
...mount by gixster
thingiverse
custom mount
thingiverse
free
Mount by Matrxi999
...mount by matrxi999
thingiverse
shelf mount
thingiverse
free
Motor mount
...motor mount
thingiverse
motor mount
thingiverse
free
GoPro Mount
...gopro mount
thingiverse
gopro mount