Thingiverse
Flite Test Power Pod with motor mount by ThatSlacker
by Thingiverse
Last crawled date: 4 years, 11 months ago
This is a modification of my Super Bee power pod. For the Super Bee there's a downward angle required for the power pod. For other models such as the FT Arrow the power pod has a 90 degree angle instead. Since I'm currently building a model without the angle I figured I'd upload that.
If you don't want to use the Flite Test motor mount I've included the SVG file that I use for the motor mount on the front of the power pod. I cut that out of 1/8" plywood or MDF on a laser cutter and that's worked excellent.
I haven't ever tried 3D printing the motor mount but I imagine most people don't have access to a laser cutter. So I've also turned it into an STL file and put that here in case you feel like giving it a shot.
If you don't want to use the Flite Test motor mount I've included the SVG file that I use for the motor mount on the front of the power pod. I cut that out of 1/8" plywood or MDF on a laser cutter and that's worked excellent.
I haven't ever tried 3D printing the motor mount but I imagine most people don't have access to a laser cutter. So I've also turned it into an STL file and put that here in case you feel like giving it a shot.