Thingiverse
FlightAware Antenna Mount by more2me
by Thingiverse
Last crawled date: 3 years, 1 month ago
I needed to get my FlightAware antenna a little higher to clear my metal roof, so I designed this antenna mounting system. The antenna top fits the standard FlightAware 1090 Mhz ADS-B antenna. There are two different bottom mounts, depending on if you intend to mount to a horizontal surface (the straight bottom mount) or vertical (the 90-degree bottom mount). Four holes are provided to screw the bottom mount of your choice to the surface. The bottom and top mounts are designed to accept a standard 3/4" diameter PVC pipe between them so you can make the antenna mast as high as you wish.
I used the 90-degree mount to attach the antenna to my fascia board and it clears the roof edge nicely (see pics). I used a scrap piece of PVC, about 24" long, for added elevation and I'm now picking up many more planes which were previously blocked by the roof. When installed, the antenna cable is fully enclosed inside the two mounts and the PVC pipe for a clean look. I designed the parts using Tinkercad and intended them to look a little retro. Finally, I put a little caulk around the connections (not sure if it's really necessary given the tight fit) and spray painted everything with a grey paint to color match the parts and help protect the plastic from the Florida sun. Enjoy!
I used the 90-degree mount to attach the antenna to my fascia board and it clears the roof edge nicely (see pics). I used a scrap piece of PVC, about 24" long, for added elevation and I'm now picking up many more planes which were previously blocked by the roof. When installed, the antenna cable is fully enclosed inside the two mounts and the PVC pipe for a clean look. I designed the parts using Tinkercad and intended them to look a little retro. Finally, I put a little caulk around the connections (not sure if it's really necessary given the tight fit) and spray painted everything with a grey paint to color match the parts and help protect the plastic from the Florida sun. Enjoy!
Similar models
thingiverse
free
Peon230 Antenna Mount by rage1618
... hole in the middle was intended to allow an fpv antenna to come up through the support but i have not finished this feature yet.
grabcad
free
Request: 1" inch pvc pipe and 90 degree fitting
...nch pvc pipe and 90 degree fitting
grabcad
as requested here: https://grabcad.com/requests/1-inch-pvc-pipe-and-90-degree-fitting
thingiverse
free
Antenna Mount by albertk836
..." 3/4" pipe which is specified in the inventors instructions.
i made mine using pla and color matched it to the house.
thingiverse
free
QT Mount for HGLRC Wind 5 Lite by Kaymen219
...uot;t" then rotate the plastic of the qt 90 degrees.
i printed with 5% infill supports, but you might get away without them.
thingiverse
free
Simple Vertical PVC Filament Spool Holder by Zavek
... tops and 2 bottoms) in abs and it's working great. i covered it with a plastic storage box to keep my two cats away from it.
thingiverse
free
Electrohub Antenna Mount (90 Degree) by BankNYank
...ates or on the bottom plate and attaches with standard m3 screws. this part is available for purchase at http://rcpartshangar.com
thingiverse
free
1/2-in x 1/2-in 90-Degree Elbow PVC Fitting by Ntjp
...1/2-in x 1/2-in 90-degree elbow pvc fitting by ntjp
thingiverse
1/2" x 1/2" pvc 90 degree pipe connector.
thingiverse
free
3/4" PVC Spool Holder
...ommend printing with support "touching the build plate".
if you print this, please comment and let me know how it went.
thingiverse
free
FrSky V8FR-II (HV Version) receiver V antenna mount by Jigsawnz
... antenna pipes and can make sure they fit.
if you print this, please click the "i made one" on this thingiverse page.
thingiverse
free
Bracket for holding PL-259 and cable to a 3/4" PVC Schedule 40 Pipe by cdwiegand
...b transmissions to my pvc pipe in the backyard.
i chose to keep the support on the item, and it is holding great on the pvc pipe.
More2Me
thingiverse
free
Motif Dispenser Feet by more2me
... take on miele's motif maker: https://www.thingiverse.com/thing:4341101
who doesn't want foot prints on their cappuccino?
thingiverse
free
USB Plug by more2me
...ning it is very hard to get this plug back out of the usb port should you change your mind after inserting. use at your own risk!
thingiverse
free
FlightAware Box by more2me
...round the lid and the wide design of the venting holes on the box, i used supports while printing - your mileage may vary. enjoy!
Flightaware
thingiverse
free
Flightaware Flightfeeder Orange ADS-B receiver by morichi
...ild your own flightdeeder orange ads-b receiver for flightaware with a raspberry pi lcd module 3.2 inch and usb rtl-sdr receiver.
thingiverse
free
RaspberryPi FlightAware ProStick bracket by bzufhn4k
...i use a 180 degree usb adapter sourced from aliexpress (https://www.aliexpress.com/wholesale?searchtext=180+degree+usb+converter)
thingiverse
free
FlightAware Raspberry Pi case by kwh32901
...lable here: https://www.thingiverse.com/thing:2509055
learn more about flightaware here http://flightaware.com/adsb/piaware/build
thingiverse
free
FlightAware 1090MHz ADS-B Antenna Holder by tchemario
...es 4 m3x20 screws and 4 m3 nuts. scrape the back with coarse sandpaper, clean and install double-sided tape to stick to a window.
thingiverse
free
FlightAware feeder bracket - V2
...flight feeder on a support with just 2 screws.
simple removal.
support for the 1090 filter.
enjoy.
v2 added for the pencil holder
thingiverse
free
FlightAware ADS-B Pi Zero W Receiver Case by Rkimmell73
...azon.
4 - m2.5x5 socket head screws
4 - m3x10 socket head screws
links: flightaware - build your own ads-b ground station.
thingiverse
free
FlightAware Box by more2me
...round the lid and the wide design of the venting holes on the box, i used supports while printing - your mileage may vary. enjoy!
thingiverse
free
PI server rack flight aware and filter mount by nomanslands1
...rack flight aware and filter mount by nomanslands1 thingiverse flightaware server rack mount. fits a 1u pi rack...
thingiverse
free
Kia Stinger Pi4 SDR by Swap_File
...mount for a pi4 with pair of rtl-sdrs and flightaware filters. it fits next to the battery. uses a...
Antenna
archibase_planet
free
Antenna
...chibase planet
antenna aerial television antenna
antenna kathrein n090913 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...antenna
archibase planet
satellite antenna
antenna 1 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...antenna
archibase planet
equipment satellite antenna
antenna 2 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...ntenna
archibase planet
satellite antenna equipment dish aerial
antenna 3 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...antenna
archibase planet
satellite antenna dish dish aerial
antenna 4 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...e planet
antenna dish dish aerial
antenna c-band satellite s180-g n210612 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
car antenna
...car antenna
3dexport
car antenna, antenna, car gadgets
turbosquid
$1
antenna
...rbosquid
royalty free 3d model antenna for download as blend on turbosquid: 3d models for games, architecture, videos. (1655786)
3d_export
free
Station with antenna
...station with antenna
3dexport
station with antenna
turbosquid
$5
Antenna
...id
royalty free 3d model antenna for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1381532)
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)