Flexble floor

Last crawled date: 1 year, 8 months ago

Simple flexible floor.
That design consists of:
1)Starting bar 2pcs - which is permanently fixed to core
2)Connecting bars which are connected through springs 2pcs. On top of these bar is predicted anti-slip surface. Recommended is to walk putting feet on these bars.
3)Springs - I drawed springs as sketch. Spring should be more calculated. Maybe should be applied 2 layers of springs. Two layers of spring will allow to reduce diameter of spring- provide more flexibility of these connections. However that should be calculated. Based on calculation we can choose proper type&count of springs.

This solution allows the floor to adjust fully automatically. Both lengthening and shortening are possible. It is also possible to adjust the floor at different angles - it allows the hull to twist. If the hull is twisted, only a part of the springs in the floor will lengthen, while those with the shortest side will remain unchanged.