Thingiverse
Flat-pack corner table by jasonwebb
by Thingiverse
Last crawled date: 4 years, 8 months ago
This Thing contains the main Fusion 360 project file (Corner table.f3d) that I used to create a flat-pack corner table for my apartment.
The design has some parametric functionality that you can play with in Fusion 360 under Modify > Change Parameters. Most important of which is the Thickness_Global parameter that should be set to the real measured thickness of the stock you use.
All parts were routed out of 3/4" birch plywood using a low-end 4x4' CNC router at my local makerspace.
All CAM (toolpath) profiles are included in the project file and are optimized for my particular CNC machine. At a minimum you should verify or adjust the feeds, speeds, tool parameters, and stepdown to match the requirements of your machine.
Assembly animation: https://www.youtube.com/watch?v=-zyaghIKMfI
The design has some parametric functionality that you can play with in Fusion 360 under Modify > Change Parameters. Most important of which is the Thickness_Global parameter that should be set to the real measured thickness of the stock you use.
All parts were routed out of 3/4" birch plywood using a low-end 4x4' CNC router at my local makerspace.
All CAM (toolpath) profiles are included in the project file and are optimized for my particular CNC machine. At a minimum you should verify or adjust the feeds, speeds, tool parameters, and stepdown to match the requirements of your machine.
Assembly animation: https://www.youtube.com/watch?v=-zyaghIKMfI