Thingiverse
Flashforge Creator Pro / Dreamer Dual two nozzle blower for Raffle aluminium Y carriage by lakeitbenjamin
by Thingiverse
Last crawled date: 4 years, 7 months ago
After upgrading my Flashforge Creator Pro with an aluminium carriage from Raffle (www.raffle.ch) I noticed that I could not fit the original dual nozzle fan mount from DrLex any more, as the aluminium Y carriage needed a clearing of approx. 18.5mm
V4 - The air flow seems to be okay now, i.e. when printing at 230° and switching the part cooling fan on the nozzle temperature does not change compared to printing with part cooling fan switched off. Also added 0.5mm for the aluminium carriage spacer, as the V3 print broke apart when installing it in the printer.
V4 - The air flow seems to be okay now, i.e. when printing at 230° and switching the part cooling fan on the nozzle temperature does not change compared to printing with part cooling fan switched off. Also added 0.5mm for the aluminium carriage spacer, as the V3 print broke apart when installing it in the printer.