Thingiverse
Flash_quick_release_mount_stand by ChrisRD
by Thingiverse
Last crawled date: 4 years, 8 months ago
A combined flash quick-release mount and stand. Can attach flash to tripod or other items that use a Arca-Swiss type mount. Fits Canon/Nikon flash units, and should work with most flash types with the exception of some Sony/Minolta-specific units. Indents for easy use of clamp wheel, prints with minimal supports. A smaller QR plate-only version can be found here: www.thingiverse.com/thing:2846952
Must be printed hotshoe side down to the bed. I've included Gcode (for PLA) of the model pre-sliced with supports which are easy to remove. BE AWARE, if you use the gcode provided the printer will do a 120mm extruder purge/prime at the front of the bed before printing starts, if you use bed clips, move them away from the front edge.
Must be printed hotshoe side down to the bed. I've included Gcode (for PLA) of the model pre-sliced with supports which are easy to remove. BE AWARE, if you use the gcode provided the printer will do a 120mm extruder purge/prime at the front of the bed before printing starts, if you use bed clips, move them away from the front edge.