Thingiverse
Flansch für Filamentbox (IKEA) by Knaudler
by Thingiverse
Last crawled date: 2 years, 11 months ago
Eine Durchführungsflansch für eine Filamentbox
ich nutze einen ikea 365+ Vorratsbehälter 10.6L
hier muss nur ein Loch mit 14mm gebohrt werden
die Durchführung besteht aus 2 Teilen, mit Gewinde
in das innere Loch (9.7mm) kann man direkt eine
PC4-M10 pneumatische PTFE Verschraubung rein drehen
und dann mit Teflonschlauch direkt bis zum Drucker gehen
die Mutter ist im CAD Programm schon auf 102% hochscaliert, dass diese gut passt - je nach Druckereinstellung und Filament, muss man hier im Slicer event. noch 1-2% zugeben oder abziehen.
Fusion datei ist dabei
A feedthrough flange for a filament box
I use an ikea 365+ storage container 10.6L
here only a hole with 14mm must be drilled
the feedthrough consists of 2 parts, with thread
in the inner hole (9.7mm) you can directly put a
PC4-M10 pneumatic PTFE screw connection purely turn
and then go with Teflon hose directly to the printer
the nut is already scaled up to 102% in the CAD program, so that it fits well - depending on the printer settings and filament, you may have to add or subtract 1-2% in the slicer.
Fusion file is included
Translated with www.DeepL.com/Translator (free version)
ich nutze einen ikea 365+ Vorratsbehälter 10.6L
hier muss nur ein Loch mit 14mm gebohrt werden
die Durchführung besteht aus 2 Teilen, mit Gewinde
in das innere Loch (9.7mm) kann man direkt eine
PC4-M10 pneumatische PTFE Verschraubung rein drehen
und dann mit Teflonschlauch direkt bis zum Drucker gehen
die Mutter ist im CAD Programm schon auf 102% hochscaliert, dass diese gut passt - je nach Druckereinstellung und Filament, muss man hier im Slicer event. noch 1-2% zugeben oder abziehen.
Fusion datei ist dabei
A feedthrough flange for a filament box
I use an ikea 365+ storage container 10.6L
here only a hole with 14mm must be drilled
the feedthrough consists of 2 parts, with thread
in the inner hole (9.7mm) you can directly put a
PC4-M10 pneumatic PTFE screw connection purely turn
and then go with Teflon hose directly to the printer
the nut is already scaled up to 102% in the CAD program, so that it fits well - depending on the printer settings and filament, you may have to add or subtract 1-2% in the slicer.
Fusion file is included
Translated with www.DeepL.com/Translator (free version)
Similar models
thingiverse
free
PC4-M10 and PC4-M6 PTFE Bowden Coupling Nuts by jeremysears
...ars
thingiverse
pc4-m10 and pc4-m6 ptfe bowden coupler nuts. i used these for making a pass through for a filament storage box.
thingiverse
free
IKEA Samla - Filament Führung und Verschluss by Flowfuture
...nutzung des filaments mit der verschlusskappe verschlossen werden, somit ist es weiterhin vor feuchtigkeit und schmutz geschützt.
thingiverse
free
IKEA 365+ filament drybox by skateman
...m/thing:4682691
requirements:
ikea 365+ 10.6l
8mm aluminium rod
m3x10mm screws
pc4-01 pneumatic connectors
bowden tube
silica gel
thingiverse
free
geschlossener Deckel, Schlüssel mit Loch by Runkel
...hälter für geocaching (oder anderes) zu verwenden muss ein geschlossener deckel her und für den schlüssel ein loch zum aufhängen.
thingiverse
free
Bruder Förderband Bauteile für Elektro Antrieb mit Motor RB350 100 by zorro57
...werden kann.
das original grundgerüst muss an einigen stellenbearbeitet werden. siehe diverse bauberichte im modelltruck forum...
thingiverse
free
Filterabdeckung Rückspülfilter Drufi FR by Arminth
... wird mit sekundenkleber auf die abdeckung geklebt. die aufteilung verhindert, dass unnötig supportmaterial gedruckt werden muss.
thingiverse
free
Sagrotan-Nachfüller Stopfen by jojoslf
...n das loch wieder verschliessen. unbedingt prüfen ob bohrspäne im nachfüller sind, diese müssen vorm befüllen ausgespült werden !
thingiverse
free
Mendel 90 Dipond alternativ Spoolholder by fomape
...lterung her.
ausgelegt für die original kugellager mit m8x30schrauben.
die welle ist eine 10mm gewindestange und m10 schrauben.
thingiverse
free
Filamentlehre by RaVenXP1971
...rechnung : 100 / angezeigte millimeter * wert der in marlin steht ( m92 ) und diesen wert stattdessen eintragen und neu flashen
.
thingiverse
free
Filament Abroller für Trockenbox/Drybox by Lukas_Ndb
... into the 3d printing feedthrough.
i printed the rollers and the feedthroughs with 0.12mm quality and the base with 0.16 quality.
Knaudler
thingiverse
free
IKEA Hutten Inlay - Flaschenboden by Knaudler
...n by knaudler
thingiverse
inlay for ikea hutten for smaller bottles
einleger für ikea hutten flaschenständer für kleine flaschen
thingiverse
free
Headphone Holder for office desk (25mm) by Knaudler
...for office desk (25mm) by knaudler
thingiverse
headphone holder for office desk (25mm)
the opening has 25.4mm
step file attached
thingiverse
free
Bracket for CR-10 (with extra 7mm feet) by Knaudler
...(with extra 7mm feet) by knaudler
thingiverse
bracket for cr-10 with thishttps://www.thingiverse.com/thing:2893594
has 5mm holes
thingiverse
free
Holder for Ikea JANSJÖ by Knaudler
.../products/60385943/
https://youtu.be/u8qvcdt3e2a
please share, print and remix
incl. stl, step, f3d files
printing time: 40-55min
thingiverse
free
Hook for small Soap Bucket by Knaudler
...e small detergent containers
hung on the cr10 as a small trash can.
should fit on all the same aluminium profiles
f3d is included
thingiverse
free
feet for the CR-10 feet by Knaudler
...inrasten lassen
damit könnte man den cr-10 auch noch höher legen
aktuell 7mm
gedruckt mit extruder greentec (hatte ich grad drin)
thingiverse
free
Airbrush Verbinder 1/8 zoll - 1/8 zoll by Knaudler
... verbinder 1/8 zoll - 1/8 zoll
1/8 zoll bsp rohrgewinde
g 1/8-28
klasse b
rechts
um die einfachen airbrush schläuche zu verbinden
thingiverse
free
Cabinet Feet for Ikea Kallax by Knaudler
...eil der cr-10 mit dem weissen filament noch einen lampenhalter für fensterrahmen druckt...kommt auch noch
das step file ist dabei
thingiverse
free
mini Pylon for Dr!ft - 1:43 or 1/43 by Knaudler
...ter...
think it looks goodhttps://www.youtube.com/watch?v=izxj-tdym0q
here fusion shared link for the parthttps://a360.co/2qcaimp
thingiverse
free
Test only GT2 idler generated in fusion 360 by Knaudler
... coasting in cura nok
only way is to use nothing
please test with your printers
and yes elefant foot isnt nice - thats in working
Filamentbox
thingiverse
free
Spoolholder for Filamentbox
...ingiverse
just fix these holders on the walls of your filamentcontainer and add a 50mm pvc pipe between them to hold your spool.
thingiverse
free
Filamentbox Samla Holder DN40 DN50 by subcamera
...//www.thingiverse.com/thing:1752874
andhttps://www.thingiverse.com/thing:2469470
for use with 40mm or 50 mm ht-rohr vom baumarkt.
thingiverse
free
Filamentbox feeder into 2/4mm teflon tube by bubuu
... teflon tube by bubuu
thingiverse
little thingie to feed your filament trough the wall of a storage box into a 2/4mm teflon tube
thingiverse
free
Filamentbox, stackable and spiralized by lange23
...zle for more stability.
layer width 0,4 but best choice 0,6 or 0,8
layer height 0,3 up to 0,6
u need only 100-150 gramm filament
thingiverse
free
Kigima filamentbox sensor stand by Velo17
...he filament when it runs empty. of course you can combine this with a runout sensor as well (as do i).
the endswitch used is this
thingiverse
free
Filamenthalter by Tueftlergarage
...filamenthalter by tueftlergarage thingiverse vielleicht die beste filamentbox my social media profiles:...
thingiverse
free
IKEA Samla DryBox Filamentbox für 5 Rollen by Andy_Podo
... 0.15 25%
5x m10 mutter 0.15 25%
5x m10 unterlegscheibe 0.15 25%
5x m10 schraube 0.15 25%
thingiverse
free
Filament Box Badge
...boxes. just print them and stick them on the filamentbox ...
thingiverse
free
Ikea Samla 22L - Drybox - Filamentbox - Trockenbox by Da_Neo
...38-340mm)
20 x m8 - nut
16 x bearing 608zz:
4 x quick screw fitting - pc4-m6
100-150g silica gel
ptfe / polyurethan tube
sealing
Flansch
thingiverse
free
Flansch by Avtonomys
...flansch by avtonomys
thingiverse
flansch
thingiverse
free
Flansch Aussen 100x100 by DirksBastelbude
...flansch aussen 100x100 by dirksbastelbude
thingiverse
thingiverse
free
Flansch 25mm Extra für Duschstange by DirksBastelbude
...flansch 25mm extra für duschstange by dirksbastelbude
thingiverse
flansch 25mm rohr
thingiverse
free
suction hose, Absaugschlauch Adapter Flansch 125mm
...chlauch adapter flansch 125mm
thingiverse
suction hose, absaugschlauch adapter flansch 125mm/126mm for kitchen
supports needed !
thingiverse
free
Flange (Flansch) DN75 auf 92x92mm Lüfter by Primusveritas
...flange (flansch) dn75 auf 92x92mm lüfter by primusveritas
thingiverse
dn75 auf 92x92mm lüfter
thingiverse
free
Flange for 25 mm Rod / Flansch für 25 mm Rohr by GofX
...ew and nut to fix the flange.
flansch für 25mm rohr.
du brauchst nur eine m3x12 schraube und mutter um den flansch zu befestigen.
thingiverse
free
Aprilia RSV Mille Mirror Flange / Flansch Seitenspiegel Aprilia RSV Mille by Thalmano
...e holder flange to fix the side mirror at a aprilia rsv mille
flansch zum befestigen des seitenspiegels einer aprilia rsv mille
thingiverse
free
10mm Flansch / Cover by RapApp
...m rod. 2mm screws, 16mm long. no drill or threading.
you can find the file on www.onshape.com
try it out, it´s really for free!!!
thingiverse
free
Cyclone Zyklon by BoniAlex
...cyclone zyklon by bonialex thingiverse petg / pla -anschluss flansch abgewinkelt v3 -anschluss flansch v2 -gegendruckplatte v4 -zyklon deckel...
Für
turbosquid
free
Brot für die Welt
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Brillenhalter V3 für 1 Brille für Doppelklebeband by piepsvo
...brillenhalter v3 für 1 brille für doppelklebeband by piepsvo
thingiverse
brillenhalter v3 für 1 brille für doppelklebeband
thingiverse
free
Halterung für 3DConnexion SpaceNavigator für Notebooks by herbert_b1
...ung für 3dconnexion spacenavigator für notebooks by herbert_b1
thingiverse
support for 3dconnexion spacenavigator for notebooks
thingiverse
free
Deckplatte für Playmobil Möbel (Schrank für Herd etc) by charly52
...kplatte für playmobil möbel (schrank für herd etc) by charly52
thingiverse
deckplatte für playmobil möbel (schrank für herd etc)
thingiverse
free
Haken für Kederschiene 7mm für Dtbd-Dachzelt by Paku_ia
...dtbd-dachzelt by paku_ia
thingiverse
haken für ddbd-dachzelt. zur montage wir die haken einfach in die kederleiste eingeschoben.
thingiverse
free
Öse für Kederschiene 7mm für Dtbd-Dachzelt by Paku_ia
...ia
thingiverse
besfestigungsöse für ddbd-dachzelt. zur montage wir die befestigungsöse einefach in die kederleiste eingeschoben.
thingiverse
free
Case für REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER by Rolfiklein
..._full_graphic_smart_controller by rolfiklein
thingiverse
gehäuse für das weit verbreitete grafik display mit schalter für licht.
thingiverse
free
Haken für Dusche by Pascal_1966
...haken für dusche by pascal_1966
thingiverse
haken für dusche
thingiverse
free
Printhalterung für Schaltschrank by nikibalboa
...printhalterung für schaltschrank by nikibalboa
thingiverse
platinenaufnahme für schienenmontage
thingiverse
free
Adapter für Schläuche by jensatweb
...adapter für schläuche by jensatweb
thingiverse
adapter für poolschläuche
Ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , стеллаж
ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
кухня ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
осторожно, тяжелая модель
ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
5 зеркал от ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , бойа
ikea светильник потолочный
3ddd
$1
IKEA
...ikea
3ddd
ikea , барный
bar stool ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , зубная щетка , косметика
ikea
3ddd
free
IKEA
...ikea
3ddd
ikea , трюмо
дамский столик ikea.
3ddd
$1
IKEA
...3ddd
ps , декоративный набор , ikea
ikea decor
3ddd
$1
Ikea
...ikea
3ddd
ikea , lagra
модель лампы от ikea