Thingiverse
Flamewheel Quadcopter (slightly bigger version) by johnroy22222
by Thingiverse
Last crawled date: 3 years, 4 months ago
The original design is here :
https://www.thingiverse.com/thing:2221073 from https://www.thingiverse.com/syahriansyah
I didn't quite understood why 2 plates were necessary, so i made a version with only one plate, i ve added some holes for the 30.5 x 30.5 mm flight controller, and made some quick feet. Big enough to accomodate for the lipo battery below the frame.
I ve made the arms slightly longer too.
I wanted to find an easy way to balance the drone, this is why i made a hole in the center, but it's obviously a bad idea, as the battery is blocking the way (maybe this is why there's 2 plates in the original design :-) )
https://www.thingiverse.com/thing:2221073 from https://www.thingiverse.com/syahriansyah
I didn't quite understood why 2 plates were necessary, so i made a version with only one plate, i ve added some holes for the 30.5 x 30.5 mm flight controller, and made some quick feet. Big enough to accomodate for the lipo battery below the frame.
I ve made the arms slightly longer too.
I wanted to find an easy way to balance the drone, this is why i made a hole in the center, but it's obviously a bad idea, as the battery is blocking the way (maybe this is why there's 2 plates in the original design :-) )
Similar models
thingiverse
free
FrSky Taranis battery cover (original version) by totof1965
...if it's ok
deep version : http://www.thingiverse.com/thing:522017
1 cm deep version : http://www.thingiverse.com/thing:252542
thingiverse
free
Clips and Spacer for Ninja Printer Plate VERSION 2 (MakerBot Replicator 2) by TobyGadd
...xis switch, making room for the extra thickness of the ninja plate.
the link for the plate: http://printinz.com/printer-plates/
thingiverse
free
CR-10 Filament Spool Holder by Nickys93
...ack and forth.
update: i've added 1mm to the leght of the front hole of the bolt because it was slightly rubbing on the back.
thingiverse
free
Nerf Stryfe 18650 Battery Holder V2 by ssayer
... turned it 180°, and fused it to the first. then i fused the holders on to the battery cover that i used in the previous version.
thingiverse
free
AA Battery Holder Holder by Takacon
...r small zip ties as a way to secure it in place. the model is printed with no supports and works fine. i made this in fusion 360.
thingiverse
free
Ti-58, Ti-59, Ti-59c battery backplate by bryboy747
... calculator, i designed a hole in the back so a larger battery can fit through, but i've also uploaded a non-modified version
thingiverse
free
Wearable Pi Zero case for 2000mAh battery by ex-nerd
...file i used to do the way-too-complicated stretching of the original stl, in case someone needs to fit a different sized battery.
grabcad
free
quadcopter 250mm
...quadcopter 250mm
grabcad
i've made some upgrade :)
in this version i use another battery
thingiverse
free
XT90 cap by Vortecks
...is original design http://www.thingiverse.com/thing:1428276
my youtube channel is here: https://www.youtube.com/user/vortecks2000
thingiverse
free
E3D fan with integrated layer fan - extruder fan facing right by bdsnk
... version 2 has a 23mm internal diameter. the 2 versions were made due to possible issues with material retraction after printing.
Johnroy22222
thingiverse
free
iphone7 phone stand by johnroy22222
... in line with the integrated camera for application such as whatsapp, your face will show not centered at all)
mesh is watertight
thingiverse
free
shower holder v3 - new type by johnroy22222
...er only 2 months (see photo), so, i made a less sexy one. hopefully it ll last longer !
pla, printed with 15% infill and support.
thingiverse
free
feet for 400mm DJI Flamewheel Quadcopter by johnroy22222
...quad, and didn't like the idea of doing "belly battery landing" ! :-)
it's not the design of the year though !
thingiverse
free
showerhead holder v2 by johnroy22222
...r the screws, tell me, i ll be happy to provide it.
and yes, the color i chose is really bad taste...it s also cheaper pla... :-)
thingiverse
free
iphone5s phone stand angled for video watching v2 by johnroy22222
... face not being centered because of the angle)
it is watertight.
it needs support (i provide the setting i used for easy removal)
thingiverse
free
shutter lock mechanism by johnroy22222
....
for aesthetic and strength, increase the infill...with the day light, the infill shows like it's being x-rayed !! (>20%)
thingiverse
free
iphone stand - angled for video watching by johnroy22222
...you use mainly the camera of your iphone for video chatting. (this one for instance : https://www.thingiverse.com/thing:4485514 )
thingiverse
free
ipad stand by johnroy22222
... room, fan set to 50%).
it took less than 5 hours (i increased the speed to 160% of the initial cura settings), with 66 g of pla.
thingiverse
free
handle strip for neff extractor hood by johnroy22222
...de with caged nut.
the equivalent mechanical neff part cost 20$.
cura says 13hours 17 minutes 226 g 75.74 m 4 dollars of plastic.
Flamewheel
thingiverse
free
Dji Flamewheel F550 Arm by dirkdirk
...dji flamewheel f550 arm by dirkdirk
thingiverse
a replacement arm for the dji flamewheel f550.
thingiverse
free
Spacer for DJI Flamewheel by Stayning
...r for dji flamewheel by stayning
thingiverse
usa a 3mm bolt, nut and 2 spacers *4, to mount something under your dji flamewheel.
thingiverse
free
FlameWheel F450 Extension Legs by chrismalyon
...xtension legs by chrismalyon
thingiverse
flamewheel f450 extension legs to give the height required for a brushless gimbal mount
thingiverse
free
Long legs for Flamewheel Quadcopter by JarneMeylemans007
... by jarnemeylemans007
thingiverse
longer legs for the 400mm dji flamewheel quadcopter.
3 times longer then the original. (110mm)
thingiverse
free
F450 Flamewheel Long Leg by ljbotero
...o
thingiverse
this leg has the advantage that it fits f450 legs with no holes. this works for eithr type of flamewheel drone leg
thingiverse
free
dji-flamewheel-landing-gear by damico
...damico
thingiverse
a landing gear for drone frames like dji flamewheel f450 or f550 - https://github.com/scicrop/flameweel-parts
thingiverse
free
M8N Holder for F450 Flamewheel by Xarrax
...450 flamewheel by xarrax
thingiverse
a simple m8n gps holder for dji f450 flamewheel.
i am not sure if it will fit non dji f450.
thingiverse
free
Railmount for DJI F550 Flamewheel by Foliengriller
...iverse
railmount for dji f550 flamewheel.
holds two 10mm diameter carbon tubes with 58mm distance -
e.g. for feiyu-tech gimbals.
thingiverse
free
DJI Flamewheel Leg by maek
... of in like the original design and has been extended this is so the gopro can mount properly at the bottom with enough clearance
thingiverse
free
Mount for DJI Naza Lite Flamewheel by danielc
...ewheel by danielc
thingiverse
plate for mounting a naza lite on the mini flamewheel quad: http://www.thingiverse.com/thing:34552
Quadcopter
3d_export
$5
quadcopter
...quadcopter
3dexport
futuristic quadcopter design.<br>original design davidflo 77
turbosquid
$19
quadcopter
...lty free 3d model quadcopter for download as max, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1591426)
turbosquid
$25
QuadCopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Quadcopter 3D Model
...quadcopter 3d model
3dexport
quadcopter studio shaders
quadcopter 3d model vortex333 93968 3dexport
3d_export
$5
Quadcopter 3D Model
...quadcopter 3d model
3dexport
quadcopter aircraft helicopter
quadcopter 3d model greatghost 94019 3dexport
3d_export
$18
passenger quadcopter
... a multicopter is an aircraft built according to a helicopter scheme, with three or more rotors. previews rendered with redshift.
turbosquid
$159
Quadcopter Animated.
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Drone Quadcopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Drone Quadcopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$29
Quadcopter
...
questions about the continuation of the collection or the model can be asked here:<br>https://www.artstation.com/evgen_beg
Bigger
turbosquid
$50
Marvelous Designer and 3DS Max: Curtains02 Bigger
...s designer and 3ds max: curtains02_bigger for download as max on turbosquid: 3d models for games, architecture, videos. (1477775)
turbosquid
$50
Marvelous Designer and 3DS Max: Curtains01 Bigger
...s designer and 3ds max: curtains01_bigger for download as max on turbosquid: 3d models for games, architecture, videos. (1477765)
turbosquid
$50
Marvelous Designer and 3DS Max: Curtains01 Variation Bigger
... and 3ds max: curtains01_variation_bigger for download as max on turbosquid: 3d models for games, architecture, videos. (1477772)
3d_ocean
$8
Scoop Highchair
...comfy high chair for little ones, stylish stool for bigger ones! as used in yo!sushi...
3d_ocean
$1
Paper Strips Seamless Background
...file • tiling texture click here if you need bigger file at...
3ddd
$1
De Sede 88 daybed and table
...are unwrapped. these models are a part of a bigger set of modules to be...
3ddd
$1
De Sede 88 pouf and base module
...are unwrapped. these models are a part of a bigger set of modules to be...
3d_ocean
$3
Engagement Rings
...shiny silver wedding a pair of engagement rings. a bigger one without a diamond and a smaller ring with...
3d_export
$5
twisted lines ring
...thin one, but you can re scale it to bigger one easily. there are many format in the zip...
3d_ocean
$15
Building Blocks
...quality, low polygonal models, easy to tile into a bigger structure. - poly count: 2628 - formats: max /obj...
Slightly
turbosquid
free
Fork slightly used
...bosquid
free 3d model fork slightly used for download as fbx on turbosquid: 3d models for games, architecture, videos. (1230401)
turbosquid
$19
Slightly Worn Leather Chair - Game/VR Ready
...hair - game/vr ready for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1275581)
3d_export
$5
teapot
...teapot 3dexport an ordinary kettle, slightly ...
3d_export
$5
depth chargemk9
...depth chargemk9 3dexport actual size may vary slightly ...
3d_export
$8
skippy cyberpunk2077
...hjke-11 yukimura “skippy”: a smartwith a unique voice-user interface. slightly ...
3d_export
$15
world war carrier
...model was made from akagi ship. however, it is slightly different from the...
3d_ocean
$3
Grass Hand Painted Texture Tile
...floor tile, one of healthy green grass, one of slightly subdued grass and the last is a slightly darker...
3d_export
$5
orthodontic aligners
...teeth. wearing them puts gentle pressure on the teeth, ever-so-slightly repositioning...
3d_ocean
$19
Cartoony Pirate Model
...caricature cartoony fantasy funny pirate pirate hat pirates a slightly caricatured, cartoonish pirate...
3d_ocean
$3
Striped Jersey 5
...seamless tilable jersey texture with bump and normal map. slightly ...
Version
3ddd
$1
Diamond version
...nd , version , ванна
visionnaire - diamond bath
turbosquid
$50
LibraryMini Version
...free 3d model librarymini version for download as max and jpg on turbosquid: 3d models for games, architecture, videos. (1617724)
design_connected
$34
Barocco Version 01
...barocco version 01
designconnected
zanotta barocco version 01 computer generated 3d model. designed by progetti, emaf.
design_connected
$27
Barocco Version 02
...barocco version 02
designconnected
zanotta barocco version 02 computer generated 3d model. designed by progetti, emaf.
turbosquid
free
![Door [2 versions]](/t/13243146.jpg)
Door [2 versions]
...rbosquid
free 3d model door [2 versions] for download as fbx on turbosquid: 3d models for games, architecture, videos. (1223985)
turbosquid
$2
seat version 0.1
...
royalty free 3d model seat version 0.1 for download as blend on turbosquid: 3d models for games, architecture, videos. (1432653)
3d_export
$10
magnolia grandiflora mature version
...magnolia grandiflora mature version
3dexport
magnolia grandiflora mature version
3d_export
$8
room assets and voxel version
...room assets and voxel version
3dexport
room assets and voxel version
turbosquid
$12
Chip Version 03
...lty free 3d model chip version 03 for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1241145)
turbosquid
$35
Zil Civilian version
... model zil civilian version for download as cgf, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1639420)