Thingiverse
Five33 Switchback HD Pod by AqroxFPV
by Thingiverse
Last crawled date: 3 years, 3 months ago
I've designed this pod to fit a Caddx Vista on the Five33 Switchback frame.
I've used 30mm stand offs in the back to make it all fit with a regular 20x20 stack.
You can either screw the Vista to the top plate or put it on top of your stack.
Screwing it onto the top plate gave me a few millimeters extra space so I went that way.
If you screw it to the top plate you can press m2 nuts into the top of the top plate or secure the VIsta with nuts on the bottom of the Vista and the screws go down from the top plate.
I prefer the last way so the bolt doesn't fall down into the stack if it gets loose due vibrations.
I had that happen which cost me the stack you see in the photo's.
The antenne holder in the back is designed to fit a BetaFPV micro antenna. Other antenna's probably won't fit. If there's a need for it I can remove it from the design so you can fit your own antenna's but I really like this one and gives me plenty of range on 25mW.
The pod has a fixed 45 degree angle with plenty of protection for the DJI cam.
Check out this video for some flight footage:https://youtu.be/e9bYZ-Wrias
5 inch race setup:
FlyFive33 Switchback: https://flyfive33.eu/product/switchback/
T-Motor F7 Mini stack: https://bit.ly/3nwT3VR
Flywoo NIN 2207.5 1860kv: http://bit.ly/37LFuex
Caddx Vista: https://bit.ly/3mHMEav
BetaFPV Air 5.8ghz: https://betafpv.com/products/air-5-8ghz-fpv-antenna
Gemfan 51466: https://bit.ly/2Xs3EH1
TBS Crossfire Nano: https://bit.ly/2VxsdkJ
5 inch setup (6s):
ImpulseRC Apex: https://bit.ly/34UI173
T-Motor F40 Pro IV 1950kv: https://bit.ly/3mOdugW
Diatone Mamba F722s stack: http://bit.ly/35PUNBl
Caddx Vista: https://bit.ly/3mHMEav
Foxeer Lollipop LHCP: https://bit.ly/381Fhqg
Gemfan 51433: https://bit.ly/3dEnWDa
TBS Crossfire Nano: https://bit.ly/2VxsdkJ
Digital Toothpick:
Twig XL 3": https://bit.ly/3jR2LAG
Amax 1303 5000kv: https://bit.ly/383qlI8
NamelessRC AIO412T : https://bit.ly/3oSJkei
Caddx Vista: https://bit.ly/3mHMEav
Gemfan 3016: https://bit.ly/3mIceMs
TBS Crossfire Nano: https://bit.ly/2VrGoHL
Cinewhoop:
Shendrones Squirt v2 frame
Diatone MAMBA F405 Mini MK2 stack: http://bit.ly/359QC2N
BorhterHhobby T1 1407 2800kv: https://bit.ly/326sor2
Caddx Vista: https://bit.ly/3mHMEav
HQ Prop Duct 3 Tri-Blade 3": http://bit.ly/2OighQa
TBS Crossfire Nano: https://bit.ly/2VxsdkJ
On the ground:
Betaflight Hive Backpack
TBS Crossfire Micro TX: https://bit.ly/2VrGoHL
TBS Tango 2: https://droneshop.nl/tbs-tango-2
DJI FPV: https://bit.ly/2PEKPwi
I've used 30mm stand offs in the back to make it all fit with a regular 20x20 stack.
You can either screw the Vista to the top plate or put it on top of your stack.
Screwing it onto the top plate gave me a few millimeters extra space so I went that way.
If you screw it to the top plate you can press m2 nuts into the top of the top plate or secure the VIsta with nuts on the bottom of the Vista and the screws go down from the top plate.
I prefer the last way so the bolt doesn't fall down into the stack if it gets loose due vibrations.
I had that happen which cost me the stack you see in the photo's.
The antenne holder in the back is designed to fit a BetaFPV micro antenna. Other antenna's probably won't fit. If there's a need for it I can remove it from the design so you can fit your own antenna's but I really like this one and gives me plenty of range on 25mW.
The pod has a fixed 45 degree angle with plenty of protection for the DJI cam.
Check out this video for some flight footage:https://youtu.be/e9bYZ-Wrias
5 inch race setup:
FlyFive33 Switchback: https://flyfive33.eu/product/switchback/
T-Motor F7 Mini stack: https://bit.ly/3nwT3VR
Flywoo NIN 2207.5 1860kv: http://bit.ly/37LFuex
Caddx Vista: https://bit.ly/3mHMEav
BetaFPV Air 5.8ghz: https://betafpv.com/products/air-5-8ghz-fpv-antenna
Gemfan 51466: https://bit.ly/2Xs3EH1
TBS Crossfire Nano: https://bit.ly/2VxsdkJ
5 inch setup (6s):
ImpulseRC Apex: https://bit.ly/34UI173
T-Motor F40 Pro IV 1950kv: https://bit.ly/3mOdugW
Diatone Mamba F722s stack: http://bit.ly/35PUNBl
Caddx Vista: https://bit.ly/3mHMEav
Foxeer Lollipop LHCP: https://bit.ly/381Fhqg
Gemfan 51433: https://bit.ly/3dEnWDa
TBS Crossfire Nano: https://bit.ly/2VxsdkJ
Digital Toothpick:
Twig XL 3": https://bit.ly/3jR2LAG
Amax 1303 5000kv: https://bit.ly/383qlI8
NamelessRC AIO412T : https://bit.ly/3oSJkei
Caddx Vista: https://bit.ly/3mHMEav
Gemfan 3016: https://bit.ly/3mIceMs
TBS Crossfire Nano: https://bit.ly/2VrGoHL
Cinewhoop:
Shendrones Squirt v2 frame
Diatone MAMBA F405 Mini MK2 stack: http://bit.ly/359QC2N
BorhterHhobby T1 1407 2800kv: https://bit.ly/326sor2
Caddx Vista: https://bit.ly/3mHMEav
HQ Prop Duct 3 Tri-Blade 3": http://bit.ly/2OighQa
TBS Crossfire Nano: https://bit.ly/2VxsdkJ
On the ground:
Betaflight Hive Backpack
TBS Crossfire Micro TX: https://bit.ly/2VrGoHL
TBS Tango 2: https://droneshop.nl/tbs-tango-2
DJI FPV: https://bit.ly/2PEKPwi
Similar models
thingiverse
free
Beta95x Betafpv Crossfire / Vista Antennas mount by mrgilchen
...ount by mrgilchen
thingiverse
this is the mount for the crossfire immortal t antenna and the caddx vista antenna.
tpu
infill=80%
thingiverse
free
Shendrones Squirt - Caddx VIsta, Immortal T Crossfire and GPS mount backpack by DjBac
...nt backpack by djbac
thingiverse
a remix for a mount/backpack to fit a caddx vista antenna, an immortat-t antenna and a tbs gps.
thingiverse
free
Armattan Marmotte (DJI Edition) Vista and TBS Crossfire Nano Mount by dr_drone
... the dji edition. tbs crossfire sits under the caddx vista unit.
requires:
16-18mm m2 screws x4 (18mm preferable)
m3 8mm screws.
thingiverse
free
MoonGoat Rear Antenna Mount with TBS Crossfire by SPAT_FPV
...at will hold a caddx vista antenna and tbs crossfire immortal t antenna. i did 100% infill with sainsmart tpu and turns out nice.
thingiverse
free
Armattan Marmotte Badger Caddx Vista and TBS Immortal T Antenna Mount by dr_drone
...heat shrink it after to keep it in place.
2) vista antenna stem needs to be removed carefully with a knife to allow installation.
thingiverse
free
Five33 Switchback HD by FlyFive33
...five33 switchback hd by flyfive33
thingiverse
switchback hd prints
thingiverse
free
Turtle fin with XF-Race antenna mount for Switchback by yorb
... (tpu parts for the five33 switchback) with a widened and hollowed center section to accommodate a tbs crossfire xf-race antenna.
thingiverse
free
TBS Source 2 various parts by rcflyers
...llow room for a vifly lost model alarm in front of it.
all items printed in pla apart from the caddx antenna holder which is tpu.
thingiverse
free
Diatone Roma F4 TBS+GPS+Vista antenna mount by jr_zzzz
...antennas. make a small cut to one of the bottom holes to insert tbs crossfire antenna (like how there is in the original holder).
thingiverse
free
Betafpv-Beta95x v2 Antennas Mount by mrgilchen
...afpv-beta95x v2 antennas mount by mrgilchen
thingiverse
this is a mount for the tbs crossfire and vista antennas.
infil 80%
tpu.
Aqroxfpv
thingiverse
free
X5R VTX antenna mount by AqroxFPV
... like this thing please consider clicking one of the affliate links below to support me.
realacc x5r frame: http://bit.ly/2tmzatw
thingiverse
free
X5R micro to full camera adapter by AqroxFPV
...e of the affliate links below to support me.
realacc x5r frame: http://bit.ly/2ltgjyy
runcam swift micro 3: http://bit.ly/2ybiqwt
thingiverse
free
A-Max 98H VTX holder by AqroxFPV
...//bit.ly/2kfjnwm
runcam micro swift 2: http://bit.ly/2kcrhjt
eachine vtx03: http://bit.ly/2lvgiuc
lizard95: http://bit.ly/2mi3f2f
thingiverse
free
ESC protector (fit's Tekko32 35A ESC) by AqroxFPV
.... although they do feel a lot stronger with petg. this could also be because i use a 0.6 nozzle with 0.4 layer height these days.
Five33
thingiverse
free
Five33 Switchback improved pieces by felixthecatFPV
...five33 switchback improved pieces by felixthecatfpv
thingiverse
five33 switchback improved 3d prints
thingiverse
free
Five33 TinyTrainer Arm Protection by l_levitate_l
...five33 tinytrainer arm protection by l_levitate_l
thingiverse
just a basic arm protection for the tinytrainer from five33.
thingiverse
free
Five33 Switchback Actuna Gem antenna mount
...five33 switchback actuna gem antenna mount
thingiverse
actuna gem antenna holder for five33 switchback frame
thingiverse
free
Five33 Switchback HD by FlyFive33
...five33 switchback hd by flyfive33
thingiverse
switchback hd prints
thingiverse
free
Five33 Switchback HD by nicktrott83
...r the five33 switchback hd conversation.
you need the switchback hd kit (bigger hd top plate)!
uses the standard 25 mm standoffs.
thingiverse
free
Five33 Switchback Skelefin by burfus
.... designed for the five33 swtichback classic, but can work on any frame with 20mm front standoff spacing. stronger than it looks!
thingiverse
free
Foxeer lollipop mount for Five33 Switchback Pro by Owl77
... switchback pro by owl77
thingiverse
foxeer lollipop mount for five33 switchback and switchback pro. regular lollipop not micro.
thingiverse
free
Foxeer lollipop micro Seatbelt for Five33 Switchback Pro by AKdrones
...llipop micro seatbelt for five33 switchback pro by akdrones
thingiverse
foxeer micro lollipop seatbelt for five33 switchback pro
thingiverse
free
Five33 Switchback TPU parts
...five33 switchback tpu parts
thingiverse
all parts for the flyfive33 switchback. more parts will be added upon request.
thingiverse
free
Five33 Tiny Trainer Fixed Camera Mount by joshhowell
...hingiverse
a fixed camera mount for the five33 tiny trainer.
the camera mounts upside down so you will need to flip the image.
Switchback
turbosquid
$109
Harley-Davidson FLD Dyna Switchback 2015
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Five33 Switchback HD by FlyFive33
...five33 switchback hd by flyfive33
thingiverse
switchback hd prints
thingiverse
free
Marble Run Switchback by muilenta
...marble run switchback by muilenta
thingiverse
marble run switchback
thingiverse
free
Switchback Turtle Fin by FireSerpent
...d off of the og switchback pro fin but with a print direction of the back to the print plate making it less likely to tear apart.
thingiverse
free
Five33 Switchback TPU parts
...five33 switchback tpu parts
thingiverse
all parts for the flyfive33 switchback. more parts will be added upon request.
thingiverse
free
Five33 Switchback HD by nicktrott83
...r the five33 switchback hd conversation.
you need the switchback hd kit (bigger hd top plate)!
uses the standard 25 mm standoffs.
thingiverse
free
Five33 Switchback improved pieces by felixthecatFPV
...five33 switchback improved pieces by felixthecatfpv
thingiverse
five33 switchback improved 3d prints
thingiverse
free
Foxeer lollipop mount for Five33 Switchback Pro by Owl77
... switchback pro by owl77
thingiverse
foxeer lollipop mount for five33 switchback and switchback pro. regular lollipop not micro.
thingiverse
free
Five33 Switchback Actuna Gem antenna mount
...five33 switchback actuna gem antenna mount
thingiverse
actuna gem antenna holder for five33 switchback frame
thingiverse
free
Switchback Antenna Mount by nicktrott83
...switchback antenna mount by nicktrott83
thingiverse
antenna mount for lollipop antenna
Pod
design_connected
$13
Pod
...pod
designconnected
niche modern pod computer generated 3d model. designed by pyles, jeremy.
3d_export
$5
engine pod
...engine pod
3dexport
engine pod
turbosquid
$80
POD
...pod
turbosquid
royalty free 3d model pod for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1234976)
3ddd
$1
Pod 325
...pod 325
3ddd
пуф
pod 325
turbosquid
$4
PODS
...oyalty free 3d model pods for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1563118)
3d_export
$5
coworking pods
...coworking pods
3dexport
private pods for workspaces, offices
3ddd
$1
Pod Meeting
...pod meeting
3ddd
pod meeting , martela
146cm x 205cm
design_connected
$16
Pod 325
...pod 325
designconnected
department pod 325 computer generated 3d model.
3d_ocean
$5
Ariel Power Pod
...model ariel power pod ariel power pod, modeled in cinema 4d r14 and all materials are included. if you like it, please rate this
3ddd
$1
POD 325
...pod 325
3ddd
кресло мешок
кресло мешок pod 325, room 21 85x50x100cm.
Hd
3d_export
$7
Bread hd
...bread hd
3dexport
hd for you
3ddd
$1
Cintiq24 HD
...cintiq24 hd
3ddd
cintiq24 hd
design_connected
$16
Nova HD
...nova hd
designconnected
instashade nova hd computer generated 3d model.
turbosquid
$20
Neptune HD (Suport Full HD Render)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
HD skull
...l
turbosquid
royalty free 3d model hd skull for download as on turbosquid: 3d models for games, architecture, videos. (1207058)
3d_ocean
$2
Grass HD
... the time! grass hd with 4k textures want to make grass field? of course you can! tileable support! have any problem? contact me!
3d_export
$13
angel hd
...angel hd
3dexport
beautifuul!
turbosquid
$40
EAGLE HD
...urbosquid
royalty free 3d model eagle hd for download as obj on turbosquid: 3d models for games, architecture, videos. (1172720)
turbosquid
$30
HD Spaceship
...squid
royalty free 3d model hd spaceship for download as max on turbosquid: 3d models for games, architecture, videos. (1367374)
turbosquid
$2
HD Tree
...id
royalty free 3d model hd tree for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1670118)