Thingiverse
Fish Ladder Mk.3 (Kailh Choc/MX Switches) Keyboard by ak666666
by Thingiverse
Last crawled date: 4 years ago
A remix of my Fish Ladder Mk.3 keyboard (https://www.thingiverse.com/thing:4828205) to use Kailh Choc switches.
I swapped the springs to 12gf and removed the stabilizers from them.
The switches are holding in holes by friction only.
Keyboard is hand-wired, a ProMicro Atmel32U4 in each half, a USB A to attach it to the computer and 3.5mm audio jack to connect the halves. Plus a reset button, a mouse switch, or any other button that would fit into that 6 mm hole.
Cherry MX switches also may fit, but they require some hot glue to hold the switches in place.
Model is here: https://a360.co/2Q1H9J2
The bottom part just snaps in.
For the feet I used 6mm rubber bumpers.
I swapped the springs to 12gf and removed the stabilizers from them.
The switches are holding in holes by friction only.
Keyboard is hand-wired, a ProMicro Atmel32U4 in each half, a USB A to attach it to the computer and 3.5mm audio jack to connect the halves. Plus a reset button, a mouse switch, or any other button that would fit into that 6 mm hole.
Cherry MX switches also may fit, but they require some hot glue to hold the switches in place.
Model is here: https://a360.co/2Q1H9J2
The bottom part just snaps in.
For the feet I used 6mm rubber bumpers.