Thingiverse
FireFlo v2 VTX backpack codename 'bumblebee' by Jesse_Blue
by Thingiverse
Last crawled date: 4 years, 5 months ago
A "little" backpack for the FireFlo-frame when you are using a DIY vtx combination with a tx module.
Just place the fc on the lower section ( with 2 poles ) and just punch it right on to the frame, press-fit ;-) .
Attach the vtx-mount ( with 4 poles ) on the lower section and mount your vtx on it by using double sided tape.
After printing it you should clean out the holes with a 3mm drill bit.
Just place the fc on the lower section ( with 2 poles ) and just punch it right on to the frame, press-fit ;-) .
Attach the vtx-mount ( with 4 poles ) on the lower section and mount your vtx on it by using double sided tape.
After printing it you should clean out the holes with a 3mm drill bit.