Thingiverse
FireFlo v2 by SirQuentin
by Thingiverse
Last crawled date: 2 years, 12 months ago
This is a remix of the FireFly Version and an alternative frame for the Blade NanoQX (also FPV).
It fits the original NQX Cam or the additional Spektrum Micro Cam.
Its available for 6mm, 7mm and 8.5mm Motors.
You can bend the camera holder if you heat it up a bit, but be careful.
Frame size is at ~110 mm diagonal (m2m) and about 9 x 9 cm in length and width.
Frame weighs between 6g and 7g.
Example Setups that will fit and are tested:
Motormounts:
Motor holders for this frame can be found in the "CopterCustoms"-Group. (http://www.thingiverse.com/thing:1133331)
Motors 6mm:
micro-motor-warehouse.com: CL-0615-11, CL-0615-14
Standard NanoQx
Motors 7mm:
micro-motor-warehouse.com: CL-0720-12, CL-0720-14
Standard Hubsan x4 H107L
Motors 8.5mm:
micro-motor-warehouse.com: CL-0820-15, CL-0820-17 Dark Edition
Standard Hubsan x4 H107D, H107C
Flight Control:
(for a proper fit, you should remove the motor plugs and solder the motors directly to the board):
NanoQx Board (MOSFETs need to be replaced when using 8.5mm motors)
NanoQx FPV Board
MicroMWC (MOSFETs need to be replaced when using 8.5mm motors)
SciSky (not tested by my own yet but should fit)
Cam and vTx:
NanoQx FPV Cam
Spektrum Ultra Micro FPV CAM SPMVA1100
Selfmade like this: http://flitetest.com/articles/diy-micro-5-8ghz-fpv
(but if you get this to fit, its more like a bumblebee then a firefly ;) )
Get the "Bumblebee Backpack" here: http://www.thingiverse.com/thing:1134205
Rotors:
Standard Hubsan x4
Standard Revell Atomium
Energy:
I recommend these for a flight duration of about 5-7min depending on your style and motors: 1s 3,7V 500mAh (http://r.ebay.com/a1v5I0)
Velcro to strap it (10mm)
If you have questions, don't be shy. :)
It fits the original NQX Cam or the additional Spektrum Micro Cam.
Its available for 6mm, 7mm and 8.5mm Motors.
You can bend the camera holder if you heat it up a bit, but be careful.
Frame size is at ~110 mm diagonal (m2m) and about 9 x 9 cm in length and width.
Frame weighs between 6g and 7g.
Example Setups that will fit and are tested:
Motormounts:
Motor holders for this frame can be found in the "CopterCustoms"-Group. (http://www.thingiverse.com/thing:1133331)
Motors 6mm:
micro-motor-warehouse.com: CL-0615-11, CL-0615-14
Standard NanoQx
Motors 7mm:
micro-motor-warehouse.com: CL-0720-12, CL-0720-14
Standard Hubsan x4 H107L
Motors 8.5mm:
micro-motor-warehouse.com: CL-0820-15, CL-0820-17 Dark Edition
Standard Hubsan x4 H107D, H107C
Flight Control:
(for a proper fit, you should remove the motor plugs and solder the motors directly to the board):
NanoQx Board (MOSFETs need to be replaced when using 8.5mm motors)
NanoQx FPV Board
MicroMWC (MOSFETs need to be replaced when using 8.5mm motors)
SciSky (not tested by my own yet but should fit)
Cam and vTx:
NanoQx FPV Cam
Spektrum Ultra Micro FPV CAM SPMVA1100
Selfmade like this: http://flitetest.com/articles/diy-micro-5-8ghz-fpv
(but if you get this to fit, its more like a bumblebee then a firefly ;) )
Get the "Bumblebee Backpack" here: http://www.thingiverse.com/thing:1134205
Rotors:
Standard Hubsan x4
Standard Revell Atomium
Energy:
I recommend these for a flight duration of about 5-7min depending on your style and motors: 1s 3,7V 500mAh (http://r.ebay.com/a1v5I0)
Velcro to strap it (10mm)
If you have questions, don't be shy. :)
Similar models
thingiverse
free
FireFlo v3 by SirQuentin
...style and motors: 1s 3,7v 500mah (http://r.ebay.com/a1v5i0)
velcro to strap it (10mm)
if you have questions, don't be shy. :)
thingiverse
free
60mm Hubsan hack 8.5mm motors by Simba5
... with 8.5mm motors. the frame weight is only 5 grams.
http://micro-motor-warehouse.com/collections/all-motors/products/cl-0820-17
thingiverse
free
Superlight Microquad Frame for 8.5mm Motors & Nano QX board by geekaz01d
...x fpv board (20mmx20mm bolt pattern) and 8.5mm motors.
http://www.micro-motor-warehouse.com/collections/all/products/cl-0820-15
thingiverse
free
Superlight Microquad Frame for 8.5mm Motors & AlienWii by geekaz01d
...se.com/collections/8mm-custom-builds/products/alien-fc
http://www.micro-motor-warehouse.com/collections/all/products/cl-0820-15
thingiverse
free
Hubsan x4 frame super light 7mm motors (micro quadrocopter) by hiperigo
...an x4 frame super light 7mm motors (micro quadrocopter) by hiperigo
thingiverse
light frame for hubsan x4 electronics 7mm motors
thingiverse
free
Hubsan H107C X4 FPV Racer Frame 110 by Hackbert
...h-600mah
1x hubsan h107c x4 (electronic)
4x m3 nylon screws
1x fpv camera fx797t 3-in-1 super mini 5.8g 40ch av video transmitter
thingiverse
free
8.5mm Motor Mount for Micro Quadcopters (Hubsan X4) by Islemunda
...unt for micro quadcopters (hubsan x4) by islemunda
thingiverse
you can use this motor mount to create your own quadcopter frame.
thingiverse
free
AlienWii Micro Quadcopter by Pattison_Engineering
...ouse and picnic quads.
printed and tested one today. flies quite well. could probably be improvd however. use at your own risk.
grabcad
free
110MM NANO QUAD FRAME
...110mm nano quad frame
grabcad
6 gr frame!
for 8.5mm dia. motors
works great with hubsan x4 board
thingiverse
free
Micro Quadcopter Drone Frame V2 (Made for Hubsan X4 electronics) by Islemunda
...n fly this quadcopter with hubsan x4 electronics (8.5mm motors).
i have also build a v1 frame design. checkout my other things!
Sirquentin
thingiverse
free
FireFlo v2 Motormounts by SirQuentin
...nts designed for the fireflo v2 frame. (http://www.thingiverse.com/thing:1133306)
they are available in 6, 7 and 8.5mm.
have fun.
thingiverse
free
CP180 Xiaomi Yi Mount by SirQuentin
...").
it has a strap guide and a nipple to avoid slipping using the tripod thread.
if you have questions, don't be shy. :)
thingiverse
free
Shendrones Corgi RunCam PZ0420M L28 Camera Mount by SirQuentin
...rent simple cam mounts for a runcam pz0420m with 2.8 lens (1/3" sony super had ccd 600 tvl) used on a shendrones corgi frame
thingiverse
free
Shendrones Corgi Polaroid Cube Camera Mount by SirQuentin
...fit better with the elastic material the cube provides! also the hole on the back got a 0.5mm push to the front for a better fit.
thingiverse
free
Shendrones Corgi XT60 Backmount FLEX by SirQuentin
...cting a lipo
now just slide the mount over the bottom plate of the battery tray. because it is flex it should fit and sit tight!
thingiverse
free
FireFlo v3 by SirQuentin
...style and motors: 1s 3,7v 500mah (http://r.ebay.com/a1v5i0)
velcro to strap it (10mm)
if you have questions, don't be shy. :)
thingiverse
free
QX 90 Frame by Evan_C
...i got some inspirations from the fireflo v3 by sirquentin and the orientable camera mount of the eachine falcon...
thingiverse
free
Micro Hex /w camera mount and BBB-FC holder 8.5mm by Puppetx
...camera which has a slight upward tilt, inspired by sirquentin#39;s fireflo series quad. big thanks to brod for the...
thingiverse
free
FireFlo V3 SPRacingF3 8.5mm motor by syahriansyah
...all, i would like to say thank you to sirquentin for this great quad. but, i'm having trouble connecting...
Fireflo
thingiverse
free
FireFlo v2 Motormounts by SirQuentin
...nts designed for the fireflo v2 frame. (http://www.thingiverse.com/thing:1133306)
they are available in 6, 7 and 8.5mm.
have fun.
thingiverse
free
Fireflo v2 nano qx fc mount by Jesse_Blue
...mount by jesse_blue
thingiverse
adaptor to mount the nano qx fc on the fireflo frame with the original plugs/sockets on the pcb.
thingiverse
free
FireFlo v2 VTX backpack codename 'bumblebee' by Jesse_Blue
...tion and mount your vtx on it by using double sided tape.
after printing it you should clean out the holes with a 3mm drill bit.
thingiverse
free
FireFlo with VTX tray, battery fairing by richardbounds
... tie).
motor protectors are from here: http://www.thingiverse.com/thing:1133331
weighs 50g without battery, printed in carbonfil.
thingiverse
free
FireFlo v3 by SirQuentin
...style and motors: 1s 3,7v 500mah (http://r.ebay.com/a1v5i0)
velcro to strap it (10mm)
if you have questions, don't be shy. :)
thingiverse
free
FireFlo V3 SPRacingF3 8.5mm motor by syahriansyah
... battery weighs about 50gr
let me know if anyone needs a 7mm motor version
motor mounts: http://www.thingiverse.com/thing:1133331
thingiverse
free
QX 90 Frame by Evan_C
...a camera modification i got some inspirations from the fireflo v3 by sirquentin, and the orientable camera mount of...
thingiverse
free
MiniQuad 3.7 by MyOwn3Dworld
...this one for the frame and the anti-vibration dampers fireflo v3http://www.thingiverse.com/thing:1152714 so, i decide to draw my design combining...
thingiverse
free
Micro Hex /w camera mount and BBB-FC holder 8.5mm by Puppetx
...which has a slight upward tilt, inspired by sirquentin's fireflo series quad. big thanks to brod for the .scad...
V2
3d_export
free
Lamp v2
...lamp v2
3dexport
lamp v2 with solar panel
3d_export
$5
hammerhead v2
...hammerhead v2
3dexport
razer hammerhead v2 headphones, modeled in cinema 4d, render in corona
3d_export
$5
manometer v2
...manometer v2
3dexport
3d_export
$5
potato v2
...potato v2
3dexport
turbosquid
$52
Lifebuoys v2
...squid
royalty free 3d model lifebuoys v2 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1560870)
turbosquid
$2
Mask v2
...turbosquid
royalty free 3d model mask v2 for download as stl on turbosquid: 3d models for games, architecture, videos. (1527741)
turbosquid
$20
Kitchen V2
...ty free 3d model kitchen v2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1155111)
turbosquid
$20
kengkod64-v2
... free 3d model kengkod64-v2 for download as 3dm, ztl, and stl on turbosquid: 3d models for games, architecture, videos. (1701415)
turbosquid
$19
Chair v2
...yalty free 3d model chair v2 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1693360)
turbosquid
$15
Table v2
...yalty free 3d model table v2 for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1688743)