Thingiverse
Fine Ajustment Z Endstop for Anet A6 by Alexandr_sk8
by Thingiverse
Last crawled date: 4 years, 7 months ago
Alternative attachment for Z endstop for my printer Anet A6.
I decided to do it when I started to change different nozzles, and they differ slightly from different suppliers visually, and therefore in height. And I had to adjust every time hotbed under each nozzle. With this mount, you can very accurately adjust the position of the Z-axis, adjusting to different nozzles or if you like to print something on the glass, then on a regular table. Even after installing the glass you will have to invent something.
For installation, a bit of additional hardware is required:
1 bolt m4 * 70-75mm
2 m4 nuts (one in order to fix the bolt, one to insert into the fasteners)
2-3 additional self-tapping m2 * 12 (I had an extra for my Anet A6)
I decided to do it when I started to change different nozzles, and they differ slightly from different suppliers visually, and therefore in height. And I had to adjust every time hotbed under each nozzle. With this mount, you can very accurately adjust the position of the Z-axis, adjusting to different nozzles or if you like to print something on the glass, then on a regular table. Even after installing the glass you will have to invent something.
For installation, a bit of additional hardware is required:
1 bolt m4 * 70-75mm
2 m4 nuts (one in order to fix the bolt, one to insert into the fasteners)
2-3 additional self-tapping m2 * 12 (I had an extra for my Anet A6)