CG Trader
Filter Cup Assy for MSA Mask | 3D
by CG Trader
Last crawled date: 3 years, 4 months ago
File: Cup Assy.stl
Name: Filter Cup Assy for MSA Mask
ABS or Resin Material: 44.79 grams (0.099 lbs)
Infill = % 10
Size: 71.63 mm (2.82 ) x 57.57 mm (2.27) x 52.40 mm (2.06)
Resolution: 0.20mm
Layers: 268 layers Rafts: Yes Supports: No
Print Time: 4 hr 55 min
Function: This device is used an MSA or MSA compatible face mask. It should be printed 1:1. Do not print with PLA since
PLA will break down when exposed to UV light. The idea is to print this on a printer and stuff the inside with 43mm
(1.7) square pieces of air conditioner filter (hopefully the good stuff that stops germs). When it gets used, throw
out the filter material and place the cup and lid in a UV curing station and then restuff the filter and go back t work.
Name: Filter Cup Assy for MSA Mask
ABS or Resin Material: 44.79 grams (0.099 lbs)
Infill = % 10
Size: 71.63 mm (2.82 ) x 57.57 mm (2.27) x 52.40 mm (2.06)
Resolution: 0.20mm
Layers: 268 layers Rafts: Yes Supports: No
Print Time: 4 hr 55 min
Function: This device is used an MSA or MSA compatible face mask. It should be printed 1:1. Do not print with PLA since
PLA will break down when exposed to UV light. The idea is to print this on a printer and stuff the inside with 43mm
(1.7) square pieces of air conditioner filter (hopefully the good stuff that stops germs). When it gets used, throw
out the filter material and place the cup and lid in a UV curing station and then restuff the filter and go back t work.