Cults
Filament spool stand with spindle and spindle axis
by Cults
Last crawled date: 6 years, 2 months ago
-Cabochon coming insert on the side of the filament coil (3 files available 51 mm, 53 mm, 55 mm) for an axis of 10 mm (for my part to buy expensive Castorama tube of a meter for a little less of 7 €).
-Support of axis of coils for a box (axis of 10 mm)
Fits on any storage box.
It is composed of 2 parts: an outside and an inside.
To assemble it you need: - 1 screw (3 mm diameter and 10 mm long) and 8 nuts
- 1 tube for the axis of 10 mm in diameter
The fixing holes are butchered on a very small depth, otherwise it is very difficult to print well if they are completely empty.
So just drill them.
-Support of axis of coils for a box (axis of 10 mm)
Fits on any storage box.
It is composed of 2 parts: an outside and an inside.
To assemble it you need: - 1 screw (3 mm diameter and 10 mm long) and 8 nuts
- 1 tube for the axis of 10 mm in diameter
The fixing holes are butchered on a very small depth, otherwise it is very difficult to print well if they are completely empty.
So just drill them.
Similar models
cults
$1
Spool reel stand with spindle
...butchered on a very small depth, otherwise it is very difficult to print well if they are completely empty.
so just drill them.
cults
$1
Filament spool shaft
...ilable 51 mm, 53 mm, 55 mm) for a 10 mm axis (for my part to buy expensive castorama tube of a meter for a little less than € 7).
cults
free
Support Filament Reels (under shelf)
...if your printer is very high if not pvc, carton ...)
- two three screws
the small hole allows the passage of a steel rod of 6 mm
cults
free
Portico Door Rolls Filaments
...n battens 27x27mm for feet long also as you want and can.
very useful to have its coils above his printer to change over quickly.
cults
free
Support for filament roll
...ent roll, 3 cm shaft and 10 cm maximum roll diameter.
support for filament roll, 3 cm shaft and 10 cm maximum roll diameter.
cults
$6
Coil holder
...ly, with the weight of the coils, there is a shear effect due to the printing by layer of filament.
maximum coil thickness: 70mm
cults
$1
BEARING BEARING 08-24-07 mm
... mm
cults
rolling beetle bearing ball
bearing inside diameter 8mm outside diameter 24mm height 7mm number of ball 10 best regards
cults
free
Filament coil support
...filament coil support
cults
accessories 3d
for coil ø200
2 games: 1 lg 60 + 1 lg 82
(coils 250, 750 and 1000 gr)
cults
free
Wall bracket for coil
...artment, it has the advantage of being very simple to fix, since it only takes a frame hook, so only a tip to plant. (see photos)
cults
$2
ecodesign spool holder
...at 110 mm long axis fixed by 5 mm screws.
reduced to the maximum for the minimum of matter.
with upright of 0.4 mm thickness.
Spindle
cults
free
Zheng3 Tinkeriffic 40mm Spool Spindle
...zheng3 tinkeriffic 40mm spool spindle
cults
zheng3 tinkeriffic 40mm spool spindle
zheng3 tinkeriffic 40mm spool spindle
cults
$1
Spool reel stand with spindle
...butchered on a very small depth, otherwise it is very difficult to print well if they are completely empty.
so just drill them.
cults
free
CNC Adapter
...cnc adapter cults 52mm cnc engraving er11 spindle with this adapter you can transform your 3d printer...
cults
free
Dremel adapter
...dremel adapter cults cnc dremel milling spindle subtractive similar to https://cults3d.com/en/tool/cnc-adapter - it allows you to...
cults
free
Universal stand-alone filament spool holder (Fully 3D-printable)
...right from your 3d printer's filament. the spool holder's spindle is shaped to fit the vast majority of commonly...
cults
free
Anet A6 Left upper bracket for higher Z axis
...remake this “left upper bracket for the rod and spindle support”. because there is not enough time ever, i...
cults
free
BIG DIY 3D Printer
...m8 bolt or threaded rod 85mm and nuts 2x spindle 8mm and spindle nut or m8 threaded rod and...
cults
free
Land yacht propeller / Prop with propeller
...are caused by small stones for steering and wheel spindle you will find parts of yachting pla realization layer...
cults
free
Lynx - Fully 3D-printable 1/10 4wd buggy
...news - 16.08.2017 changed the rear suspension arm and spindle to move the wheels farther away from the body...
Coil
cults
free
Coil thing
...coil thing
cults
coil thing
coil thing
cults
free
Coil Spring
...coil spring
cults
coil spring
coil spring
cults
free
coil support
...coil support
cults
support for coils
cults
$6
Coil holder
...ly, with the weight of the coils, there is a shear effect due to the printing by layer of filament.
maximum coil thickness: 70mm
cults
free
Witbox Coil Support
...il spool_support support support_bobine witbox
this support can upload multiple coils and allows quick assembly and disassembly.
cults
$3
Coil Man
...coil man
cults
coil man homem mola os impossíveis the impossibles hanna barbera
personagem do desenho "os impossíveis"
cults
free
Coil holder
...er
cults
roll holder support coil support
no support provided with my aurora z605, so here are mine.
always modeled under sw2015.
cults
free
Filament coil support
...filament coil support
cults
accessories 3d
for coil ø200
2 games: 1 lg 60 + 1 lg 82
(coils 250, 750 and 1000 gr)
cults
free
Support coils to hang
...the reels of some brand (even in 750g), the width is too big of 3cm.
short accepts reels of max width of 58mm and large of 88mm
cults
$1
DOOR COIL OF PLA ON SHELVING
...door coil of pla on shelving
cults
a door of pla coil on the rolls on the side i have screwed 2 balls of 3mm for the axes
Arrangement
cults
$1
Cable Tidy
...cable tidy cults cables arrangement house this small gadget allows you to group the...
cults
free
Storage box
...storage box cults arrangement storage box...
cults
free
box
...box cults box arrangement art small storage...
cults
free
Storage box 3
...storage box 3 cults arrangement storage box 3...
cults
free
Storage box 2
...storage box 2 cults arrangement storage box 2...
cults
free
Garage cars
...garage cars cults cars car arrangement box car storage...
cults
free
Box for Voltmeter
...box for voltmeter cults box arrangement voltmeter storage box for voltmeter voltcraft...
cults
free
Multi-purpose box
...multi-purpose box cults box arrangement unverselle pot multi-purpose...
cults
$1
Cable and cable reel
...cable and cable reel cults cable cords data processing arrangement so the cords will be...
cults
$1
Anet support
...anet support cults anet tool tool support arrangement support tools for anet...
Outside
cults
free
Think outside the bottle vases
...think outside the bottle vases
cults
think outside the bottle vases
think outside the bottle vases
cults
free
Think outside the mini bottle vases
...think outside the mini bottle vases
cults
think outside the mini bottle vases
think outside the mini bottle vases
cults
$4
Japanese lantern outside with red foot
...ulture light red
traditional japanese lantern with red foot.
lantern in 3 parts, or in full:
- foot
- central part
- roof
cults
$5
rail
...rail cults outside garden art balcony or garden edge...
cults
$2
outdoor bench
...outdoor bench cults bench outside furniture simple outdoor...
cults
$1
hexagonal table
...hexagonal table cults table outside decoration garden hexagonal outdoor...
cults
free
cz p09 holster
...holster cults cz p09 holster. for 1.5 inch belts. righthand-outside the...
cults
free
outdoor round table
...outdoor round table cults outside garden art marble style outdoor round table for deco...
cults
$4
Japanese outdoor lantern
...lantern japanese japan culture light japanese lantern for the outside useful to put a candle for...
cults
$1
Toothed wheel
...toothed wheel cults toothed wheel design in catia v5. outside diameter 20 mm internal diameter 11.5...
Axis
cults
$1
axis socket
...axis socket
cults
base for axis that can be modified via cura or other
cults
free
Axis for hospitals
...axis for hospitals
cults
haletères various
axis for hosts, it will be necessary to insert the ends 1 and 2 inside.
cults
free
FABtotum 4th Axis Chuck
...fabtotum 4th axis chuck
cults
fabtotum 4th axis chuck
fabtotum 4th axis chuck
cults
free
Vertical Axis Turbine
...ius energy wind river
this is a vertical axis turbine that can be used to generate energy with small water currents or even wind.
cults
free
Cable chain for x-axis and z-axis
...cable chain for x-axis and z-axis
cults
prusa i3 reprap 3d printer
cable chain for those who want tidy cables
cults
free
staple 8 axis
...ts
clip axis 8
realization of a fixing kit axes and staple for assembly piece by means of hole of 8.2 mm for thicknesses 4,6,8 mm
cults
free
New FABtotum chuck for 4th axis
...new fabtotum chuck for 4th axis
cults
new fabtotum chuck for 4th axis
new fabtotum chuck for 4th axis
cults
free
AM8 MGN12 z-axis / extended x-axis 300 buildplate
...e mounts. print the x-axis with supports on.
1 side of parts is included. just mirror the part in your slicer for opposite side.
cults
free
Guide holder D10 with axis lock
...lder d10 with axis lock
cults
axis guide holder
fixing with 2 screws and nuts m5
axis locked by screw
. com / blog / resources /
cults
free
Z-Axis Double Rod Stabilizer for Printrbot
...s double rod stabilizer for printrbot
cults
z-axis double rod stabilizer for printrbot
z-axis double rod stabilizer for printrbot
Spool
cults
free
spool holder for several spool filament
...spool holder for several spool filament
cults
spool holder for several filament
spool holder for several spool filament
cults
$2
Spool holder
...spool holder
cults
spool holder
spool holder
cults
free
Cable Spool
...cable spool
cults
cable spool
cable spool
cults
$1
Spool on the filament
...spool on the filament
cults
spool filament
design in catia v5
cults
free
Spool Lock Lever (for Ø200mm spool)
...)
cults
useful when printing without the side cover (spool side) of fabtotum.
assemble with a selftapping screw ø3mm x 10-15mm.
cults
free
Atom2 spool holder
...atom2 spool holder
cults
atom2 spool holder
atom2 spool holder
cults
free
Filament Spool Stand
...filament spool stand
cults
filament spool stand
filament spool stand
cults
free
Simple Spool Holder
...simple spool holder
cults
simple spool holder
simple spool holder
cults
free
Swappable Spool Holder
...swappable spool holder
cults
swappable spool holder
swappable spool holder
cults
free
simple spool holder
...simple spool holder
cults
simple spool holder
simple spool holder
Inside
cults
free
Bingbong (inside out)
...bingbong (inside out)
cults
bingbong (inside out)
cults
free
Bingbong's rocket (in inside out)
...ude bingbong, but you can find him here: https://cults3d.com/en/game/bingbong-inside-out
when assemble you need cutter and glue.
cults
free
SANTA STAR -with a Tingling Heart inside-
...amp;amp; choose your x-mas tree!
watch the little heart inside swing and tingling for you....
have a nice one!
the bon garçon.
cults
$6
HO double tunnel
...ho 1 facade and interior in 4 parts 1 inside right of 47mm 1 inside right of 10mm 1...
cults
$1
bird feeder
...bird feeder cults bird feeder inside diameter...
cults
free
PHONE AMPLIFIER
...so nothing gets inside. and then the phone does inside it and the music gets amplified through the small...
cults
free
Whistle
...made as a single impression with the ball trapped inside ...
cults
free
table
...table cults table inside decoration simple 3-legged...
cults
$6
Pendentif spring
...spring cults pendant pendant style spring with double spheres inside ...
cults
$6
Dodecahedron case
...dodecahedron case cults case box jewel luxury inside diameter: 26mm...
Box
cults
free
Boxes
...boxes
cults
boxes
boxes
cults
free
box
...box
cults
box arrangement art
small storage box
cults
free
Box
...box
cults
box
candy box and much more, fell free to use it the way you want.
cults
free
zZcube's Music Box (Tune Box)
...zzcube's music box (tune box)
cults
zzcube's music box (tune box)
zzcube's music box (tune box)
cults
free
Twist box
...twist box
cults
box
simple box
cults
$1
Jewelry box
...jewelry box
cults
jewelry box
small box for home use, jewelry boxing for eample
cults
free
Box to assemble - box manufacture
... go up, to offer a jewel that knows!
can serve as a puzzle too!
to discover the gift it will open the box, easy enough.
a +
nop21
cults
free
Box for jewelry
...box for jewelry
cults
box for jewelry
box for jewelry
cults
free
Pencil Box
...pencil box
cults
pencil box
pencil box
cults
free
Gift Box
...gift box
cults
gift box
gift box
Stand
cults
free
Stand
...stand
cults
stand
stand
cults
free
iPhone stand
...iphone stand
cults
iphone stand
iphone stand
cults
free
iPad stand
...ipad stand
cults
ipad stand
ipad stand
cults
free
Mouse Stand
...mouse stand
cults
mouse stand
mouse stand
cults
free
standing meerkat
...standing meerkat
cults
standing meerkat
standing meerkat
cults
free
Provision Stand
...provision stand
cults
provision stand
provision stand
cults
free
Stand for napkins
...stand for napkins
cults
stand for napkins
stand for napkins
cults
free
Stand for spices
...stand for spices
cults
stand for spices
stand for spices
cults
free
Chocolate Stand
...chocolate stand
cults
chocolate stand
chocolate stand
cults
free
Taco Stand
...taco stand
cults
taco stand
taco stand
Filament
cults
free
Filament clip / Universal filament clip
...t clip
cults
pliers filament clip universal
here is a new model of filament clip, finally there it would be more a filament clamp
cults
free
filament joiner
...filament joiner
cults
filament joiner
filament joiner
cults
free
Guide filament
...
cults
filament prusa i3
compatible with the filament holder, it allows to guide the filament in order to facilitate the printing
cults
$1
Filament keepers
...t keeper
a set of 5 filament keepers got 1 with a spool of filament and made these in sketchup since i needed a gob more of them
cults
free
Filament Door
...filament door
cults
door filament
filament holder for geeetech prusa i3.
m8 threaded rod to secure the whole
cults
$1
Spool on the filament
...spool on the filament
cults
spool filament
design in catia v5
cults
free
Filament clip
...in addition, when you take the reel out of the printer, just pass the filament in one of the holes, and it no longer takes place.
cults
free
Filament Duck - filament spool stand (94/64mm)
... duck - filament spool stand (94/64mm)
cults
filament duck - spool stand (94/64mm)
filament duck - filament spool stand (94/64mm)
cults
free
Filament holder
... one to fit all the different sizes of filament spools.
it’s very fast and easy to change the filament. :-)
printed in white abs
cults
free
Filament Clip, Filament Holder, Filament Keeper
... the same clip but with a smaller opening so that it will tightly fit on spools with thinner sidewalls. let me know how it works.
Support
cults
free
Support
...support
cults
gadget ergonomic smartphone support useful
0
cults
$1
supporters
...supporters
cults
model academic sport movement man impression 3d deco support
3 characters from the fan series
cults
$25
Support USB
...support usb
cults
support usb
support usb
cults
$2
Support trompet
...support trompet
cults
support trompet
support trompet
cults
$2
Support rabbit
...support rabbit
cults
support rabbit
support rabbit
cults
$2
support smile
...support smile
cults
support smile
support smile
cults
$2
Support apple
...support apple
cults
support apple
support apple
cults
$2
Support banana
...support banana
cults
support banana
support banana
cults
$2
Support bouche
...support bouche
cults
support bouche
support bouche
cults
$2
Support supercar
...support supercar
cults
support supercar
support supercar