Thingiverse
Filament Spool Holder with 2 Bearings by Paddy_91088
by Thingiverse
Last crawled date: 4 years, 1 month ago
Printed in 11 Hours
I have created for the Spool Attachment from my Sovol SV01 , fits with Ender 3 Pro too
Cut The Borehole Thread M6x1, use a M6 Screw
Layer Thickness 0,22
Infill 30%
Speed 60mm/s
Brim Yes
Supports Yes
When assembling, leave 0.5mm distance to the rear wall.
Fix with a little glue if the moving part does not get stuck on the mandrel
I have created for the Spool Attachment from my Sovol SV01 , fits with Ender 3 Pro too
Cut The Borehole Thread M6x1, use a M6 Screw
Layer Thickness 0,22
Infill 30%
Speed 60mm/s
Brim Yes
Supports Yes
When assembling, leave 0.5mm distance to the rear wall.
Fix with a little glue if the moving part does not get stuck on the mandrel