Thingiverse
Filament Runout Sensor remix by BrienAllison
by Thingiverse
Last crawled date: 4 years ago
A remix of this filament runout sensor case: https://www.thingiverse.com/thing:3918853
The microswitch I had didn't fit the original file so I made a larger gap for the microswitch roller to fit. This also means the filament path is less restrained which is fine for rigid filaments but I'm unsure how flexibles will fair.
I also made a simple lid for the case to enclose it. There are two versions, one with a gap for the LED and one without. Both print in the default orientation without supports and simply clip on and off.
STEP and fusion 360 files for the lid are provided if you wish to modify them.
The microswitch I had didn't fit the original file so I made a larger gap for the microswitch roller to fit. This also means the filament path is less restrained which is fine for rigid filaments but I'm unsure how flexibles will fair.
I also made a simple lid for the case to enclose it. There are two versions, one with a gap for the LED and one without. Both print in the default orientation without supports and simply clip on and off.
STEP and fusion 360 files for the lid are provided if you wish to modify them.