Filament Roll holder 54mm / 52 (Herz filament) by 7eggert

Last crawled date: 3 years, 1 month ago

Spool holder for spools that have one side 5.4 mm nut, 5.2 mm inner diameter, no nut on the other side (needs a rim on the holder plate). I got these rolls with 1 kg Herz filament.
Center hole in this plate is 8 mm. It has a pair of 6 mm holes to put a screw through, 5.5 mm to drill a thread for these screws and 6 mm square holes for locking screws. I didn't need any of these yet.
I'm using two self-locking nuts on a 8 mm threaded rod to hold the 5,4 mm plate, and two normal nuts from the outside touching but not pressing against the 5.2 mm plate.
The rim of the 5.2 mm disk needs support.
STL files should be the same as the OBJ files. I used the OBJ files for printing.
See also: https://www.thingiverse.com/thing:3335750