Thingiverse
Filament guide for Snapmaker 2.0 by Dogan1971
by Thingiverse
Last crawled date: 4 years, 5 months ago
This is a guide for filament for Snapmaker 2.0.
For easier printing made out of 2 parts, which snap together (can be glued if needed).
The guide has 2.00 mm gap, which lets the 1.75 mm filament go through it, but doe snot let it fly closely.
The guide is mounted with M5 bolts to the top of Z-axis.
Required:
4 M5x10 bolts
For easier printing made out of 2 parts, which snap together (can be glued if needed).
The guide has 2.00 mm gap, which lets the 1.75 mm filament go through it, but doe snot let it fly closely.
The guide is mounted with M5 bolts to the top of Z-axis.
Required:
4 M5x10 bolts