fibonacci spiral pencil/match/gluegunrod/bolt/drillbit holder lamp by Zoon1234micron

Last crawled date: 3 years, 1 month ago

STL PRINTING NOTES: RESIZE STL by 380% for hex drill and screwdriver bits
The scad files are fibonacci orbs made of objects rotated towards the center, so you can make any kind of lamp and fibonacci based object from 8 to 1232 fascia. There is also a SCAD fibonacci sphere code on thingiverse.
There are 100+ .scad files in a .zip with different numbers of pencils from 8 to 1232 pencils because i had to generate them in a different program.
if you want to use it commercially please tip me, i had to write a SCAD code parser to send matrices from another program. (even just to encourage me to upload more files)
SCAD FILE INSTRUCTIONS:
Notes: RESIZE STL by 380% for drill bit.
The hexagons are 2.0 from corner to corner. a drill bit is 7.333mm largest diameter, so resize to get ~7.6mm it fits for me.....
1 - choose the scad file with the number of pencils/drill bits you want to put away...
2 - resize the spheres to in the SCAD file to suit the number of holes/ holder size.
3 - change the cylinders #fn value from 6 to 20 segments if you want
4 - you can change the sphere number of fragments to make it look nicer, default is 100, it should be more on large spheres. OpenScad buffs can check this code : http://www.thingiverse.com/thing:370871
5 - you can devide it in two halves by copying the scad with a half sphere on top of the array and adjusting the loop number.
that's all ,print the fibonacci spiral/pencil holder
If you want to make fibonacci sphere based anything in scad, this is probably the best place for it. lamps, anything round. Thanks all!
If you have access to a round piece of steel, place a magnet on the steel inside the drill bit holder, then the drill bits will hold in place in a easyfit fasion.
Also good for:
Screws
cultery
bolts
pencils
matches
makes lamps