Fiat x1/9 High Brake Light by geekdaddy 3d model
3dmdb logo
Thingiverse
Fiat x1/9 High Brake Light by geekdaddy

Fiat x1/9 High Brake Light by geekdaddy

by Thingiverse
Last crawled date: 3 years ago
This is a housing for a high-mounted 3rd brake light which can be fitted into a Fiat (or Bertone) X1/9. Early 80's and 70's models did not have this feature.
This light is designed to accommodate a 12V LED strip (there are several on eBay. The housing can be affixed to the trim molding above the rear glass with 3M double stick tape and is very low profile. You'll need to run a ground and +12v brake wire up through the targa top and to the brake light to make it work. See photos of the printed part and the final version which was painted and installed in my X1/9.

Tags