FG Baja 4WD Lipo Case by Tormentor22

Last crawled date: 4 years, 5 months ago

I created a case for a 2s lipo used as a RX power supply in my 1:6 FG Baja 4WD Buggy. The case got a kind of heat shield on the top and the back (3mm) to prevent damage from heat from the exhaust. Also i added a little plane at the bottom to preserve the lipo from little stones which sometimes comes into the chassis.
I suggest to print it in ABS. Especially in my model (i use a pocket bike exhaust - see the pics attached) it can get very hot in this region.