Thingiverse
fatshark receiver module dock by the_nerdling
by Thingiverse
Last crawled date: 4 years, 7 months ago
fits a 10 pin socket and a small perf board to give it strength (about 3 holes wide, might need to sand it to fit
fits the boost converter linked, has a cutout for wires
https://www.ebay.com.au/itm/DC-DC-Boost-Converter-Step-Up-Module-1V-5V-to-Stable-5Volts-500mA-Power-Module/262997798474?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
i used eachine vr006 goggles
powered the boost converter straight from the external battery (two 18650 cells in parallel, connected to the stock battery connector on the mainboard)
the video goes to the video in port on the goggles, the stock receiver is still intact so you can switch between it and the external receiver
fits the boost converter linked, has a cutout for wires
https://www.ebay.com.au/itm/DC-DC-Boost-Converter-Step-Up-Module-1V-5V-to-Stable-5Volts-500mA-Power-Module/262997798474?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
i used eachine vr006 goggles
powered the boost converter straight from the external battery (two 18650 cells in parallel, connected to the stock battery connector on the mainboard)
the video goes to the video in port on the goggles, the stock receiver is still intact so you can switch between it and the external receiver