Thingiverse
Fatshark headband and power supply mod by gyjofi
by Thingiverse
Last crawled date: 4 years, 7 months ago
I don't like the side mounted battery on a small goggles, that is why I designed a little hook for a 3 straps headband and a little power supply box with power switch.
The parts what I used:
Eachine VR006 headband https://www.banggood.com/Eachine-VR006-Elastic-Head-Band-For-FPV-Goggles-p-1185224.html
2S balance plug (I cut it from a bad 2S battery)
5.5x2.1mm 90 degree DC plug (cut the JST off) https://www.banggood.com/JST-to-DC-Adapter-for-Fatshark-Battery-p-1128902.html
2.6V-30V Mini Digital Voltmeter https://www.banggood.com/3Pcs-Yellow-LED-0_28-Inch-2_6V-30V-Mini-Digital-Voltmeter-Voltage-Tester-Meter-p-980046.html
7x7mm switch (it has 6 pins, so it can switch the ground and voltage too) https://www.aliexpress.com/item/20PCS-Lot-7X7mm-7-7mm-6Pin-Push-Tactile-Power-Micro-Switch-Self-lock-On-Off-button/32724808757.html
Eachine 2200 mAh battery for VR-D2 https://www.banggood.com/Eachine-VR-D2-FPV-Goggles-Spare-Part-7_4V-2200mAh-Lipo-Battery-p-1086637.html
5.5X2.1mm Female adapter https://www.banggood.com/0_4M-5_5X2_1mm-Female-Adapters-DC-Power-Extension-Connector-Cable-p-965315.html
2pcs simple hair clips to hold the power box on the head strap :) https://www.banggood.com/50pcs-Metal-Black-Waved-Hair-Clips-Salon-Pins-Grips-Hairpins-Barrette-p-80398.html
The strap hook should be bent a little bit to curve of faceplate.
Use 2 sided tape to stick the hook to the faceplate and than stick the velcro on it. The 2 sided tape is strong enough to hold the strap hook.
The parts what I used:
Eachine VR006 headband https://www.banggood.com/Eachine-VR006-Elastic-Head-Band-For-FPV-Goggles-p-1185224.html
2S balance plug (I cut it from a bad 2S battery)
5.5x2.1mm 90 degree DC plug (cut the JST off) https://www.banggood.com/JST-to-DC-Adapter-for-Fatshark-Battery-p-1128902.html
2.6V-30V Mini Digital Voltmeter https://www.banggood.com/3Pcs-Yellow-LED-0_28-Inch-2_6V-30V-Mini-Digital-Voltmeter-Voltage-Tester-Meter-p-980046.html
7x7mm switch (it has 6 pins, so it can switch the ground and voltage too) https://www.aliexpress.com/item/20PCS-Lot-7X7mm-7-7mm-6Pin-Push-Tactile-Power-Micro-Switch-Self-lock-On-Off-button/32724808757.html
Eachine 2200 mAh battery for VR-D2 https://www.banggood.com/Eachine-VR-D2-FPV-Goggles-Spare-Part-7_4V-2200mAh-Lipo-Battery-p-1086637.html
5.5X2.1mm Female adapter https://www.banggood.com/0_4M-5_5X2_1mm-Female-Adapters-DC-Power-Extension-Connector-Cable-p-965315.html
2pcs simple hair clips to hold the power box on the head strap :) https://www.banggood.com/50pcs-Metal-Black-Waved-Hair-Clips-Salon-Pins-Grips-Hairpins-Barrette-p-80398.html
The strap hook should be bent a little bit to curve of faceplate.
Use 2 sided tape to stick the hook to the faceplate and than stick the velcro on it. The 2 sided tape is strong enough to hold the strap hook.