Thingiverse
Fan tray for Cluster A+6
by Thingiverse
Last crawled date: 5 years, 6 months ago
Fan tray for the Cluster A+6.
The PCB fixes into the tray using M2.5 inserts glued into the tray.
Fans are 60mm (5v), the cables can be fed through the small gap to keep things tidy.
hardware needed
4x M2.5 copper inserts
2x M5 Fan screw (the bracket is 2 mm so you may need long screws depending on the fan).
2x 60 mm Fan
2x 60 mm Fan shield
The PCB fixes into the tray using M2.5 inserts glued into the tray.
Fans are 60mm (5v), the cables can be fed through the small gap to keep things tidy.
hardware needed
4x M2.5 copper inserts
2x M5 Fan screw (the bracket is 2 mm so you may need long screws depending on the fan).
2x 60 mm Fan
2x 60 mm Fan shield