Fan Shroud - Monoprice Maker Select (Duplicator 9) mk2

Last crawled date: 4 years, 3 months ago

Originally bought the mk1 machine and later upgraded it with the mk2 upgrade kit.
The fan that came with it was nice but the mount had it pointing at the heater block not the print.
The cooling outlet holes are varied in size to allow a bit of restriction right where the fan is pointing and more open flow on the opposite side to encourage even flow throughout.
This mount allows the fan to be mounted in the front with the bolts that hold the extruder in place.
The heater block must be turned around so that the heater core is in the rear not the front as usual.
This is optimized to be printed at .2mm layers with a .4mm nozzle if using Cura you can use tree supports with only touching build plate. If it tries to add any internal supports use Cura's Support blocking tool around the lower ring to keep the air flow clear.
This has bee working tremendously well and seems to provide even cooling around the print.