Fairphone 3+ Snap Fit Case by s_40

Last crawled date: 3 years, 4 months ago

This Case was designed around the Fairphone 3 modell by Tig3rch3n (https://www.thingiverse.com/thing:3933556).
I wanted a Case that consists of two parts, that fit together so you would neither have to print flexible filament nor print it at a size that the phone will slip around inside the case.
The snap fit was inspired by Malolo´s snap fit Raspberry Pi case (https://www.thingiverse.com/thing:3723561)
You need to print one frame and one lower part. Version one and two have different geometrys in the snap fit. v1 is easy to open, v2 is harder to open.
To assemble the case I recommend to put the phone into the frame, lay both on a flat surface, then push the lower part into the snap fit of the frame.
Edit: uploaded my cura profiles that I use to print PLA snap fit phone cases. They might help as a starting point to get the settings right for your printer and material.