Thingiverse
Fairchild AU23 Peacemaker for microarmor
by Thingiverse
Last crawled date: 5 years, 9 months ago
AU23 Peacemaker gunship based on the Pilatus PC6. The US inventory was eventually sold off to hte Royal Thai Air Force.
Lots and lots of countries used their own variants of the PC6 in their militaries.
A tough one to print because of the small landing gear and wing struts. Be careful with supports. I might redo it with 'solid gear struts to be easier.
model in full dimensions in blender 2.80 and exported from blender 2.79b* at 1/100 for the .stl file
scale down to 35% in the slicer.
I've had issues exporting .stl's from 2.80 for Cura; 2.79b and 2.80 export the same mesh to different file sizes, too. So I export the mesh from 2.79b for consistency's sake.
as usual, the d6 is 15mm for reference
Lots and lots of countries used their own variants of the PC6 in their militaries.
A tough one to print because of the small landing gear and wing struts. Be careful with supports. I might redo it with 'solid gear struts to be easier.
model in full dimensions in blender 2.80 and exported from blender 2.79b* at 1/100 for the .stl file
scale down to 35% in the slicer.
I've had issues exporting .stl's from 2.80 for Cura; 2.79b and 2.80 export the same mesh to different file sizes, too. So I export the mesh from 2.79b for consistency's sake.
as usual, the d6 is 15mm for reference