Thingiverse
Faceshield Kocet (A4 Cover, A6 cutouts) by Slavitom
by Thingiverse
Last crawled date: 5 years, 7 months ago
This faceshield is best printable with 0.5mm layers and a 1mm nozzle. The object is mostly 2 or 4 walls thick with no infill.
Otherise a 0.5mm nozzle is advised should you not have a 1mm within your reach.
Take a cover sheet, and a hole puncher. Set the hole puncher to A6.
Cut the sheet on both sides, to punch 4 holes.
Now you can press the knobs of the printed parts throug the holes and the sheet will hold firmly in place.
Otherise a 0.5mm nozzle is advised should you not have a 1mm within your reach.
Take a cover sheet, and a hole puncher. Set the hole puncher to A6.
Cut the sheet on both sides, to punch 4 holes.
Now you can press the knobs of the printed parts throug the holes and the sheet will hold firmly in place.