FABtotum microbackpanel by Ivmar

...re common 40mm version with higher throughput, so the mount had to be changed. uses 2 plastic screws tapped into the fab housing.

...fabtotum tube holder by ivmar thingiverse fabtotum tube holder for printing head

...fabtotum logo keychain by fabtotum thingiverse the fabtotum logo keychain, easy and fast to print! fabtotum... make more!

...fabtotum m3 tool by fabtotum thingiverse m3 tool used for upgrade the fabtotum hybrid bed to the rev 2.

...cement of the new reed door switch on the fabtotum. check the installation manual here: http://wiki.fabtotum.com/doku.php?id=reed

... can be mounted on the fabtotum and used at the same time with the printing bed. compatible only with the new fabtotum core rev4.

...psu, remove the power cord cable. warning: do not operate or power the machine with the side panel opened, proceed on your risk.

...fabtotum tube holder by ivmar thingiverse fabtotum tube holder for printing head

... 1:10 scale model of fabtotum. designed to be printed using 2 colors, using the fabtotum personal replicator with mosaic palette.

...ing flat disc. the 4th axis chuck can accomodate different material stocks of different shapes for 4 axes machining and scanning.

...hange to make some room for the solder pads on the bottom side of the pcb. so now the pcb will lay more flat against the plastic.

... with the mosaic palette+. check the page here: https://www.fabtotum.com/3d-printers/heads/palette-plus-multicolor-multimaterial/