Extruder Filament guide by 3r4th

...mk8 extruder filament guide by stefanki thingiverse this is a filament guide for the mk8 extruder.

...ilament guide by todd_optional thingiverse this is a wire guide and wire guide with filament guide for 20x40 extruded aluminum.

...mk7 mk8 extruder filament guide by sidney81716 thingiverse filament guide for mk7/mk8 extruder

...filament guide by ombre-gringo thingiverse filament guide for the extruder. it prevents excessive wear of the extruder parts.

...portabee extruder filament guide by tkc_exp thingiverse portabee filament guide

...tock extruder. this guide feeds directly into the stock extruder without the filament dragging on the side of the extruder inlet.

...mm by t0bs thingiverse a filament guide for mk8 extruder in aluminum, allowing for ninjaflex usage without curling the filament.

...x thingiverse a simple filament guide for the lower part of the extruder of the anet a8 to improve the changing of the filament

...giverse to prevent erosion of the extruder plastic part, this filament guide steer the filament more vertically in the extruder.

...anet a8 extruder filament guide by mpkottawa thingiverse made a guide to put filament into an anet a8 boden extruder.

...coupler 5x8mm by 3r4th thingiverse printed with petg and 100% infill. 13.07.17: added a more flexible version.

...h thingiverse i created a adapter plate for the y axis from mgn12c and mgn12h to a hole pattern of the sc8uu. best regards 3r4th

...need per feet: 4* m6 screws for fixture 4 flat nut m6 din 439 1 standart nut m6 1* clamping knob m6x32-34mm 25mm aluminium pipe

...ould be fine. greez 3r4th update: after printing the parts i increased the the hexnutdiameter and the shaft hole for a bettet fit

... the files as you want for no-commercial usage. printed with 100mm/s 3 loops shell (1.2mm) 20% triangle infill best regards 3r4th

...mkantor's a8 bowden extruder mount, but when i printed 3r4th#39;s frame brace, there was no more clearance for the...

...3 loops shell (1.2mm) 20% triangle infill best regards 3r4thquot; please post photo of your print if you are...

...(https://www.thingiverse.com/thing:1624641) and also with the ultimate frame stabilizer by 3r4th (https://www.thingiverse.com/thing:2069466). for both parts recesses available which do not...

... by phobosmoon thingiverse another filament guide, with cap. put some double-sided tape under the guide to fix it on your table.

...needed some single guides also. i found the ikea lack filament guide by karnschi so i added them in to .stl file as well... enjoy

...diabolo guide thingiverse diabolo guide for r6 2011

...rse this filament guide is to be used with the spare roller guide when you replaced the plastic extruder with the aluminum one.

...e (e.g. bowden cable) on your prusa. you can purchase the guide here: http://www.mcmaster.com/#8547k23 i recommend a 2ft length.

...ilament guide by todd_optional thingiverse this is a wire guide and wire guide with filament guide for 20x40 extruded aluminum.

...piece of ptfe tube in (od of ~4.1mm) to guide filament to the direct drive. without it the filament spool was unraveling spaghet.

...ww.thingiverse.com/thing:3184808 to be used with: ender 3 filament guide by mattellisonhttps://www.thingiverse.com/thing:3059604

...guide porte, door guide by vieen3d thingiverse pièce pour guider une porte coulissante

...ntial part. tested using makerbot thing-o-matic using abs plastic. fork it on github: https://github.com/servetus/lowerguide

...extruder thingiverse extruder for 3dprinter

...linear extrude, rotation extrude by jtirado thingiverse linear extrude, rotation extrude

...extruder by brunoschoofs thingiverse extruder

...extruder catcher/extruder holder by verdandi thingiverse for holding extruder. thx for clicking designed on sketch up

...extruder by nekro thingiverse cooler extruder

...extruder by dviktor thingiverse extruder with three fans (1 unmanaged extruder and 2 managed to product) fans 20x20x10

...extruder knob thingiverse yet another extruder knob.

...extruder by imhuman thingiverse my first extruder. my design.

...bmg extruder thingiverse bmg extruder model : step, wrl, stl

...bowden extruder thingiverse i have created bowden extruder for flsun delta 3d printer.

...ent holder for 1,75mm filament by boschlike thingiverse filament holder for 1,75mm filament. mountable on the prusa mk3s+ frame.

...filament holder sunlu filament by trisit thingiverse remix for the sunlu filament rolls.

...filament stand thingiverse basic filament stand for filament coils with bigger diameter.

...filament holder thingiverse this filament stand is to hold the filament without using the as-built location

... clip really easy to print and use. no hole to insert the filament. the filament stay in place because pressed against the spool.

...filament hanger thingiverse hanger for filaments. it helps you organize your filaments and work space.

...filament holder thingiverse filament holder

...filament cradle thingiverse filament cradle

...filament holder (filament spool) by herenkeskin thingiverse this is a filament holder. i printed this part on my tevo tarantula.

...pyramid filament mount with filament sensor by wlbillmartin thingiverse pyramid filament mount with filament sensor (9:30)