External Enclosure for A8 Mainboard and 2x mosfet board by MattKi

Last crawled date: 3 years, 1 month ago

I've created this design using a model created from my project box template file https://www.thingiverse.com/thing:2654676. This model is designed to house the Anet V1.0 mainboard and two fairly standard Mosfet boards and is intended to be fitted to the side of an enclosure. The Mosfet boards should be positioned as pictured.
Features
Top hole for access to Anet V1.0 Board USB Port and Micro SD slot.
Bottom holes for power cables to enter the case. Positioned to line up with the power input on the main board and power inputs on the Mosfets.
Holes in the interior. They are positioned to allow cables to be fed through from the inside of your printer enclosure to the relevant points on the main board.
Mounting posts for the above mentioned boards.
Positions to screw the lid onto the case.
4 M3 holes to mount the box to the side of your enclosure.
The Lid features a position for mounting an 80mm fan above the main board. and slots below to improve airflow.
You will also need:
M3 screws - around 10mm long for the case lid (4) and around 8mm long for mounting the boards (12).
Screws suitable for the fan you wish to mount.
Updates - 18/11/2017
Modified how corners are handled. There was a positional error which manifested as a 0.5mm offset in both horizontal axes for the corner detail. Corners are now positioned correctly and are changed to round the number of edges to a multiple of 4 so that the edges of the corner align with the box edges.
Modified positioning of screw holes for the lid. I believe this now ensures you can access all of the screw holes for securing your boards!
Mirrored relevant changes to the generic project box template.