Thingiverse
Extended Spool Holders for Prusa Lack Enclosure by crowlord
by Thingiverse
Last crawled date: 3 years ago
FINAL NOTE
I found the friction to be too great on this design so have binned it.
You may like to continue with it I am now using https://www.thingiverse.com/thing:629381
I just edited the STL for some screw holes.
The design is up as I hate deleting but I don't recommend using this holder
Tweak 2 (Hopefully final!)
Countersunk screwhole and raised bracket arms to clear fillets from the rollers (was some clashing).
Tweak 1
The pin fits fine and the bracket is fine also. Roller was waaay too tight. New version uploaded with a bigger bore. I imagine the source model will have the same issue.
The original files seemed a bit restrictive to the spool size. They would probably take my 1kilo rolls but my larger rolls had no chance.
I have retweaked the rollers and base to accommodate rolls of 70 - 115 mm in width. While I was there I added some fillets for strength as well.
I will update with performance and whether it's actually any good when I can get a print off and the Lack built. My maths indicate that 3 will still fit on the top.
Until then have a render. If someone beats me to the print be sure to share your experiences so I can tweak.
I found the friction to be too great on this design so have binned it.
You may like to continue with it I am now using https://www.thingiverse.com/thing:629381
I just edited the STL for some screw holes.
The design is up as I hate deleting but I don't recommend using this holder
Tweak 2 (Hopefully final!)
Countersunk screwhole and raised bracket arms to clear fillets from the rollers (was some clashing).
Tweak 1
The pin fits fine and the bracket is fine also. Roller was waaay too tight. New version uploaded with a bigger bore. I imagine the source model will have the same issue.
The original files seemed a bit restrictive to the spool size. They would probably take my 1kilo rolls but my larger rolls had no chance.
I have retweaked the rollers and base to accommodate rolls of 70 - 115 mm in width. While I was there I added some fillets for strength as well.
I will update with performance and whether it's actually any good when I can get a print off and the Lack built. My maths indicate that 3 will still fit on the top.
Until then have a render. If someone beats me to the print be sure to share your experiences so I can tweak.
Similar models
thingiverse
free
Small TUSH 115mm edition (Kodama spool holder) by Francescoto
...
i have left the old files online, as i have not yet printed the new spool holders to see if they can sustain the spool reliably.
thingiverse
free
Filament Spool for Small Filament Amounts by Grim_Havok
...g' back on themselves, so i added some to this design.
this isn't my best print ever, but it was functional so i kept it.
thingiverse
free
Spool Holder Extension for Printrbot Simple Metal Spool Holder by TacosForJesus
...it through the roll and to also make the flat surface of vezkah's design rounded.
this was my very first self-designed print.
thingiverse
free
Spool holder for mp select mini by kirkalaniz
...r. i'll also have other prints for this printer. this spool holder will fit any filament roll with a 50mm hole in the center.
thingiverse
free
Spool Roller
... i didn't already have kicking around; ergo, i designed my own.
parts required to complete:
4 m6 x 16mm screws
4 626 bearings
thingiverse
free
Minimalistic spool holder V2 by reversehaven
...holder doesn't need anything else to work. just print, and use. you need:
2x spool legs
1x h-crossbar
assemble, and have fun!
thingiverse
free
lowered version of Kossel top spool holder by coloursontheinside
...o way to test this on a smaller kossel. therefore please tell me if it works for that one too, so i can update this description.
thingiverse
free
Spool holder bracket for Acrylic i3 type frames by The-3D-Printing-Guy
... i've simply changed the dimensions and added a cutout to allow access to the sd card which was blocked in the source design.
thingiverse
free
Frame Mounted Spool Holder by Joshwright7098
... frame was really tricky (probably my fault). i ended up printing it on a raft and using a lot of support - you have been warned!
thingiverse
free
Revised Spool Holder for Wanhao I3 Mini/Cocoon Model Create
...to fit.
i've printed 3 vases with this part on and i must say the tremors from the spool adjusting on the holder is now gone.
Crowlord
thingiverse
free
Modular Christmas Tree by crowlord
...modular christmas tree by crowlord
thingiverse
a modular christmas tree for sale in my etsy shop.
thingiverse
free
The Coasters of Rassilon by crowlord
...in totally untested so any feedback would be ideal.
i have yet to purchase the printer when i do this will be developed further.
thingiverse
free
The Ring of Rassilon by crowlord
...have now printed this, 0.100 layer height. i laid it down with supports, there is a bit of roughness but my son wont take it off!
thingiverse
free
Cat Toy by crowlord
...iddle, cat fishes them out.
excuse the layer shift on the print, i couldn't be bothered to start again and its a long print!
thingiverse
free
Prusa Lack Enclusure locating cones with full hole by crowlord
...e locating cones with full hole by crowlord
thingiverse
i just punched the holes all the way in f360 not sure why they were not!
thingiverse
free
Lack filament port by crowlord
...en the couplers and you may need to sharpen one end (in a pencil sharpener) so you can feed it through the coupler the wrong way.
thingiverse
free
Tool-less C270/310 enclosure mount by crowlord
...ch webcam. requires removal of guts from camera.
you will need 6no 20x6x1.5 neodymium magnets. they simply slide into the slots.
thingiverse
free
Milk Bottle Lock (UK) FOOD SAFE by crowlord
...t cannot be removed easily once locked down.
the rest of the files are still at the source thing which deserves the credit here.
thingiverse
free
Starfleet Com Badges by crowlord
...get sued.
update
tng and future imperfect badges remeshed for some nasty non manifold errors that some slicers couldnt pin down.
thingiverse
free
MK3 Surround shroud MOD (No supports and visible nozzle) by crowlord
...zles may need a little cooling or bed only support. (in fact i may print mine again with that in mind.)
now to test some bridges.
Lack
3d_export
$5
LACK LACK Coffee table white 90x55 cm IKEA
..., white, 90x55 cm ikea<br>https://www.ikea.com/ru/ru/p/lack-lakk-zhurnalnyy-stol-belyy-50449907/?ysclid=l8zshj49w6656165430
turbosquid
$4
Ikea Lack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
IKEA Lack Coffee Table
... кофейный
ikea lack coffee tablehttp://www.ikea.com/gb/en/catalog/products/00104291
turbosquid
$5
IKEA Lack Table
...ack table for download as blend, blend, unitypackage, and fbx on turbosquid: 3d models for games, architecture, videos. (1623135)
turbosquid
$10
Ikea Lack Set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
IKEA Lack Library
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
IKEA LACK TABLE
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
IKEA Lack Shelf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Ikea Table 5 Lack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
IKEA Lack Side Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Prusa
turbosquid
$2
Frame Filament Guide Clip-On for Prusa Mk3
...rame filament guide clip-on for prusa mk3 for download as stl on turbosquid: 3d models for games, architecture, videos. (1634730)
3d_export
free
prusa i3 mk3s laser mount for opt lasers
...to learn more about the blue laser technology that conceived the cutting and engraving laser heads from opt lasers, please visit:
turbosquid
free
Prusa small printer adapter holder
...er for download as ipt, skp, dwg, dxf, fbx, ige, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1642936)
3d_export
$30
geisha by jonathan adler
...** i did a 3d printing test in the prusa software, you can find it among the attached images.<br>exchange:<br>.blend...
thingiverse
free
Prusa without Prusa (rc2) by madless
...prusa without prusa (rc2) by madless
thingiverse
just the main part of prusa rc2 faceshield, without writing.
enjoy :)
thingiverse
free
Prusa by acejbc
...prusa by acejbc
thingiverse
prusa knob info
m3 8mm screw
thingiverse
free
Prusa house
...prusa house
thingiverse
how prusa house could look like...
thingiverse
free
Prusa Mk2 "Fake Prusa" LCD cover by anraf1001
...r by anraf1001
thingiverse
version of prusa's lcd cover with "fake prusa" instead of "original prusa"
thingiverse
free
Prusa stabilizator by gutiueugen
...prusa stabilizator by gutiueugen
thingiverse
prusa stabilizator
thingiverse
free
Keychain Prusa by rbarbalho
...keychain prusa by rbarbalho
thingiverse
keychain with text prusa.
Extended
turbosquid
$39
Extending table
...id
royalty free 3d model extending table for download as max on turbosquid: 3d models for games, architecture, videos. (1290552)
turbosquid
$5
Extend Table
...squid
royalty free 3d model extend table for download as skp on turbosquid: 3d models for games, architecture, videos. (1372508)
turbosquid
$40
Engine Extended
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Triple extender
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$99
Monica (Extended Pack)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Berlino Extendable Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Extendable Modern Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$32
KC10 Extender 3D Model
...c 10 aircraft jet fighter bomber close support interceptor spy attacker plane
kc10 extender 3d model martialartist 24527 3dexport
3d_export
$50
Extended Range Trailer 3D Model
...railer 3d model
3dexport
extended range trailer military patrol equipment
extended range trailer 3d model dougmavs 75684 3dexport
design_connected
$13
Big Dining Tables Extended
...ining tables extended
designconnected
bonaldo big dining tables extended computer generated 3d model. designed by gilles, alain.
Spool
3ddd
$1
spool c53301
...spool c53301
3ddd
spool
spool c53301 650х350х145
turbosquid
$3
Cable Spool
...royalty free 3d model cable spool for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1457009)
turbosquid
free
Pallets and Spool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Spool of String
...ol of string pink for download as c4d, 3ds, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1647892)
3ddd
$1
Подвесные светильники Spool
...ye/podvesnoy_svetilnik_spool_d320/ http://www.cosmorelax.ru/catalog/podvesnyye/podvesnoy_svetilnik_spool_d420/
3ddd
free
Spool 001 sofa
...spool 001 sofa
3ddd
roda
roda
collection spool
design rodolfo dordoni
dimensions:
lenght 90 cm
depth 94 cm
height 79 cm
turbosquid
$15
Roda Spool Sofa
...ee 3d model roda spool sofa for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1502650)
turbosquid
$95
wire spools 3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
spool of TV wire
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Simple and Fast Spool Holder
...ree 3d model simple and fast spool holder for download as stl on turbosquid: 3d models for games, architecture, videos. (1548546)
Holders
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.