Thingiverse
ExoSlide Bowden E3d V6 and BLTouch Mount V1
by Thingiverse
Last crawled date: 5 years, 4 months ago
Wanted to use a bowden setup and run a BLTouch for the Exocube so I came up with this.
The BLTouch is 20.5mm away from the nozzle and triggers when the nozzle is 1.5mm from the build plate but the z probe offset may vary.
Hardware Needed
x6 M4x12mm Button Head (ExoSlide Mounting)
x7 M3x25mm Socket Head (To connect the two half's and 40x20mm cooling fan mounting)
x2 M3x6mm Socket Head (To secure BLTouch)
x4 M3x16mm Socket Head (40x10mm fan mounting)
x6 M3x12mm Socket Flat Head (To secure cover and cooling duct)
The BLTouch is 20.5mm away from the nozzle and triggers when the nozzle is 1.5mm from the build plate but the z probe offset may vary.
Hardware Needed
x6 M4x12mm Button Head (ExoSlide Mounting)
x7 M3x25mm Socket Head (To connect the two half's and 40x20mm cooling fan mounting)
x2 M3x6mm Socket Head (To secure BLTouch)
x4 M3x16mm Socket Head (40x10mm fan mounting)
x6 M3x12mm Socket Flat Head (To secure cover and cooling duct)