Thingiverse
EVSE WB DIN enclosure by pjanco
by Thingiverse
Last crawled date: 5 years, 8 months ago
I am building EVSE home charger with this controller board:https://www.autonabijeni.cz/evse-komunikacni-jednotky/evse-wallbox-v1-1/
I have free space on my DIN rail only for 1,5 DIN module. So, I create this space efficient DIN holder for PCB.
Printed without suports and with 100% infill, resolution 0,28.
Must be printed from PETG because DIN clip must be elastic.
You have to use 2.5mm drill and M3 tap and make a thread into two holess after print.
I have free space on my DIN rail only for 1,5 DIN module. So, I create this space efficient DIN holder for PCB.
Printed without suports and with 100% infill, resolution 0,28.
Must be printed from PETG because DIN clip must be elastic.
You have to use 2.5mm drill and M3 tap and make a thread into two holess after print.