Thingiverse
evil-rover03 BaneBots P60 Gear Box RC4WD Demolisher by evil_k
by Thingiverse
Last crawled date: 3 years, 1 month ago
Started this by making my own wheels for the RC4WD Demolisher Tires to fit on a BaneBots P60 Gear box. Orange wheels shown in pictures are not the final version - found them to be too wide. Version uploaded a bit narrower.
Gear Boxes: BaneBots P60S-3333-57, P60 Gearbox: Standard, 129:1, For RS-500 or RS-700 Motor
Motors: HobbyKing Turnigy XK3674-1400KV Brushless Inrunner
ESC: HobbyKing 60A ESC 4A UBEC (F-60A) reflashed
Tires: RC4WD Demolisher Monster Truck 40 Series 3.8" (9.6" dia, 5.92" wide)
Used 1.5" x 1/8" aluminum angle for the bottom of the sides (or sides of the bottom!). 1.5" x 1/8" aluminum flat (two pieces) for the rest of the sides. 0.025" aluminum sheet for the bottom plate. The aluminum the motor/gear boxes is bolted to is 2" x 1/16" angle. Have to trim the extra bit above the motor/gear box at the ends so does not hit the wheels.
Wheels secured to the P60 with 1/8" key stock and two 10-32 x 3/4" set screws. Used 5mm cap head screws (16 mm long??) to secure the bead locks to the wheels. Will need to tap the holes first. Since M5 and 10-32 are very close, possible to use either type in either position.
The aluminum square tubing on the bottom side is 3/4". Used to house the motor wires going to the front wheels.
Have included ESC mounts for RoboClaw 2x35A (not shown - motors I had were not powerful enough), so ended up using the brushless ESCs indicated above. Mounting brackets for them included. Need the A and B parts for both sides (B part the same for left and right.)
The Aluminum U shaped channels on the bottom are edging for 1/2" plywood. Have included clips that can secure over the channels to hold items, such as the battery holder. There is an 1/8" gap between the bottom of the channels and the 0.025" aluminum bottom plate to allow the clips to grab around the channels.
The STL plate is the solid green on in the pictures (rear of the vehicle in the pictures.) Front plate in the pictures with the big hole in it was a temporary one to check the fit.
All mounting hardware for the chassis is 5mm cap head bolts.
The motor/gear box combo seems to have lots of power to turn the Demolisher tires. Not a speed machine.
Have included various thickness of motor spacers to go between the motor and the P60 gear box.
No top built yet.
Gear Boxes: BaneBots P60S-3333-57, P60 Gearbox: Standard, 129:1, For RS-500 or RS-700 Motor
Motors: HobbyKing Turnigy XK3674-1400KV Brushless Inrunner
ESC: HobbyKing 60A ESC 4A UBEC (F-60A) reflashed
Tires: RC4WD Demolisher Monster Truck 40 Series 3.8" (9.6" dia, 5.92" wide)
Used 1.5" x 1/8" aluminum angle for the bottom of the sides (or sides of the bottom!). 1.5" x 1/8" aluminum flat (two pieces) for the rest of the sides. 0.025" aluminum sheet for the bottom plate. The aluminum the motor/gear boxes is bolted to is 2" x 1/16" angle. Have to trim the extra bit above the motor/gear box at the ends so does not hit the wheels.
Wheels secured to the P60 with 1/8" key stock and two 10-32 x 3/4" set screws. Used 5mm cap head screws (16 mm long??) to secure the bead locks to the wheels. Will need to tap the holes first. Since M5 and 10-32 are very close, possible to use either type in either position.
The aluminum square tubing on the bottom side is 3/4". Used to house the motor wires going to the front wheels.
Have included ESC mounts for RoboClaw 2x35A (not shown - motors I had were not powerful enough), so ended up using the brushless ESCs indicated above. Mounting brackets for them included. Need the A and B parts for both sides (B part the same for left and right.)
The Aluminum U shaped channels on the bottom are edging for 1/2" plywood. Have included clips that can secure over the channels to hold items, such as the battery holder. There is an 1/8" gap between the bottom of the channels and the 0.025" aluminum bottom plate to allow the clips to grab around the channels.
The STL plate is the solid green on in the pictures (rear of the vehicle in the pictures.) Front plate in the pictures with the big hole in it was a temporary one to check the fit.
All mounting hardware for the chassis is 5mm cap head bolts.
The motor/gear box combo seems to have lots of power to turn the Demolisher tires. Not a speed machine.
Have included various thickness of motor spacers to go between the motor and the P60 gear box.
No top built yet.
Similar models
thingiverse
free
BaneBots P60 Gearbox 1/5 Maxstone Crawler Wheels evil-rover02 by evil_k
...x30a roboclaw motor controller. have not done anything for a top cover yet.
uploaded the correct motor/gear box support brackets.
thingiverse
free
evil-rover02 BaneBots P60 Gear Box Pro-Line Badlands MX43 by evil_k
...l (even less on the inside), so the tires will offer minimal shock absorbing capabilities compared to the maxstone crawler tires.
grabcad
free
Hobbyking 60A ESC
...hobbyking 60a esc
grabcad
hobbyking 60asbec esc
lipo: 2-4s
driver for bldc motors
grabcad
free
ESC FLAME 60A HV
...esc flame 60a hv
grabcad
t-motors brushless motor esc
grabcad
free
Banebots P60
...banebots p60
grabcad
banebots p60 4-stage gearbox: standard, 528:1, for rs-500 motor
grabcad
free
Banebot 1 3/8" wheel
...banebot 1 3/8" wheel
grabcad
banebot 1 3/8" wheel
grabcad
free
BaneBots Wheel
...banebots wheel
grabcad
banebots wheel 1-3/8", 1-5/8", 1-7/8" and 2-3/8"
3dwarehouse
free
Banebots 16:1 P60 (18v 775)
...s 16:1 p60 (18v 775)
3dwarehouse
cad model of the banebots 16:1 p60 gearbox with an 18v 775 motor fitted. gearbox made by ellis.
3dwarehouse
free
Banebots 16:1 P60 (12v 775)
...ts 16:1 p60 (12v 775)
3dwarehouse
cad model of the banebots 16:1 p60 gearbox with a 12v 775 motor fitted. gearbox made by ellis.
3dwarehouse
free
Silver Spark motor with banebot 1 3/8 orange wheel
...silver spark motor with banebot 1 3/8 orange wheel
3dwarehouse
silver spark motor with banebot 1 3/8 orange wheel and hub
Banebots
thingiverse
free
Banebot motor cap by cheverus5265
... needed to mount our banebot motor in an exposed area of the robot and designed a cap that will cover the electronic connections.
thingiverse
free
Banebots P60K Shaft to 3/5" Adapter by Wiifi
... are using it to adapt our banebots gearbox shaft to pvc fitting.
updated with v2 to fit our bolts.
created by frc team #2470
thingiverse
free
BaneBots P60 Gearbox to Tetrix for FTC NeveRest by LectricLegends8417
...x. we are using this with our shooter motors, which are bare neverest motors attached to the 4:1 gearbox.
cheers from team 8417!
thingiverse
free
FRC Andymark / Banebots Motor Hub and Shaft Adapter by portalengineer
...dymark or banebots motors. the hub fits into most andymark wheels and the shaft adapter fits into a standard 0.5" keyed hub.
thingiverse
free
Banebots 16 mm spur gearmotor bracket by sistemasorp
...6mm spur gearmotors. so i designed a robust one that fits in ff-030 and ff-050 series. the holes are for 3mm nuts and bolts (m3).
thingiverse
free
Banebot Wheel Hex Hub by kittka
...ct for easily making 4 wheel drive systems from two motors!
for the setscrew, you will need to tap the side hole with a 6-32 tap.
3dcadbrowser
free
Banebots Transmission 3D CAD ModelFree
...3d object can be downloaded in .step, .iges, .max, .obj, .3ds, .fbx, .dxf, .lwo, .stl, .wrl, .ma, .dae, .x and .asc file formats.
thingiverse
free
evil-rover02 BaneBots P60 Gear Box Pro-Line Badlands MX43 by evil_k
...l (even less on the inside), so the tires will offer minimal shock absorbing capabilities compared to the maxstone crawler tires.
thingiverse
free
Frc Bearing Block by Dominickferone
...bearing block by dominickferone thingiverse a modification to the banebots bearing block made slightly wide and taller to help...
P60
3ddd
$1
Leucos - Dracena P60
...leucos - dracena p60
3ddd
leucos , dracena
leucos - dracena p60
60x30 h56
3ddd
free
Камера Cisco CTS-CAM-P60
...m-p60
3ddd
вэб-камера , cisco
камера cisco telepresence precision 60 camera cts-cam-p60.
3d_sky
free
Leucos - Dracena P60
...leucos - dracena p60
3dsky
leucos dracena
leucos - dracena p60 60x30 h56
3dfindit
free
NFM6-P60
...nfm6-p60
3dfind.it
catalog: yuki giken
3d_sky
free
Camera Cisco CTS-CAM-P60
...camera cisco cts-cam-p60
3dsky
web camera cisco
cisco telepresence precision camera 60 camera cts-cam-p60.
3dfindit
free
P60 Q Plate FPR GFCI Device
...p60 q plate fpr gfci device
3dfind.it
catalog: abb installation products
thingiverse
free
P60 drop-in mount for quadcopter. by Sneezy3D
...t's power to reduce heat, or make a diy heat sink that presses into the back of the brass pill.
the driver is now external...
thingiverse
free
T-Motor Pacer P60 4-in-1 ESC DUMMY by tomtomtomtomtomtomtomtomtomtomto
...omtomtomtomtomtomtomto
thingiverse
t-motor pacer p60 4-in-1 esc dummy in .stl for printing and .stp for creating someting new :)
thingiverse
free
BaneBots P60 Gearbox to Tetrix for FTC NeveRest by LectricLegends8417
...x. we are using this with our shooter motors, which are bare neverest motors attached to the 4:1 gearbox.
cheers from team 8417!
thingiverse
free
P60 Punisher Handgun (Mutant Chronicles RPG)
...lug for those who wants to color it bright orange and have it as a safety for walking the floor at cons and such.
hope you enjoy!
Rc4Wd
turbosquid
$2
RC4wd Intermediate bearing
... free 3d model rc4wd intermediate bearing for download as stl on turbosquid: 3d models for games, architecture, videos. (1198938)
turbosquid
$3
RC4WD gelande battery support
...ee 3d model rc4wd gelande battery support for download as stl on turbosquid: 3d models for games, architecture, videos. (1198928)
thingiverse
free
rc4wd chassis by rich11
...rc4wd chassis by rich11
thingiverse
rc4wd chassis
thingiverse
free
rc4wd tf2 camper by bkrcmetalworks
...etalworks
thingiverse
will all snap together to fit a rc4wd tf2 body i included a solid floor for those with big enough printers
thingiverse
free
RC4WD Mojave / HiLux Bumper Rear by NoMor77
...rc4wd mojave / hilux bumper rear by nomor77
thingiverse
rc4wd mojave / hilux 2door/4door rear bumper
thingiverse
free
RC4WD Mojave / HiLux Bumper Froint by NoMor77
...rc4wd mojave / hilux bumper froint by nomor77
thingiverse
rc4wd mojave / hilux 2door / 4door frontbumper clean version
thingiverse
free
RC4WD snow plow base protection by bolbot
...rc4wd snow plow base protection by bolbot
thingiverse
rc4wd snow plow plastic base
https://www.youtube.com/watch?v=2lhptzvj1z8
thingiverse
free
RC4WD Gelände II D90 Snorkel by powerbynowak
...rc4wd gelände ii d90 snorkel by powerbynowak
thingiverse
did a snorkel for the d90 body from rc4wd. perfect fit! also fits d110.
thingiverse
free
RC4WD earth digger 4200xl sand bucket
...er 4200xl sand bucket
thingiverse
rc4wd earth digger 4200xl sand bucket
must be re drilled at 6mm and adjusted with some washers
thingiverse
free
RC4WD Overland 4x4 Camper Build by Schakka505
...ka505
thingiverse
a custom 3d printed camper build for the rc4wd overland 4x4 or even know as mercedes zetros as fullsize truck.
Demolisher
3d_export
$20
Demolisher 3D Model
...demolisher 3d model
3dexport
demolisher transformer robot car devastator
demolisher 3d model oo 27127 3dexport
turbosquid
$15
Demolisher mecha
...quid
royalty free 3d model demolisher mecha for download as on turbosquid: 3d models for games, architecture, videos. (1606432)
turbosquid
$15
demolished gas station set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$20
Demolisher3d model
...ormer robot car devastator
.3ds .max .obj - demolisher 3d model, royalty free license available, instant download after purchase.
3d_ocean
$6
Burnt Building
...
3docean
building burnt
burnt building, burned building, environment, old, dark, rough, hard edge, demolished, destroyed, haunted
3d_export
$59
Rayfire plugins fragmention wall on car 3D Model
...eck break down wreak havoc blow up burst detonate
rayfire plugins fragmention wall on car 3d model rahman.najafian 87890 3dexport
3d_ocean
$5
Falling Glass Animation
...sequence is suitable for element 3d in after effects. see more images for detailes. available formats • 3ds max 2010, 2013 (vr...
cg_studio
$39
Broken wall module3d model
...medieval
.obj .max .fbx .c4d .3ds - broken wall module 3d model, royalty free license available, instant download after purchase.
3d_ocean
$1
Cracked Glass Seamless Pattern
...rent window
gray cracked glass seamless pattern tiling texture • 1024×1024 pix texture • .jpg and flat .png file • tiling texture
3d_export
$45
the marchiondi spagliardi institute by vittoriano vigano
...iondi spagliardi.<br>style: breton brute, brutalism<br>model 3d, original file rhino 6 exportation : obj, fbx and stl
Evil
3d_export
$5
Evil yoda
...evil yoda
3dexport
evil yoda<br>stl
3d_export
$10
EVIL 3D Model
...evil 3d model
3dexport
evil dagger edge skull
evil 3d model evil 13163 3dexport
3d_export
$5
Evil Skeleton
...evil skeleton
3dexport
evil skeleton model rigged with texture map included working on maya
3d_export
$5
doofenshmirtz evil inc
...doofenshmirtz evil inc
3dexport
doofenshmirtz evil inc
3d_export
$5
Evil eye
...e-playing game of the forgotten realms and greyhawk universe; they were later transferred to a number of other fantasy universes.
turbosquid
$30
Evil knight
...urbosquid
royalty free 3d model evil knight for download as on turbosquid: 3d models for games, architecture, videos. (1595171)
turbosquid
$2
Evil Goblin
...urbosquid
royalty free 3d model evil goblin for download as on turbosquid: 3d models for games, architecture, videos. (1466495)
turbosquid
$4
Evil Candle
...y free 3d model evil candle for download as dds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1545230)
turbosquid
$3
Evil rabbit
...y free 3d model evil rabbit for download as c4d, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1704687)
3d_ocean
$8
Evil Brain
...gue
this is a 3d model (low poly) “evil brain”. triangles: 1188. diffuse texture (hand painted): 1024×1024.tga. formats: mb, obj.
K
turbosquid
$1
Swedish-K / K-Pist
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
K lamp
...k lamp
3ddd
k lamp
3ddd
free
Giano K
...giano k
3ddd
стеллаж
книжные полки giano k
3ddd
$1
K-table
...k-table
3ddd
henge furniture , письменный
k-table by henge furnitures
design_connected
$13
Thin-K
...thin-k
designconnected
kristalia thin-k computer generated 3d model. designed by bertoncini, luciano.
design_connected
$9
Miss K
...miss k
designconnected
flos miss k table lights computer generated 3d model. designed by philippe cramer.
3ddd
$1
Papatya / Ego-K
...papatya / ego-k
3ddd
papatya
papatya / ego-k
3ddd
$1
DeMajo 2612/K
...demajo 2612/k
3ddd
demajo
люстра demajo 2612/k
turbosquid
$14
Fence K
...turbosquid
royalty free 3d model fence k for download as fbx on turbosquid: 3d models for games, architecture, videos. (1314643)
turbosquid
$7
K for Key
...rbosquid
royalty free 3d model k for key for download as max on turbosquid: 3d models for games, architecture, videos. (1689776)
Gear
3d_ocean
$4
Gears
...gears
3docean
gear gears iron
4 different size of gears
3d_export
$5
gear
...gear
3dexport
gear
3d_export
free
Gears
...gears
3dexport
gears
3d_export
$5
gear
...gear
3dexport
a simple model of gear
3d_export
$5
gear
...gear
3dexport
gear for transmission , case machine
3d_ocean
$3
Gears
...nical parts process steampunk vehicle wheel work
10 different gear models volume 01-10 files: .3ds .c4d .obj note: you need vray
3d_ocean
$1
Spur Gear
...spur gear
3docean
decoration gear
a typical spur gear
3d_ocean
$4
Gear wheels
...gear wheels
3docean
engine engineering gear gears industry machinery mechanical toothwheel wheel
pair of gear wheels : animated.
turbosquid
$9
Gear
...gear
turbosquid
royalty free 3d model gear for download as on turbosquid: 3d models for games, architecture, videos. (1712328)
turbosquid
$2
Gears
...rs
turbosquid
royalty free 3d model gears for download as ma on turbosquid: 3d models for games, architecture, videos. (1166710)
Box
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
carton cardboard box box
box 1 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$6
box
...box
3dexport
box
3d_export
$5
Box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
archibase_planet
free
Box
...box
archibase planet
box box for paper notebook pencil
box - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n170111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n050411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Boxes
...boxes
archibase planet
boxes box case bin
boxes n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.