Thingiverse
EUC stand 2.0 Stack them by EUCGUY
by Thingiverse
Last crawled date: 5 years, 3 months ago
Still working on it. ill update here later.
Update 03.12.2017: The space inbetween the 20mm pvc tubes are plenty for a Msuper v3.
Soo, someone wanted me to create this and so i did. should be easy to print and put together.
Use M7 screws washers and nuts.
20mm Stiff pvc tube. [▼cut into the length you need]
Epoxy glue is reccomended to fuse the parts at the top because of the added stress.
Update 03.12.2017: The space inbetween the 20mm pvc tubes are plenty for a Msuper v3.
Soo, someone wanted me to create this and so i did. should be easy to print and put together.
Use M7 screws washers and nuts.
20mm Stiff pvc tube. [▼cut into the length you need]
Epoxy glue is reccomended to fuse the parts at the top because of the added stress.