Thingiverse
ETC Nomad USB Key Housing (Green) by PaulTKennedy
by Thingiverse
Last crawled date: 4 years, 10 months ago
This is a printable housing for use with an ETCnomad USB key* and Switchcraft EH Series USB Type-B to USB Type-A Feed-Through Connector.**
The ETCnomad USB key is extremely tiny, and even with the serial tag and usb drive attached, it can be easily misplaced—give it a housing and not only is it easier to keep track of, you also protect its' USB plug from wear and tear!
There is a loop on the bottom which can be used to attach the serial tag and usb drive.
The USB connecter is attached to the housing with M3 screws—no need to use a tap.
There are four files to chose from:
—Blank
—ETCnomad Logo Only
—ETCnomad Logo, on front; BASE (1024) on back
—ETCnomad Logo on front; UNLOCKED (6144) on back
*Sentinel HL dongle only, this will not work the the purple "Client" dongles. If you have a purple dongle use this remix: https://www.thingiverse.com/thing:4592421
**This is the USB connector I had on hand and the only one it has been tested with. I imagine it will work with other D mount USB connectors, such as those by Neutrik, but proceed with caution, the internal depth clearance is 53mm.
A special thanks to Harrison Freni, whose nomad key housing using Neutrik parts inspired this design.
Remix it here: https://www.tinkercad.com/things/lKcjWaymQb7
The ETCnomad USB key is extremely tiny, and even with the serial tag and usb drive attached, it can be easily misplaced—give it a housing and not only is it easier to keep track of, you also protect its' USB plug from wear and tear!
There is a loop on the bottom which can be used to attach the serial tag and usb drive.
The USB connecter is attached to the housing with M3 screws—no need to use a tap.
There are four files to chose from:
—Blank
—ETCnomad Logo Only
—ETCnomad Logo, on front; BASE (1024) on back
—ETCnomad Logo on front; UNLOCKED (6144) on back
*Sentinel HL dongle only, this will not work the the purple "Client" dongles. If you have a purple dongle use this remix: https://www.thingiverse.com/thing:4592421
**This is the USB connector I had on hand and the only one it has been tested with. I imagine it will work with other D mount USB connectors, such as those by Neutrik, but proceed with caution, the internal depth clearance is 53mm.
A special thanks to Harrison Freni, whose nomad key housing using Neutrik parts inspired this design.
Remix it here: https://www.tinkercad.com/things/lKcjWaymQb7