Thingiverse
E.T.C. External (Electric/Ultrasonic) -Toothbrush Clamp by mat_neu27
by Thingiverse
Last crawled date: 4 years, 3 months ago
to store the toothbrushes not in the charger daily, every family member has balanced the brush on the edge of the washbowl. So they dropped or slipped in the bowl or in the worst case on the floor from time to time. Also i figured out that the brush soaks with the years water in, when placed in it' s own puddle on a flat surface. As the result the electronics inside went dead.
So i' ve made these clamps to fix the brushes on the glass shelf and store them room saving and tilt save. Also the water can drop off.
The clamp is made for an IKEA bathroom glass-shelf which is ~ 7,5 mm thick. Feel free to edit the attached FreeCad file to your needs.
The ring fits to (our) brush with the largest diameter and the pin to those with the smallest hole. So every brush fits in every holder.
The clamp is split in two parts for easy printing and the choice of different colors between ring and the clamp.
Edit 28.Sept.2014 : follow up submitted :http://www.thingiverse.com/thing:479982
So i' ve made these clamps to fix the brushes on the glass shelf and store them room saving and tilt save. Also the water can drop off.
The clamp is made for an IKEA bathroom glass-shelf which is ~ 7,5 mm thick. Feel free to edit the attached FreeCad file to your needs.
The ring fits to (our) brush with the largest diameter and the pin to those with the smallest hole. So every brush fits in every holder.
The clamp is split in two parts for easy printing and the choice of different colors between ring and the clamp.
Edit 28.Sept.2014 : follow up submitted :http://www.thingiverse.com/thing:479982