Thingiverse
esp32cam USB case by AMusician
by Thingiverse
Last crawled date: 5 years, 8 months ago
This is a small box for an esp 32 cam, You can put it on a power bank to surveil your 3d printer.
The USB plug is soldered to the 5V and ground on the esp.
I would recommend putting some glue (at least for the camera) so that the esp doesn't move around
The Arduino sketch for this is the default "CameraWebServer.ino" from the sketch examples.
This design is also available on my tinkercad here:https://www.tinkercad.com/things/60ILdgKPHxh https://www.tinkercad.com/things/iDrwzMcIjz2
If you have any questions, post them in the comments section.
The USB plug is soldered to the 5V and ground on the esp.
I would recommend putting some glue (at least for the camera) so that the esp doesn't move around
The Arduino sketch for this is the default "CameraWebServer.ino" from the sketch examples.
This design is also available on my tinkercad here:https://www.tinkercad.com/things/60ILdgKPHxh https://www.tinkercad.com/things/iDrwzMcIjz2
If you have any questions, post them in the comments section.