Thingiverse
ESP 8266 mounting plate
by Thingiverse
Last crawled date: 5 years, 4 months ago
This is a small baseplate for using an ESP8266 together with a single screw
sensor such as for Weatherstations, measuring current / voltage and so on.
The inner diameter of the screwholes is 1.8 mm. Any wood screw around 2 mm in
diameter with a length up to 12 or 15 mm should work fine. I have used Spax 2x12 screws with a PZ1 head. The four mounting post fit an ESP 8266 as well as those base adapters with voltage regulator and pin-outs (see pictures).
I printed the complete base plate with 100% infill which might be a bit overkill but worked fine.
OpenSCAD file is included. So feel free to add mounting posts as needed.
sensor such as for Weatherstations, measuring current / voltage and so on.
The inner diameter of the screwholes is 1.8 mm. Any wood screw around 2 mm in
diameter with a length up to 12 or 15 mm should work fine. I have used Spax 2x12 screws with a PZ1 head. The four mounting post fit an ESP 8266 as well as those base adapters with voltage regulator and pin-outs (see pictures).
I printed the complete base plate with 100% infill which might be a bit overkill but worked fine.
OpenSCAD file is included. So feel free to add mounting posts as needed.