Thingiverse
Eryone Thinker S / SE / ER-20 Hotend Fix by rmsilver7
by Thingiverse
Last crawled date: 4 years, 1 month ago
There is no difference between this remix and the original one from Madizmo, I just wanted to update it with a few tidbits.
This is for ALL Eryone 3D printers (Thinker S, Thinker SE and ER-20) as they all use the same stock hotend.
You do not need to print the part for cutting the tube unless you'd like to. You can use callipers to cut a piece of PTFE tubing to 36mm.
You do not need to print the washer unless you'd like to. You can use an M2 washer on top of the cut piece of PTFE that is down the throat.
Original: https://www.thingiverse.com/thing:4225100
This is for ALL Eryone 3D printers (Thinker S, Thinker SE and ER-20) as they all use the same stock hotend.
You do not need to print the part for cutting the tube unless you'd like to. You can use callipers to cut a piece of PTFE tubing to 36mm.
You do not need to print the washer unless you'd like to. You can use an M2 washer on top of the cut piece of PTFE that is down the throat.
Original: https://www.thingiverse.com/thing:4225100