Eryone Mosquito Mount and Fan Duct - Thinker S, Thinker SE, ER-20 by eight_heads

Last crawled date: 4 years ago

Here is my Mosquito style hotend modular mount and fan duct design for the Eryone Thinker S, Thinker SE, and ER-20 printers. I recommend printing with PETG or ABS for flexibility and heat resistance.
To assemble:
Mount the Mosquito hotend to the mount by inserting the heatsink fan into mount, then hotend, then bolt through the front of the mount to the hotend using the2-M2.5x20mm bolts. This will sandwich the heatsink fan between the Mosquito and the mount.
Insert 2-M2.5x10mm bolt from inside the Mosquito up through the mount to the Mosquito bowden adapter.
Attach mount to Eryone carriage using the 2-M3x5mm bolts
Attach fan duct to fan mount with 1-M3x8-10mm bolt and M3 Nyloc nut.
Attach fan to fan mount with 1-M3x20mm bolt and M3 Nyloc nut
Clip fan mount/duct to Moquito mount by lining up the bottom notch and clipping into the top
Hardware Needed:
2@ M3 x 5mm Mosquito Mount to Eryone Carriage
1@ M3 x 8mm Fan Duct to Fan Mount
1@ M3 x 20mm Fan to Fan Mount
2@ M3 Nyloc Nut
2@ M2.5 x ~20mm Mosquito Mount through Heatsink Fan to Mosquito(front)
2@ M2.5 x ~10mm Mosquito to Mosquito Bowden Connector/Adapter