Thingiverse
Eric's Improved Z Axis Coupler Rev3 by PharaohABQ
by Thingiverse
Last crawled date: 3 years ago
**1/30/2021: Updated to support a 1/4" threaded rod. I haven't been printing a lot lately, but I had need for one of these. These should work for Prusa remixes. Good luck and I hope you find these useful. Created in Creo Elements.
**5/19/2015 Updated EricCouplerRev3-5x5mm.stl for 5mm motor & 5mm threaded rod, M5 nut dimensions estimated. This should work for i3 machines and any other fine 5mm rods. let me know if the nut needs to be modified.
11/4/2013 v4.2, 6mm: Beveled the unsupported edge for the 6mm nut, Beveled the m3 Nylock grub screw hole and narrowed it .2mm, for a tighter fit. Please let me know if you need any other mods.
9/1/2013 modded v4 ->4.1: 6mm version for better 6mm nut fit and widened grub for a nylock nut. removed opposing grub and widened body to 22mm
8/26/13 Added 6mm and 8mm versions Bridged with a second opposite grub on the 5mm motor shaft.
Coupler for Z Axis, Revision 3: Beefed up a little. Created in PTC Creo
**5/19/2015 Updated EricCouplerRev3-5x5mm.stl for 5mm motor & 5mm threaded rod, M5 nut dimensions estimated. This should work for i3 machines and any other fine 5mm rods. let me know if the nut needs to be modified.
11/4/2013 v4.2, 6mm: Beveled the unsupported edge for the 6mm nut, Beveled the m3 Nylock grub screw hole and narrowed it .2mm, for a tighter fit. Please let me know if you need any other mods.
9/1/2013 modded v4 ->4.1: 6mm version for better 6mm nut fit and widened grub for a nylock nut. removed opposing grub and widened body to 22mm
8/26/13 Added 6mm and 8mm versions Bridged with a second opposite grub on the 5mm motor shaft.
Coupler for Z Axis, Revision 3: Beefed up a little. Created in PTC Creo
Similar models
thingiverse
free
5mm to 8mm Z axis shaft coupler by mrice
...ible shaft couplers on z axis rods, for 5mm motor shafts and 8mm threaded rods. use two m3x10mm screws and nuts to tighten down.
thingiverse
free
Z Axis Coupler 5mm to 6mm and 6mm to 6mm by g8y3e
...m to 6mm and 6mm to 6mm by g8y3e
thingiverse
designed for:
5mm motor shaft and 6mm acme rod.
6mm motor shaft and 6mm acme rod.
thingiverse
free
Z motor Coupler A8 by thxraph
...o hammer it in place, make sure your printer can print somewhat decently.
i hope it helps, let me know if it fixed your z-wobble!
thingiverse
free
z axis motor connector prusa i3 by marcomx
...rse
motor connector for z axis, for a 5mm or 6mm thread rod
fits m5 thread
any tips will be much appreciated, but not necesary,
thingiverse
free
power transfer coupler v6 by nottmgage
... coupler from 6mm motor shaft to 8mm threaded rod specifically meant for z axis attachment holes fit bolts up to 5mm in diameter.
thingiverse
free
Parametric Z Axis Coupler for 5mm to 8mm (M4 Bolts and Nuts) by Milogom
...to make one with m4 bolts and nuts. for me is perfectly stable, bolts suits perfectly even without nuts (use m4x12 bolts).
enjoy.
thingiverse
free
Simple Z axis Couplers by FablabMoebius
...tl.
[update 03/09/15] : fixed the screw axis closer to the body for a stronger grip on motor shaft & acme rod (all versions).
thingiverse
free
Prusa i3 Z-axis Coupler by rj_168
...od and stepper motor
5mm to 5mm coupler
3mm bolts used
try not to over tighten or it may split
has worked very well on my printer
thingiverse
free
Z-Coupler with grip
...m threaded rod aswell the possibility to insert a nut at the top end that can be thightend with an additional nut to fix the nut.
thingiverse
free
Parametric Z-axis coupler (stepper and threaded rod coupling) by aspesilorenzo
... / threaded rod coupler.
variable names should be self-explanatory, the default values are meant for a nema17 motor and a m8 rod.
Pharaohabq
thingiverse
free
4mm T5 belt pully by PharaohABQ
...t gear for 4mm shaft steppers. please let me know how it fits your motors. i've only printed it on my prusa which may vary.
thingiverse
free
Eric's Wade's Collaborative Dual Feed Extruder by PharaohABQ
...tive extruder because so many people have added so many great things to the wades, without all of you this would not be possible.
thingiverse
free
Blown Wades Nozzle by PharaohABQ
...d .pk2 formats so that you may create your own nozzles to fit your purpose.
created in ptc creo elements (free) .pk2 file editor
thingiverse
free
BudaSchnozzle Blown Wades X-Carriage, Extruder and Mount. by PharaohABQ
...aschnozzle, i can't test this. these are set for 1.75mm filament, larger can be used if you drill out the filament path hole.
thingiverse
free
Wades Extruder gets Blown by PharaohABQ
...solator with either laser, or hand tools. i find home depot paint sticks work well. i did not design the gears nor the guidler.
thingiverse
free
Modded X carriage for Wades Blower Extruder by PharaohABQ
...base.stl) so that you can create nozzles yourself too.
this was ported to ptc creo elements (free) and corrected in many areas.
thingiverse
free
Blown Wades Extruder v2.4 by PharaohABQ
... either laser, or hand tools. i find home depot paint sticks work well. i did not design the herringbone
gears nor the guidler.
thingiverse
free
Eric's Improved Z Axis Coupler by PharaohABQ
... is my first posted thing, so comments are certainly welcome. i design objects with ptc creo. it's awesome. elements is free.
thingiverse
free
Greg's Wade reloaded - Guidler, Tilt Screws, Fishbone Gears by jonaskuehling
...stl for 4.2mm center hole diameter as requested by pharaohabq in the comments update 2012-03-26: added new parameter "less_idler_bolt_dist"...
Rev3
3d_export
$60
Arduino Uno Rev3 Microcontroller 3D Model
...mega328p circuit board spark cable wire 5v 74v 9v 111v
arduino uno rev3 microcontroller 3d model danielgarnier4403 97237 3dexport
thingiverse
free
Preonic Lid Rev3
...preonic lid rev3
thingiverse
lid i designed for throwing my preonic keyboard in my bag for work.
thingiverse
free
Wobbler Knob rev3 by RobinBa
...wobbler knob rev3 by robinba
thingiverse
a knob for a joystick, with space inside for sensors.
thingiverse
free
Arduino UNO rev3 case - Heavy Bumper by doppiozero
...arduino uno rev3 case - heavy bumper by doppiozero
thingiverse
arduino uno rev3 - heavy bumper
m3x6 screws
thingiverse
free
Arduino Uno Rev3 case by Tamadite
...only three screws are used because there is no space left to accommodate the countersink between the pin slot and the screw hole.
thingiverse
free
BOX for Arduino Mega 2560 rev3 by protoidea
.... you may need to modify the upper part for the specific needs of your project...
you may want to use 4 small screws to close it.
thingiverse
free
Arduino Uno Rev3 Mount by estancil
...arduino uno rev3 mount by estancil
thingiverse
this is a mount for an arduino uno. i needed one for a project i was working on.
thingiverse
free
Lets Split Case rev3 by mtdjr
...lets split case rev3 by mtdjr
thingiverse
lets split case modeled after the tada68 case. work in progress, havent printed yet.
thingiverse
free
Arduino Uno Rev3 with Ethernet Shield case by Tamadite
...only three screws are used because there is no space left to accommodate the countersink between the pin slot and the screw hole.
thingiverse
free
3FPD-Replicator 2X - Extruder Upgrade - REV3 by 3FPD
...rbot.com)
-can be pre-assembled for quick swap (under 2 minutes each)
-l and r extruder parts included, and labelled (common pin)
Eric
design_connected
$18
Eric
...eric
designconnected
bright chair eric chairs computer generated 3d model. designed by n/a.
design_connected
$9
Eric
...eric
designconnected
ligne roset eric computer generated 3d model. designed by ligne roset.
design_connected
free
Eric Mirror
...eric mirror
designconnected
free 3d model of eric mirror by alberta
3ddd
free
Eric Kuster Delano
... bink , delano
диван delano дизайнера eric kuster
3ddd
$1
Eric Chair - Camerich
...eric chair - camerich
3ddd
eric chair - camerich
design_connected
$13
Eric Schmitt Table
...eric schmitt table
designconnected
ralph pucci eric schmitt table computer generated 3d model. designed by schmitt, eric.
turbosquid
$25
Eric Cartman
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Eric Cartman
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
ERIC TRINE CHAIR
...trine
eric trine chair
material - leather/metal
color - black/biege
size - 105 - 113 -90 cm
polys - 77 840
удачного пользования!
3ddd
$1
Кресло сигарное Eric
...изводитель мне неизвестен (снято с производства)
очень много поликов. складки сделаны в zbrush.
внутри текстуры, obj и max файлы.
Coupler
turbosquid
$5
Jet ski coupler
...ee 3d model jet ski coupler for download as 3ds, 3dm, and stl on turbosquid: 3d models for games, architecture, videos. (1190218)
3d_export
$25
Scaffold 3D Model
...scaffolding modular aluminium ladder work platform building painting tube coupler construction max game low poly detailed uv scaffold 3d...
cg_studio
$29
Scaffold3d model
...scaffolding modular aluminium ladder work platform building painting tube coupler construction max game low poly detailed uv .obj .max...
3d_ocean
$25
PC Case
...3d audio blu-ray button card case cd computer conector coupler detailed dvd dvi electronics fan hd hdmi internet microphone...
3d_export
$199
AS15 - Mini Skid Steer - Loader Bucket
...arm<br>loader bucket<br>main body - a<br>main body - b<br>plastic parts<br>quick couplerlt;br>rear tire - left<br>rear tire - right<br>rear wheel - left<br>rear...
thingiverse
free
coupler by Curiositie
...coupler by curiositie
thingiverse
picatinny coupler
thingiverse
free
coupler by ratpog
...coupler by ratpog
thingiverse
coupler-comment for dimensions
thingiverse
free
Coupler by alexander111
...coupler by alexander111
thingiverse
two sided heavy duty coupler
thingiverse
free
Coupler by RoboticArts
...coupler by roboticarts
thingiverse
coupler of the robot made by robotic arts.
3dfindit
free
Coupler
...coupler
3dfind.it
catalog: abb installation products
Axis
3ddd
$1
Мария Axis
...
3ddd
кухня , классическая , axis
модель кухни.
3d_export
$22
Axis robot 6-axis robotic arm
...ing parts drawings, standard parts purchased parts list, can be produced directly according to the drawings, welcome to download!
3ddd
free
Versatile Axis
...ddd
nexus , плитка
http://bvtileandstone.com/ceramic-porcelain/versatile-axis/
3d_export
$19
robot 2 axis
...robot 2 axis
3dexport
robot 2 axis
turbosquid
$40
Axis R5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Axis S5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Axis Athlon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Linear Axis
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
drawing axis
...drawing axis
3dexport
simple rendering of the scene file
3ddd
$1
versatile axis ARC
...versatile axis arc
3ddd
versatile , плитка
versatile axis arc red dot design award
Improved
cg_studio
$49
Robot Z300 (improved version)3d model
...o
.3ds .fbx .max .obj - robot z300 (improved version) 3d model, royalty free license available, instant download after purchase.
3d_export
$39
Robot Z300 improved version 3D Model
...fantasy sci-fi robots bot humanoid droid sci fi materials character
robot z300 improved version 3d model alekrazum 55067 3dexport
3d_export
$75
CV-90 Improved
...nnon. export versions are fitted with hägglunds e-series turrets, armed with either a 30 mm mk44 or a 35 mm bushmaster autocannon
turbosquid
$55
(Important textures coming back soon after improvements)Cuboid gazebo bench area
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
COMPLETE AUDI 80-100 SHIFT LEVER REPAIR KIT WITH IMPROVED BUSHING
...dexport
• sleeve - 1 pc. • elastic band - 1 pc. • hinge - 1 pc. audi 100c3 audi 100 c4 audi 80 b3 (checked) audi 80 b4 (checked)
3d_export
$7
REPAIR KIT FOR GEARSHIFT LEVER AUDI 80-100 IMPROVED
...ar of the gum is excluded. - rusk - 1 pc. - elastic band - 1 pc. audi 100c3 audi 100 c4 audi 80 b3 (checked) audi 80 b4 (checked)
3d_export
$30
cup mask machine front section stereo mask manufacturing machine improved version
...ing rack cad outsourcing list. the drawings are mature drawings that have been produced.<br>drawing version solidworks 2018
3d_export
free
oven - forno
...oven - forno
3dexport
gradually i'm trying to improve my 3d.
3d_export
$75
T-55
...nally, but these improvements made the tank more efficient and lethal. the t-55 was officially adopted by the soviet army in 1958
3d_export
$5
civil registration authorities
...civil registration authorities
3dexport
city wedding square. the model can be used for projects, to improve the project, etc.
Z
3d_export
$5
nissan z
...nissan z
3dexport
nissan z
3ddd
$1
Vase Z
...vase z
3ddd
vase z
3ddd
$1
полотенцесушить Z
...полотенцесушить z
3ddd
полотенцесушитель
полотенцесушить z
design_connected
free
Z-Chair
...z-chair
designconnected
free 3d model of z-chair designed by karman, aleksei.
design_connected
$11
Z Lamp
...z lamp
designconnected
phillips z lamp computer generated 3d model. designed by kalff, louis.
3d_export
$5
Dragon balls z
...dragon balls z
3dexport
dragon ball z
turbosquid
$20
Fighter Z
...
turbosquid
royalty free 3d model fighter z for download as on turbosquid: 3d models for games, architecture, videos. (1292563)
turbosquid
$9
Pen Z
...pen z
turbosquid
free 3d model pen z for download as obj on turbosquid: 3d models for games, architecture, videos. (1686775)
turbosquid
free
z chair
...z chair
turbosquid
free 3d model z chair for download as max on turbosquid: 3d models for games, architecture, videos. (1410230)
turbosquid
$5
Letter Z
...urbosquid
royalty free 3d model letter z for download as max on turbosquid: 3d models for games, architecture, videos. (1408540)