Thingiverse
![Ergo Mouse Shape using G305 PCB by Highball792](/previews/8073540.jpg)
Ergo Mouse Shape using G305 PCB by Highball792
by Thingiverse
Last crawled date: 3 years, 5 months ago
This is my design for an ergonomic mouse shape using the Logitech G305 PCB.
As this was my first attempt at designing something for 3D printing, the actual files I printed (Top and Base) are not perfect and some sanding is required to make all the components fit. Mainly, I found parts of the Top had to be sanded down to fit the PCB in. I also had to sand down the back of the on/off switch taken from the G305, as it was too tall and pushed up against the PCB (this didn't affect the usability of the on/off switch at all).
I also de-soldered the M1 and M2 mouse switches from their individual PCBs, superglued them directly onto the main PCB, and soldered the wires directly to the pins under the mouse switch (I believe the red wire should be soldered to the M1 middle pin, the white wire to the M2 middle pin, and the corresponding black wires to the front pins). Personally, I had to make the M1 and M2 button pressers on the top shell longer (I used tiny squares of electrical tape and a cut up plastic card) so the clicks didn't feel too heavy - I've since adjusted the length on the stl file, but I haven't printed it again, so I'm not sure if it's the right length.
I also bought a AAA battery holder and hot glued it to the top of the shell. There should be enough space for one that is around 50mm x 13mm x 12mm. I replaced the the battery wire completely, however, you can probably solder the battery wires to the battery holder wires. This added about 10g to the mouse, making it a total of 82g.
Finally, I've also added two stls for the general shape of the mouse (one with side buttons and one without), in case you want to try just the shape. I also made an imgur album with comparisons to the EC2-B as well as a size comparison with some other mice I own (https://imgur.com/a/HL0oEAM).
As this was my first attempt at designing something for 3D printing, the actual files I printed (Top and Base) are not perfect and some sanding is required to make all the components fit. Mainly, I found parts of the Top had to be sanded down to fit the PCB in. I also had to sand down the back of the on/off switch taken from the G305, as it was too tall and pushed up against the PCB (this didn't affect the usability of the on/off switch at all).
I also de-soldered the M1 and M2 mouse switches from their individual PCBs, superglued them directly onto the main PCB, and soldered the wires directly to the pins under the mouse switch (I believe the red wire should be soldered to the M1 middle pin, the white wire to the M2 middle pin, and the corresponding black wires to the front pins). Personally, I had to make the M1 and M2 button pressers on the top shell longer (I used tiny squares of electrical tape and a cut up plastic card) so the clicks didn't feel too heavy - I've since adjusted the length on the stl file, but I haven't printed it again, so I'm not sure if it's the right length.
I also bought a AAA battery holder and hot glued it to the top of the shell. There should be enough space for one that is around 50mm x 13mm x 12mm. I replaced the the battery wire completely, however, you can probably solder the battery wires to the battery holder wires. This added about 10g to the mouse, making it a total of 82g.
Finally, I've also added two stls for the general shape of the mouse (one with side buttons and one without), in case you want to try just the shape. I also made an imgur album with comparisons to the EC2-B as well as a size comparison with some other mice I own (https://imgur.com/a/HL0oEAM).
Similar models
thingiverse
free
![UL2 shape mouse for G304/G305](/t/4712059.jpg)
UL2 shape mouse for G304/G305
...to get an accurate shape but this is very similar aside from the hump being lower, sort of like...
thingiverse
free
![EC2 x G305 shell mod by Zhhy](/t/10232318.jpg)
EC2 x G305 shell mod by Zhhy
...mate, but i don't have rzaer viper ultimate bottom shell scanning file.
can you help me? thank you very much.
please comment.
thingiverse
free
![Round Logitech G305 Shell for improved claw/finger grip control. by woflborg](/t/8086020.jpg)
Round Logitech G305 Shell for improved claw/finger grip control. by woflborg
...v2 is more traditional horizontal button design, and so far the best mouse i've ever used for fps games
made with fusion 360.
thingiverse
free
![G305 AAA Centered Mount by HasseTelefax](/t/8246314.jpg)
G305 AAA Centered Mount by HasseTelefax
...ht distribution.
assembles using the 4 existing screws that hold the pcb to the shell.
feedback and posted makes are appreciated!
thingiverse
free
![Mini Mechanical Mouse by diagnosis](/t/8153964.jpg)
Mini Mechanical Mouse by diagnosis
...u/filibustercrankcase thanks!! edit, sept 30, 2020: i purchased another similar mouse recently, visually identical to the first mouse i...
thingiverse
free
![G305 side buttons pcb](/t/4977928.jpg)
G305 side buttons pcb
... modelling mice. these don't have the stock chinese switches, these are the japanese omron's so they're .15mm higher.
thingiverse
free
![Mouse Switch Spacer by diagnosis](/t/8366173.jpg)
Mouse Switch Spacer by diagnosis
...lder the switch back in place.
i'm not sure if this is often a problem or not, but hopefully this can help somebody else out!
thingiverse
free
![sdi305 - G305 fingertip modificiation](/t/4867209.jpg)
sdi305 - G305 fingertip modificiation
...holder, and removing the scroll wheel. optional modifications include removing the dpi toggle switch and mousewheel click switch.
thingiverse
free
![boloblinky by leidentech](/t/8848080.jpg)
boloblinky by leidentech
...a pixel per second the race game is something similar to one of the first programs i ever wrote...
thingiverse
free
![Throwie by Roothenoob](/t/9062596.jpg)
Throwie by Roothenoob
...on they positive side of the battery and the anode rested on the negative side of the battery.
i used tinkercad to make the stl.
G305
thingiverse
free
![G305 to FK1 ultralight](/t/4978361.jpg)
G305 to FK1 ultralight
...g305 to fk1 ultralight
thingiverse
gives a similar grip from a fk1 to a g305.
thingiverse
free
![g305 humps battery covers](/t/4911100.jpg)
g305 humps battery covers
...g305 humps battery covers
thingiverse
different battery cover with various humps for the g305
thingiverse
free
![G305 set](/t/4717681.jpg)
G305 set
...g305 set
thingiverse
for personal use to 3d print a 305 shell
thingiverse
free
![G305 Custom wheel by Rollingsloth](/t/10237174.jpg)
G305 Custom wheel by Rollingsloth
... width adjustment
thanks to @amotoma2(https://www.thingiverse.com/amotoma/designs) i could detect and fix an error in this model
thingiverse
free
![G305 AAA Centered Mount by HasseTelefax](/t/8246314.jpg)
G305 AAA Centered Mount by HasseTelefax
...ht distribution.
assembles using the 4 existing screws that hold the pcb to the shell.
feedback and posted makes are appreciated!
thingiverse
free
![g305 Custom Shell](/t/4922151.jpg)
g305 Custom Shell
...the height change. lod is appropriate now
added a smooth sided variant for those that may prefer a shape more like the g305 shell
thingiverse
free
![viper ultimate - G305 mod Zhhy edit by Zhhy](/t/9246291.jpg)
viper ultimate - G305 mod Zhhy edit by Zhhy
...utton is removed.
moer empty hexes to keep the weight down.
added place for g305 feet.
new side,(need glue)
i made it using sls.
thingiverse
free
![G305 side buttons pcb](/t/4977928.jpg)
G305 side buttons pcb
... modelling mice. these don't have the stock chinese switches, these are the japanese omron's so they're .15mm higher.
thingiverse
free
![Viper Ultimate - G305 Shell Swap Mod by Wiyum](/t/8367575.jpg)
Viper Ultimate - G305 Shell Swap Mod by Wiyum
...ons are for another mouse mod, but the idea is the same.
weight
fdm: ~70g
fdm ultralight: ~65g
resin: ~75g
resin ultralight: ~70g
thingiverse
free
![G305 AAA Battery Holder by JoeRandom32](/t/9674432.jpg)
G305 AAA Battery Holder by JoeRandom32
... rectangular one weighs 1 gram without support.
i printed with pla, 20% infill, 0.12 mm layer height, and default cura supports.
Ergo
turbosquid
$30
![ergo](/t/13374273.jpg)
ergo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
![HOESCH - ergo](/t/732474.jpg)
HOESCH - ergo
...hoesch - ergo
3ddd
hoesch , ванна
акриловая ванна hoesch-ergo размерами 2075х1075мм.
3ddd
$1
![MP3 Ergo Zen Clip](/t/736056.jpg)
MP3 Ergo Zen Clip
...o , mp3 , плеер
модель mp3 плеера ergo zen clip
3ddd
$1
![Ergo E32C20 LCD Tv](/t/609394.jpg)
Ergo E32C20 LCD Tv
...ergo e32c20 lcd tv
3ddd
ergo , телевизор
материалы и текстуры присутствуют
turbosquid
$9
![ERGO black coin](/t/13361862.jpg)
ERGO black coin
...id
royalty free 3d model ergo black coin for download as max on turbosquid: 3d models for games, architecture, videos. (1496182)
turbosquid
$9
![ERGO gold coin](/t/13361863.jpg)
ERGO gold coin
...uid
royalty free 3d model ergo gold coin for download as max on turbosquid: 3d models for games, architecture, videos. (1496179)
turbosquid
$20
![Rattan furniture ERGO](/t/13439007.jpg)
Rattan furniture ERGO
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
![Ergo Suspended Light](/t/13500532.jpg)
Ergo Suspended Light
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Ergo Road Handlerbars](/t/13248891.jpg)
Ergo Road Handlerbars
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
![Ergo Libs 3D Model](/t/1052105.jpg)
Ergo Libs 3D Model
...ergo libs 3d model
archive3d
сabinet case
Pcb
turbosquid
$19
![PCB assembly line.](/t/13522987.jpg)
PCB assembly line.
...mbly line. for download as 3ds, max, ige, obj, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1330649)
3ddd
$1
![GRAMERCY HOME - CARMELA ARMCHAIR 602.023-PCB](/t/994232.jpg)
GRAMERCY HOME - CARMELA ARMCHAIR 602.023-PCB
...gramercy home - carmela armchair 602.023-pcb
3ddd
gramercy home
gramercy home
carmela armchair
602.023-pcb
www.gramercy-home.ru
3d_export
$150
![auto pcb board loder inspection machine](/t/11492558.jpg)
auto pcb board loder inspection machine
...auto pcb board loder inspection machine
3dexport
auto pcb board loder & inspection machine --> only step file
3d_export
$7
![turning mechanism drawing pcb board turnover machine](/t/11888515.jpg)
turning mechanism drawing pcb board turnover machine
...turning mechanism drawing pcb board turnover machine
3dexport
turning mechanism drawing pcb board turnover machine
turbosquid
$9
![Stereo Jack 3.5mm for soldering to a PCB](/t/13326762.jpg)
Stereo Jack 3.5mm for soldering to a PCB
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![LED Right Angled PCB Mounting](/t/11379707.jpg)
LED Right Angled PCB Mounting
...m led. step and igus files. multiple led colors: blue, purple, red, green, and yellow. dimensions case w 4,5mm , h 7,3mm l 6,4mm.
3d_export
$20
![automatic pcb loading and unloading dispensing test automatic line](/t/11888156.jpg)
automatic pcb loading and unloading dispensing test automatic line
...ment structure is very complex. it is a very practical equipment for smt industry. the equipment is mature application equipment.
3d_export
$18
![an automatic line for fct function test of pcb](/t/11522317.jpg)
an automatic line for fct function test of pcb
... drawings are downloaded, you can directly watch and edit the contents. welcome to download and learn from your favorite friends.
3d_export
$5
![USB Micro B connector](/t/11371153.jpg)
USB Micro B connector
...step and igus for 3d import into ecad tools, pcb footprints. added also a altium designer pcb component library...
3d_export
$15
![plastic housing with dewalt battery holder](/t/11932042.jpg)
plastic housing with dewalt battery holder
...case measures 155x106x60. inside the case there are two pcb of 130x98 and 98x42...
Mouse
3d_export
$5
![mouse](/t/11424777.jpg)
mouse
...mouse
3dexport
stylish computer mouse
3d_export
$5
![mouse](/t/11424778.jpg)
mouse
...mouse
3dexport
stylish computer mouse
3ddd
$1
![Mouse](/t/602176.jpg)
Mouse
...mouse
3ddd
мышка
a simple mouse
3d_ocean
$5
![mouse](/t/795.jpg)
mouse
...ocean
3d models computer electronics mouse
silver color 3d mouse. this model has been locked to render. computer mouse 3d models.
archibase_planet
free
![Mouse](/t/950773.jpg)
Mouse
...mouse
archibase planet
computer mouse equipment technique
mouse - 3d model for interior 3d visualization.
archibase_planet
free
![Mouse](/t/948189.jpg)
Mouse
...mouse
archibase planet
mouse office computerization
pro mouse - 3d model for interior 3d visualization.
turbosquid
$30
![mouse trap with mouse](/t/13429748.jpg)
mouse trap with mouse
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
![Mouse and Mouse Pad](/t/13439228.jpg)
Mouse and Mouse Pad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
![mouse](/t/11888641.jpg)
mouse
...mouse
3dexport
computer mouse model. my customized version of logitech m171.
3d_ocean
$5
![Mouse](/t/572907.jpg)
Mouse
...ls bust characters model mouse sculpture statuette
3d model, statuette mouse. contents: 3d files fbx, obj,max(2011) + uv mapping.
Shape
archibase_planet
free
![Shape](/t/947831.jpg)
Shape
...shape
archibase planet
form shape
decor shape n070707 - 3d model for interior 3d visualization.
3d_export
$7
![shaped ball](/t/11426998.jpg)
shaped ball
...shaped ball
3dexport
shaped ball
3ddd
$1
![Shapes Aqua](/t/696224.jpg)
Shapes Aqua
...shapes aqua
3ddd
кальян
кальян shapes aqua
высота кальяна: 70 см.
производитель: shapes
3ddd
$1
![Кресло Shape](/t/864542.jpg)
Кресло Shape
...кресло shape
3ddd
tonon
кресло shape итальянской фирмы tonon
размер, см.: 73х61х63.
3d_ocean
$9
![6 Plexus Shapes](/t/904016.jpg)
6 Plexus Shapes
...us shape green points : 30397 polygons : 26626 plexus shape violet points : 28734 polygons : 25136 liquid shape 1 points : 454...
3ddd
$1
![Twist Shape](/t/718806.jpg)
Twist Shape
...twist shape
3ddd
скамья
уникальный и стильный скамья с twist shape в середине - s городской скамьи
archive3d
free
![Shape 3D Model](/t/1063477.jpg)
Shape 3D Model
...pe 3d model
archive3d
form shape
decor shape n070707 - 3d model for interior 3d visualization.
3d_export
$5
![bolted shape ring](/t/11920436.jpg)
bolted shape ring
...bolted shape ring
3dexport
bolted shape ring
3d_export
$5
![shape door knob](/t/11920722.jpg)
shape door knob
...shape door knob
3dexport
shape door knob
turbosquid
$13
![pear shape](/t/13341215.jpg)
pear shape
...bosquid
royalty free 3d model pear shape for download as stl on turbosquid: 3d models for games, architecture, videos. (1278323)
Using
3ddd
$1
![US flag](/t/918682.jpg)
US flag
...us flag
3ddd
флаг
us flag
3d_export
free
![Among us](/t/11464276.jpg)
Among us
...among us
3dexport
among us red
3d_export
free
![Among Us](/t/12209925.jpg)
Among Us
...among us
3dexport
this 3d-model of a character from the game "among us". it can be used as a toy or decoration.
3d_export
$6
![among us](/t/11495629.jpg)
among us
...among us
3dexport
doll from among us in red
3d_export
$5
![amoung us](/t/11493749.jpg)
amoung us
...amoung us
3dexport
amoung us character. was created by cinema 4d 19
3d_export
$5
![Humvee us](/t/11369427.jpg)
Humvee us
...humvee us
3dexport
humvee us 3d model good quality for animation
3d_export
$15
![among us](/t/11462334.jpg)
among us
...among us
3dexport
turbosmooth modifier can be used to increase mesh resolution if necessary
3d_export
$25
![mailbox us](/t/11531022.jpg)
mailbox us
...mailbox us
3dexport
low poly model mailbox us. modeling in the blender, texturing in substance painter
design_connected
$13
![Use Me](/t/4571529.jpg)
Use Me
...use me
designconnected
sitland use me computer generated 3d model. designed by paolo scagnellato.
3d_export
$5
![Among Us](/t/12787472.jpg)
Among Us
...rt
the among us model comes in a variety of colors that can be customized by anyone, and even works with little in the animation