Thingiverse
Engine Bechmark (Simplified) by MotoRider42HC
by Thingiverse
Last crawled date: 4 years, 10 months ago
This is a simplified version of the "Engine Benchmark" that is made for printers that are unable to print the original benchmark, and for those of us with larger nozzles.
I have doubled the size of the supports for the moving parts, so you will have to use a razor blade to cut them free.
I am currently 66% successful at printing this with a 0.6mm nozzle at 0.1mm layer height.
V3 is for 0.4mm nozzles.
V5 is for 0.6mm nozzles.
Good luck!
^_^
I have doubled the size of the supports for the moving parts, so you will have to use a razor blade to cut them free.
I am currently 66% successful at printing this with a 0.6mm nozzle at 0.1mm layer height.
V3 is for 0.4mm nozzles.
V5 is for 0.6mm nozzles.
Good luck!
^_^