GrabCAD
Engine 3W-342i-B2F
by GrabCAD
Last crawled date: 1 year, 10 months ago
Our national and international success is based on our 25 years Know How in designing and producing high quality 2 – stroke engines. The 39 years of industrial experience of our designer had been realized in our new range of engines representing the latest state of the art of 2-stroke technology. Having this in mind a new generation of mufflers had to be developed suitable to handle the higher degree of saturation and process of combustion efficiency. 3W developed these new types of mufflers. Now 3W- Modellmotoren GmbH is capable to deliver complete solutions of propulsion Systems.
3W-Engineering System
Use our Kow How and ask us for a quotation for your customs build engine. Design is done by 3D-modeling using CAD Pro Engineer, prototype engines by using Lost Wax moulding and / or Rapid Prototyping , test runs and mass production in our facilities.
3W – History
1985 Introduction of the first 2-stroke gasoline engine especially designed for airplane models : 3W-60
1986 Development and production of 3W-40 and 3W-80B2 opposed twin
1987 Development and production of 3W-35 as well as the first 2-cylinder in-line-engine : 3W-80R2
1988 Development and production of : 3W-120B2
1989 Development and production of 3W-70B2 as well as the first 4-cylinder 3W-240B4 and 3W-160B4
1991 Development and production of : 3W-48B2
1992 Development and production of 2-cylinder in-line engine 3W-120R2 as well as 3-cylinder in-line engine 3W-120R3. Quique Somenzini demonstrates the first torque-roll using 3W-70B2 at the TOC in Las Vegas.
1993 Development and production of 4-cylinder opposed 3W-140B4 and 3W-156B4
1994 Steve Stricker is the first pilot at the TOC , using a 4-cylinder opposed in his Extra with 3400 mm wing span : 3W-160B4. Quique Somenzini won this TOC with 3W-120B2
1994 / 1996 Most popular and spectacular manoeuvre at the TOC : Torque Roll. Most used engine 3W-120B2
1995 Start of the new i-serie representing a new cylinder and piston technology. First engines : 3W-70i and 3W-75i
1996 Steve Stricker wins the TOC with 3W-160B4 build in his Extra with a wing span of 3400mm. Development and production of : 3W-50i , 3W78iB2 and 3W-100iB2.
1997 3W received the patent no. 4408908 for its 2-stroke 3-cylinder radial engine 3W-105STR31998 Our cooperation of many years with Quique Somenzinileads to the development of the: QS-Engine serie. Quique Somenzini wins the TOC with his new 3W-150iB2 QS engine with 4 real transfer ports. Start with the development and production of : 3W-240iB2 opposed twin.
1998 Start of 3W´s own airplane model serie. These models are developed in cooperation with the world best pilots and are produced exclusively for 3W. The design of these airplane models are influenced by Peter Weinhold´s long time experience and knowledge of having build over 500 various models. The finishing touch is given by doing intensive flight test done by International Top Pilots like Wolfgang and Roland Matt. Both gentlemen are looking back at a long time experience in design and flying on top level.
1999 Quique Somenzini does the hat trick and wins again the TOC with 3W-150iB2 QS. Development of a flexible drive system for para glider : 3W-240iB2 Para.
2000 Development of a custom made 4-cylinder flat with 33.32cu.in. / 546ccm.
2001 Development and production of : 3W-200iB2
2002 Patent application in Europe and USA for a new muffler system. Development and production of a new 4-cylinder flat : 3W-212iB4. The 3rd. generation of ignitions is released. The programmable on board micro processor allows a special auto timing for our engines.
Technical specifications : 6,0V operation voltage, voltage range : 4,8V – 8,4 V
Temperature range : -40°C / + 65°C
Out put signal standard for connecting 3W´s digital RPM meter
2003 Design finished for the following engines : 3W-342iB2 , 2-cylinder flat; 3W-684iB4 , 4-cylinder flat, 3W-256 STR / 4-T , 5 cylinder radial, 4-stroke. Models : First prototypes of airplane models YAK 54 / 3050mm and Votec 322 / 3000mm are in the air for intensive test flying.
2004 At present 3W produces engines between : 1.46 and 41.74 cu.in. Twenty two different cylinder capacities are combined to forty seven different variations. Development and production of : 3W-28i / 3W-56iB2 and 3W-112iB4. Development of airplane model : PITTS S 12, wing span 3000mm.
2005 In the meantime 16 different airplane models are produced. Wing span range : 2000mm and 3950mm. To meet the special requirements of our international competition aerobatic pilots we deliver certain models in a special light Competition Version. This means the fuselage is made in composite using Kevlar – Honeycombs . All rudders have holes to save weight. Reinforcements are done by using carbon material.
2006 3W arranged the 1st. Rookie meeting to promote youngsters. This opportunity was taken to look for a new sponsor pilot for our team. Tim Stadler had been selected and since this year he is part of our team of sponsored pilots. Development and production of : 3W-275xiB2
2007 Development and production of : 3W-210XIB2. Development of Heavy Fuel Engines ( HFE )
2008 Development and production of : 3W-110iR2. Production and testing of 4 different HF engines : 3W-28iHFE / 3W-56iB2 HFE / 3W-110IB2TS HFE / 3W-157xiB2TS HFE.
2009 Development and production of : 3W-55xi. Development and production of : 3W-210xiB2 TS HFE
3W is the only Model Engine Manufacturer producing 4-cylinder and 6-cylinder 2-stroke flat engines. Competitors copied our engines and ignitions but with limited success. These plagiarisms are based on our technology of our 3W-80B2 and 3W-120B2 which were developed in 1986 and 1988.Our current engine technology is generations way off from this old technology. In a continues process our R &D department optimises the running characteristics, power and reliability.
3W is proud in being able to offer excellent flying airplane models well engineered. Useful accessories, mainly designed by 3W and produced for 3W complete the program.
Ignition System
3W-ignition systems and electronic components are designed and produced according to Industry Standards. Modern RISC –processor technology as well as selected components and a comprehensive Quality Control are the heard of a reliable system. The modellers benefit from specifications which are usually done for the industry. The ignition systems are laid out for a wide temperature range of : -40°C / +65°C. Suitable timing curves with automatic timing are standard with all 3W-engines as well as a strict quality control of all electronic parts. Several developments are tested momentarily and will set a new standard for 3W-Modellmotoren GmbH respectively power, reliability and life time.
Read more http://www.3w-modellmotoren.com/service/about-us.html
3W-Engineering System
Use our Kow How and ask us for a quotation for your customs build engine. Design is done by 3D-modeling using CAD Pro Engineer, prototype engines by using Lost Wax moulding and / or Rapid Prototyping , test runs and mass production in our facilities.
3W – History
1985 Introduction of the first 2-stroke gasoline engine especially designed for airplane models : 3W-60
1986 Development and production of 3W-40 and 3W-80B2 opposed twin
1987 Development and production of 3W-35 as well as the first 2-cylinder in-line-engine : 3W-80R2
1988 Development and production of : 3W-120B2
1989 Development and production of 3W-70B2 as well as the first 4-cylinder 3W-240B4 and 3W-160B4
1991 Development and production of : 3W-48B2
1992 Development and production of 2-cylinder in-line engine 3W-120R2 as well as 3-cylinder in-line engine 3W-120R3. Quique Somenzini demonstrates the first torque-roll using 3W-70B2 at the TOC in Las Vegas.
1993 Development and production of 4-cylinder opposed 3W-140B4 and 3W-156B4
1994 Steve Stricker is the first pilot at the TOC , using a 4-cylinder opposed in his Extra with 3400 mm wing span : 3W-160B4. Quique Somenzini won this TOC with 3W-120B2
1994 / 1996 Most popular and spectacular manoeuvre at the TOC : Torque Roll. Most used engine 3W-120B2
1995 Start of the new i-serie representing a new cylinder and piston technology. First engines : 3W-70i and 3W-75i
1996 Steve Stricker wins the TOC with 3W-160B4 build in his Extra with a wing span of 3400mm. Development and production of : 3W-50i , 3W78iB2 and 3W-100iB2.
1997 3W received the patent no. 4408908 for its 2-stroke 3-cylinder radial engine 3W-105STR31998 Our cooperation of many years with Quique Somenzinileads to the development of the: QS-Engine serie. Quique Somenzini wins the TOC with his new 3W-150iB2 QS engine with 4 real transfer ports. Start with the development and production of : 3W-240iB2 opposed twin.
1998 Start of 3W´s own airplane model serie. These models are developed in cooperation with the world best pilots and are produced exclusively for 3W. The design of these airplane models are influenced by Peter Weinhold´s long time experience and knowledge of having build over 500 various models. The finishing touch is given by doing intensive flight test done by International Top Pilots like Wolfgang and Roland Matt. Both gentlemen are looking back at a long time experience in design and flying on top level.
1999 Quique Somenzini does the hat trick and wins again the TOC with 3W-150iB2 QS. Development of a flexible drive system for para glider : 3W-240iB2 Para.
2000 Development of a custom made 4-cylinder flat with 33.32cu.in. / 546ccm.
2001 Development and production of : 3W-200iB2
2002 Patent application in Europe and USA for a new muffler system. Development and production of a new 4-cylinder flat : 3W-212iB4. The 3rd. generation of ignitions is released. The programmable on board micro processor allows a special auto timing for our engines.
Technical specifications : 6,0V operation voltage, voltage range : 4,8V – 8,4 V
Temperature range : -40°C / + 65°C
Out put signal standard for connecting 3W´s digital RPM meter
2003 Design finished for the following engines : 3W-342iB2 , 2-cylinder flat; 3W-684iB4 , 4-cylinder flat, 3W-256 STR / 4-T , 5 cylinder radial, 4-stroke. Models : First prototypes of airplane models YAK 54 / 3050mm and Votec 322 / 3000mm are in the air for intensive test flying.
2004 At present 3W produces engines between : 1.46 and 41.74 cu.in. Twenty two different cylinder capacities are combined to forty seven different variations. Development and production of : 3W-28i / 3W-56iB2 and 3W-112iB4. Development of airplane model : PITTS S 12, wing span 3000mm.
2005 In the meantime 16 different airplane models are produced. Wing span range : 2000mm and 3950mm. To meet the special requirements of our international competition aerobatic pilots we deliver certain models in a special light Competition Version. This means the fuselage is made in composite using Kevlar – Honeycombs . All rudders have holes to save weight. Reinforcements are done by using carbon material.
2006 3W arranged the 1st. Rookie meeting to promote youngsters. This opportunity was taken to look for a new sponsor pilot for our team. Tim Stadler had been selected and since this year he is part of our team of sponsored pilots. Development and production of : 3W-275xiB2
2007 Development and production of : 3W-210XIB2. Development of Heavy Fuel Engines ( HFE )
2008 Development and production of : 3W-110iR2. Production and testing of 4 different HF engines : 3W-28iHFE / 3W-56iB2 HFE / 3W-110IB2TS HFE / 3W-157xiB2TS HFE.
2009 Development and production of : 3W-55xi. Development and production of : 3W-210xiB2 TS HFE
3W is the only Model Engine Manufacturer producing 4-cylinder and 6-cylinder 2-stroke flat engines. Competitors copied our engines and ignitions but with limited success. These plagiarisms are based on our technology of our 3W-80B2 and 3W-120B2 which were developed in 1986 and 1988.Our current engine technology is generations way off from this old technology. In a continues process our R &D department optimises the running characteristics, power and reliability.
3W is proud in being able to offer excellent flying airplane models well engineered. Useful accessories, mainly designed by 3W and produced for 3W complete the program.
Ignition System
3W-ignition systems and electronic components are designed and produced according to Industry Standards. Modern RISC –processor technology as well as selected components and a comprehensive Quality Control are the heard of a reliable system. The modellers benefit from specifications which are usually done for the industry. The ignition systems are laid out for a wide temperature range of : -40°C / +65°C. Suitable timing curves with automatic timing are standard with all 3W-engines as well as a strict quality control of all electronic parts. Several developments are tested momentarily and will set a new standard for 3W-Modellmotoren GmbH respectively power, reliability and life time.
Read more http://www.3w-modellmotoren.com/service/about-us.html
Similar models
cg_trader
free
Engine 3W-342i-B2F
...eveloped these new types of mufflers. now 3w- modellmotoren gmbh is capable to deliver complete solutions of propulsion systems.
grabcad
free
4 Cylinder strokes vehicle engine and animation.
...trokes vehicle engine and animation.
grabcad
intake stroke, compression stroke, ignition stroke and power stroke are calculeted.
grabcad
free
4 stroke duel cylinder casing
...e.
it has super charging capability with the same piston used for power harnessing. and has ignition driven valve control system
grabcad
free
Six Stroke Engine
... stroke engine bottom end with an opposed
piston in the cylinder head working at half the cyclical rate
of the bottom piston
grabcad
free
car engine
...y providing different gear ratios.
engine block and components:
the engine block is the main structural component containing the
grabcad
free
ignition block for 3w
...ignition block for 3w
grabcad
it's an ignition block for the 3w-028i engine
grabcad
free
4 Stroke Engine
...4 stroke engine
grabcad
4 cylinder 4 stroke engine
grabcad
free
Four Cylinder Inline Engine
...four cylinder inline engine
grabcad
it is a 4-stroke; 4-cylinder inline engine commonly used in automobiles.
grabcad
free
4 Stroke Engine ( 1 cylinder)
...4 stroke engine ( 1 cylinder)
grabcad
1 cylinder engine, 4 strokes , air cooling
grabcad
free
4-Stroke 1-Cylinder Piston Engine
...4-stroke 1-cylinder piston engine
grabcad
4-stroke 1-cylinder piston engine
342I
cg_trader
free
Engine 3W-342i-B2F
...eveloped these new types of mufflers. now 3w- modellmotoren gmbh is capable to deliver complete solutions of propulsion systems.
grabcad
free
Boxer Impact Drill
...did that ! i was like let's take this https://grabcad.com/library/engine-3w-342ib2f and this https://grabcad.com/library/hand-drill-7 and then combine it ! there...
B2F
cg_trader
free
Engine 3W-342i-B2F
...eveloped these new types of mufflers. now 3w- modellmotoren gmbh is capable to deliver complete solutions of propulsion systems.
grabcad
free
Boxer Impact Drill
...did that ! i was like let's take this https://grabcad.com/library/engine-3w-342i-b2f and this https://grabcad.com/library/hand-drill-7 and then combine it ! there...
grabcad
free
Mudry CAP 10 New Concept
...weight: 830 kg (1,829 lb) powerplant: 1 × lycoming aeio-360-b2f 4-cylinder air-cooled, horizontally opposed, fuel injected piston engine, 180...
3dwarehouse
free
B2F
...b2f
3dwarehouse
3dwarehouse
free
B2F-2F
...b2f-2f
3dwarehouse
3dwarehouse
free
B2F(38.75)
...b2f(38.75)
3dwarehouse
3dwarehouse
free
tungwei泰和B2F-14F R3F
...tungwei泰和b2f-14f r3f
3dwarehouse
20121207作成 byhori
3dwarehouse
free
犬山西口ビル
...犬山西口ビル 3dwarehouse 居酒屋 クロキ(b2f) 居酒屋 五大陸(b2f) 天狗 横浜北幸店(b1f~b2f オリエンタルパサージュ(1f~4f) 白木屋横浜西口駅前店(7f) プロミス 横浜西口支店(8f) アコム横浜西口支店(9f) #japan #kanagawa #yokohama #日本...
3W
3ddd
$1
Favourite 1375-3W
...d
favourite
модель настенного светильника (подсветка картины) favourite 1375-3w. в архиве файлы в 2011 и 2014 версиях и obj-файл.
3ddd
$1
Favourite 1398-3W
...d
favourite
модель настенного светильника (подсветка картины) favourite 1398-3w. в архиве файлы в 2011 и 2014 версиях и obj-файл.
3ddd
free
Italux CALI MDM2052-3W
...italux cali mdm2052-3w
3ddd
italux
люстра italux cali. 3 лампы
3ddd
$1
Капитель N 1030-3W
...капитель n 1030-3w
3ddd
капитель
кто производитель я так и не понял, есть только название самой модели
3ddd
$1
TINKO_707
..., tinko тиффани бра tinko трёхламповое декоративное 707. код: [54018/3w ...
3ddd
$1
TINKO_708
..., tinko тиффани бра tinko трёхламповое декоративное 708. код: [54035/3w ...
3ddd
$1
TINKO_685
..., tinko тиффани бра tinko трёхламповое декоративное 685 .код: [54020/3w ...
3ddd
free
CAMERETTA ALLWOOD SET
...set 3ddd allwood , cameretta детская cameretta allwood set 3w стол и...
archive3d
free
Vase 3D Model
...vase 3d model archive3d vase glass vase vase 3w - 3d model for interior 3d...
3ddd
$1
TINKO_687
..., tinko тиффани бра tinko трёхламповое декоративное 687. код: [54042/3w ...
Engine
3d_export
$5
engine
...engine
3dexport
engine
3d_export
free
Engine
...engine
3dexport
engine
archibase_planet
free
Engine
...engine
archibase planet
motor engine
engine - 3d model for interior 3d visualization.
archibase_planet
free
Engine
...engine
archibase planet
motor engine mover
engine n170708 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Engine
...engine
archibase planet
engine locomotive train
locomotive - 3d model for interior 3d visualization.
turbosquid
$1
ENGINE
...osquid
royalty free 3d model ic engine for download as sldas on turbosquid: 3d models for games, architecture, videos. (1382781)
3d_export
$5
engine
...engine
3dexport
3d_export
free
engine
...engine
3dexport
turbosquid
$7
Engine
...d model animated engine mograph element3d for download as c4d on turbosquid: 3d models for games, architecture, videos. (1380716)
turbosquid
$1
ENGINE
...y free 3d model engine for download as max, 3ds, stl, and fbx on turbosquid: 3d models for games, architecture, videos. (1673703)