Ender 5 Plus / CR-10S Pro/Max TFT43 Case by mikes2277

Last crawled date: 3 years, 3 months ago

BTT TFT43 Case for the CR-10S Pro v2
This will allow you to mount the Big Tree Tech (BTT) TFT43 screen on the Creality CR-10S Pro v2. I found tons of really nice TFT35 but couldn't find a TFT43. I will eventually make a TFT70 version for those interested.
Other Printers
I am assuming it will also work on the CR-10S Pro, Ender 5 Pro, CR-X and CR-10 Max since, from what I can tell, they all use the same screen and shell config. I included the Fusion 360 files for this. This is my first self designed 3D printer project and also was learning Fusion 360 while making this, so no laughing :)
Credit where credit is due...
The case is designed from scratch but the mount plate inside the CR-10S Pro v2 is a modified version of https://www.thingiverse.com/thing:4370844. I tried to add it as a remix but Thingiverse couldn't find it when I tried :(
Required Hardware
4 - M3x18mm or M3x20mm socket head screws (holds the top of the case to the bottom)
2 - M3x10mm or M3x8mm socket or round head screws (hold the bottom case to the bracket). This will depend on how far you shove the heat inserts in.
2 - M3x4mm (5mm may work too, didn't try) heat inserts. I used these inserts
Supports
It is recommended to print with supports on build plate turned on so it keeps the screw insets from sagging and keeps the hole more perfectly round, but otherwise supports are not needed.
Flow Tuning
It is also recommended that you tune your slicer flow as described in Teaching Tech 3D Printer Calibration to get your tolerances in line with how the case was designed and tested for.
Filament
Translucent filament is recommended so you can see the knob lighting through the case but obviously not a requirement. I used Printed Solid Jessie Red Ice