Thingiverse
Ender 5 Double 5015 Fan Shroud and Ducts by Andrea_Botti
by Thingiverse
Last crawled date: 3 years ago
This part allows you to mount two 5015 fans on a Creality Ender 5, Ender 5 Pro, Ender 5 Max. I have not tested the Ender 3 or Ender 3 Pro, but I know that it doesn't work for the Ender 3 V2 due to a different location of some mounting holes.
The pictures also shows my Direct Drive Conversion Plate ( https://www.thingiverse.com/thing:4710174 ) but also works perfectly with the stock Bowden setup.
SHROUD
The mount screws into the stock carriage plate with no modifications required. A screw can be passed throug the slot on the right side of the carriage and tightened with a nut on the back (as shown in one of the pictures) for additional support. M4x20 screws are necessary to hold the two fans in place, plus 4 M3 screws for the hotend fan, and M3x10 screws which go into the plate.
DUCTS
The ducts can be printed both with normal FDM printers and Resin printers. I you're printing them with an FDM printer, ABS or PETG are recommended due ot them being close to heat sources.
The ducts are meant to ble hotglued to the fans. This ensures the best fit and an airtight seal, and is removable at any time if necessary.
I know it's not the best solution but this keeps the whole thing light and simple.
The pictures also shows my Direct Drive Conversion Plate ( https://www.thingiverse.com/thing:4710174 ) but also works perfectly with the stock Bowden setup.
SHROUD
The mount screws into the stock carriage plate with no modifications required. A screw can be passed throug the slot on the right side of the carriage and tightened with a nut on the back (as shown in one of the pictures) for additional support. M4x20 screws are necessary to hold the two fans in place, plus 4 M3 screws for the hotend fan, and M3x10 screws which go into the plate.
DUCTS
The ducts can be printed both with normal FDM printers and Resin printers. I you're printing them with an FDM printer, ABS or PETG are recommended due ot them being close to heat sources.
The ducts are meant to ble hotglued to the fans. This ensures the best fit and an airtight seal, and is removable at any time if necessary.
I know it's not the best solution but this keeps the whole thing light and simple.
Similar models
thingiverse
free
ExoSlide Fan Duct for 5015 Blower
...e-printer
you can use it on the creality hotends with exslide carriages, though the stock metal heatsink fan shroud will not fit.
thingiverse
free
I'm No Hero - Hot End Fan Shroud
...use the stock part fan or add the adapter and add a 40x40x10 fan. i may build an offset mount for the stock abl when i have time.
thingiverse
free
CR-10 Stock fan shroud 5015 Duct by lrpena
...a
thingiverse
5015 duct for stock fan shroud , should work on all cr-10 models and other printers that use this same shroud. .
grabcad
free
Creality Ender 3 fan shroud/duct
...component of the hot end fan shroud/duct fitted to the stock creality ender 3/3s and ender 4 s4/s5, cr-7 and ender 5 3d printers.
thingiverse
free
Ender 3 MAX Shroud for 40x40x20 Fan by vinceformosa
...b40202v2-0000-a99 fan. reused stock 4010 side fans and ducts. fan guard included but not necessary. works well for hiding screws.
grabcad
free
Creality Ender 3 OEM fan shroud/duct
...metal component of the hot end fan shroud/duct fitted to the creality ender 3/3s and ender 4 s4/s5, cr-7 and ender 5 3d printers.
thingiverse
free
Bora Duct Fan Mount for Ender 3/5 by sychan
...just the modified base plate. my print settings are similar ...
thingiverse
free
satsana ender 3 duct fan shroud with laser mount for stock fans by MachineTweak
...satsana ender 3 duct fan shroud with laser mount for stock fans by machinetweak
thingiverse
thingiverse
free
Ender 3 Pro fan shroud
... stock. so this fan shroud uses the ender 3 mounting points and a 40 mm fan.
it does however obscure the print sadly. your call.
thingiverse
free
Ender 3 Pro Dual Fan Duct 5015 support direct drive
...ender 3 pro dual fan duct 5015 support direct drive
thingiverse
i have edit
ender 3 pro dual fan duct 5015 support direct drive
Botti
3ddd
$1
Botti Suspension
...botti suspension
3ddd
botti
люстра botti suspension
3ddd
$1
Delightful botti
...delightful botti
3ddd
botti , delightful
delightful botti - люстра в виде духовых труб
design_connected
$11
Botti
...ed
photo-realistic 3d models of the botti light pendant from delightfull for 3d architectural and interior design presentations.
3ddd
$1
Delightfull / Botti
...delightfull / botti
3ddd
delightfull
delightfull - botti chandelier.
уникальная люстра для всех любителей джаза :)
3ddd
$1
Delightfull BOTTI Torsher
...delightfull botti torsher
3ddd
delightfull
http://www.delightfull.eu/ru/heritage/floor/botti-standing-lamp.php
3ddd
$1
Delightfull Botti
...delightfull botti
3ddd
delightfull
turbosmooth по вкусу, стек не свернут.
3d_ocean
$7
Delightfull - Botti Suspention Lamp/Chandelier
...ough details for close-up renders too. this package contains vray and mentalray versions of the lamp. also you will get the fb...
3d_sky
free
Delightful botti
...delightful botti
3dsky
botti
delightful botti - chandelier in the shape of brass pipes
3d_sky
$8
Delightfull / Botti
...delightfull / botti
3dsky
delightfull botti
delightfull-botti chandelier.
unique chandelier for all jazz lovers:)
3d_sky
free
Botti Suspend
...botti suspend
3dsky
chandelier botti suspend
5015
3ddd
$1
Скамья RUGIANO - COPERTINA BRONZA, 5015/130GL
...a bronza, 5015/130gl
3ddd
rugiano , скамья
скамья rugiano - copertina bronza, 5015/130gl
3d_export
$15
3d hair style for girl v94
...: 4811 - edges : 9836 - faces : 5015 - tris : 9642 - uvs : 5364 file...
thingiverse
free
5015 fan duct
...5015 fan duct
thingiverse
5015 fan duct
thingiverse
free
5015 Fan Guard
...5015 fan guard
thingiverse
5015 fan guard
3dfindit
free
294-5015
...294-5015
3dfind.it
catalog: wago
thingiverse
free
40MM to 5015 Adapter by 360alaska
...by 360alaska
thingiverse
this will adapt a 5015 fan to a 40mm fan mount. the 5015 fan mounts at a right angle and rotates fully.
thingiverse
free
Chiron 5015 blower by DK_Davis
...chiron 5015 blower by dk_davis
thingiverse
anycubic chiron 5015 blower
thingiverse
free
single 5015 to 50mnm by Kyledavis417
...single 5015 to 50mnm by kyledavis417
thingiverse
single 5015 to 50mm for tevo controller box
thingiverse
free
Cetus 3D 5015 Duct
...cetus 3d 5015 duct
thingiverse
twisted 5015 fan duct for cetus 3d mk2
thingiverse
free
Dual 5015 to 50mm by Kyledavis417
...dual 5015 to 50mm by kyledavis417
thingiverse
dual 5015 fan adapter for tevo tornado controller box
Andrea
3ddd
$1
Andrea Fanfani
...andrea fanfani
3ddd
andrea fanfani
cтол и стулья andrea fanfani, стол: арт.-687, кресло: арт.-726/p, стул: арт.-723
3ddd
$1
Люстра ANDREA
...bsp;
andrea xviii
технические детали:
масса 19.00 kg
мощность 18x40w
измерение 950×750 mm
картон 520x360x520 mm
сертификация 1-08
3ddd
$1
Комод Andrea Fanfani
... , комод , 2012
комод andrea fanfani, aрт.-2012
3ddd
$1
Andrea Fanfani
...шкаф фабрики andrea fanfani.
1700 х 660 х 2160 мм (шхгхв)
текстуры фасадов отрисованы в большом разрешении, прилагаются к модели.
3ddd
$1
Столик Andrea Fanfani
... andrea , fanfani
журнальный столик andrea fanfani
артикул 685
размеры (см) 127х73х46
3ddd
$1
Итальянское кресло Andrea
...итальянское кресло andrea
3ddd
andrea
итальянское кресло andrea. все текстуры и материалы в наличии, также файлы в формате fbx.
3ddd
free
Andrea (vers. B)
...andrea (vers. b)
3ddd
угловой
кожаный диван andrea (corona render)
3ddd
$1
Зеркало Andrea
...andrea
3ddd
резная рама , резьба , классика
:-d
3ddd
$1
Иллюстрации Andreas Preis
...ллюстрации , постер
коллекция серии работ иллюстратора andreas preis в рамках с паспарту
3d_export
$20
maybe chair by andrea borgogni
...maybe chair by andrea borgogni
3dexport
maybe chair by andrea borgogni model in rhino
Shroud
3d_export
$500
Centrifugal pump volute casing with impeller
...casing with impeller 3dexport volute casing with impeller and shroud ...
3d_export
$35
The Holy Face base relief 3D Model
...the holy face base relief 3d model 3dexport shroud turin veronica veronica's veil gospel ikon jesus holy face...
3d_export
$20
present car cloth presentation transport transportation shape concepts show celebration cover showro
...transportation shape concepts show celebration cover showroom covered revealin shroudd cover covering tarp draped fabric cloth showroom reveal revealing...
3d_export
$5
Lockheed F-117 Nighthawk lowpoly stealth bomber
...initial operating capability status in 1983. the aircraft was shroudd in secrecy until it was revealed to the public...
3d_export
$49
kriss vector gen 2 sub-d
...rear flip sight.<br>- vector ejection port.<br>- vector crb square shroud / 16"" sliencer.<br>- ds150 stock.<br>- .ma (maya 2020 ascii)<br>-...
3d_export
$10
vichy dining table
...in oak, sycamore and walnut marquetry.<br>even if the restaurant shroud the vichy in a long table cloth, two slender...
3d_export
$500
us navy pcu sterett ddg-104 arleigh burke class destroyer flight iia max
...the position has been shifted.<br>q. where are the exhaust shroud for the stacks?<br>a. since ddg-89, the exhaust system was...
thingiverse
free
shroud by samshay317
...shroud by samshay317
thingiverse
shroud
thingiverse
free
Fan Shroud
...fan shroud
thingiverse
this is a fan shroud for a 140mm fan
thingiverse
free
40mm fan shroud
...40mm fan shroud
thingiverse
40mm fan shroud
Ducts
turbosquid
$19
Duct Set
...d
royalty free 3d model duct set for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1145038)
turbosquid
$10
Duct Tape
...id
royalty free 3d model duct tape for download as ma and ma on turbosquid: 3d models for games, architecture, videos. (1580351)
turbosquid
free
Duct Tape
...
free 3d model duct tape for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1486518)
3d_ocean
$7
Air-duct
... ventilation
high quality industrial air duct ventilation model. created in cinema 4d but comes in various other formats as well.
turbosquid
$20
Air ducts
...lty free 3d model air ducts for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1262476)
3d_export
$10
Supply air duct
...supply air duct
3dexport
supply air duct with two axial fans and hangers
turbosquid
$2
Duct Tape
...e 3d model duct tape for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1473972)
turbosquid
free
Duct Tape
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$3
Duct tape
...polys. includes: cinema 4d project. model in 3 formats (obj, fbx, 3ds). 6 .tga texture maps (albedo, ambient occlusion, diffus...
turbosquid
$40
Ventilation Duct PACK
...tion duct pack for download as ma, obj, fbx, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1287068)
Ender
3ddd
$1
Enders / Elegance
...enders / elegance
3ddd
обогреватель
уличный газовый обогреватель enders elegance
высота: 2200 мм
3d_export
free
ender 3 frame cavity covers
... of the creality ender 3 - makes it look a bit more attractive it just slides into the open channels of the aluminium framework
turbosquid
$1
pen support for ender 3
...y free 3d model pen support for ender 3 for download as blend on turbosquid: 3d models for games, architecture, videos. (1611282)
3d_ocean
$9
Ender Dragon Minecraft
...ojang obj poly videogames
ender dragon minecraft created with cinema 4d r15 formats included: max 2013 – fbx 2012 – c4d r15 – obj
3d_export
free
Creality ender enclosure webcam mount
...e creality enclosure. sure is better than a tripod. change it up if it helps. i printed pla with 50% infill on my dd ender 3 pro.
3d_export
free
ender 3 enclosure corners
...er corners and 4 upper corners, using 25mmx25mm angled aluminium pieces that gets covered on inside of the frame with plexiglass
3d_export
free
ender 3 3d print bed clips
...ed + normal aluminium bed frame of the creality ender 3 = 6mm (b) these clips are designed for glass plate + aluminium bed = 4mm
3d_export
$5
GRUMPY CAT
...grumpy cat 3dexport grumpy cat to print in ender ...
3d_export
$5
Logs fire
...with one multi material for corona and vray r ender. albedo, normal, uvmap, roughness format jpg 4096x4096 models:...
3d_export
$42
excavator
...is the original size. 0.12 mm printing surface creality ender5 ...
Double
3ddd
free
Double
...double
3ddd
double , sicis
диван double от итальянской фабрики sicis next art
3d_ocean
$5
double stairs
...double stairs
3docean
double stairs
double stairs
3d_export
$5
double handle
...double handle
3dexport
double handle
3d_export
$5
double fastener
...double fastener
3dexport
double fastener
3ddd
$1
double bed
...double bed
3ddd
двуспальная
double bed
design_connected
free
Chair Double
...chair double
designconnected
free 3d model of chair double
3ddd
$1
Double Leaves
...double leaves
3ddd
double leaves
кресло китайской фабрики double leaves. vray, 3dmax 2013, гамма 2.2, текстуры в комплекте.
3ddd
free
Люстра Double
...люстра double
3ddd
double , david chipperfield
2004
размеры в архиве
3d_export
free
couch - double
...couch - double
3dexport
couch double with texture and .psd files for personal customization
3d_export
$10
double layer double speed chain
...d chain
3dexport
double layer speed chain (design very detailed) 3d model drawing model file reference using solidworks software
Fan
3d_export
$5
fan
...fan
3dexport
fan 3d model, table fan, fan, electric fan, ventilator
archibase_planet
free
Fan
...fan
archibase planet
fan large fan
fan out n260707 - 3d model for interior 3d visualization.
archibase_planet
free
Fan
...fan
archibase planet
fan ceiling fan ventilator
fan stealth n300615 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$15
fan
...fan
3dexport
is an ancient fan
3ddd
$1
Fan-C-Fan by marco gallegos
...n-c-fan by marco gallegos
3ddd
вентилятор , marco gallegos
fan-c-fan by marco gallegos
3d_export
$10
fan
...fan
3dexport
a detailed fan designed for home or space blowing is now available for only 19.99!
turbosquid
$1
Fan
...fan
turbosquid
free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1427865)
turbosquid
$14
Fan
...fan
turbosquid
royalty free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1415642)
3ddd
$1
Светильник Fan
...светильник fan
3ddd
fan , italamp
светильник fan, производитель italamp
turbosquid
$25
Fan
...fan
turbosquid
royalty free 3d model fan for download as c4d on turbosquid: 3d models for games, architecture, videos. (1483246)
5
turbosquid
$6
Rock 5-5
...urbosquid
royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)
3d_export
$5
hinge 5
...hinge 5
3dexport
hinge 5
turbosquid
$10
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Calligraphic Digit 5 Number 5
...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)
3ddd
$1
5 роз
...5 роз
3ddd
5 роз в стеклянной вазе
design_connected
$11
iPhone 5
...iphone 5
designconnected
apple iphone 5 computer generated 3d model.
3ddd
$1
Lola 5
...lola 5
3ddd
miniforms
lola 5 miniforms 300*65*134
3ddd
$1
Nexus 5
...dd
nexus , phone , телефон
google nexus 5 phone
3d_ocean
$15
iPhone 5
...iphone 5
3docean
3d 4d apple cinema iphone model modeling phone screen texture
iphone 5 3d model and texture realistic iphone 5.